Portál AbcLinuxu, 7. května 2025 09:55
[12617.053810] tda1004x: setting up plls for 48MHz sampling clock [12619.640275] tda1004x: timeout waiting for DSP ready [12619.683252] tda1004x: found firmware revision 0 -- invalid [12619.683256] tda1004x: trying to boot from eeprom [12622.365256] tda1004x: timeout waiting for DSP ready [12622.408716] tda1004x: found firmware revision 0 -- invalid [12622.408720] tda1004x: waiting for firmware upload... [12622.408723] firmware: requesting dvb-fe-tda10046.fw [12637.269856] tda1004x: found firmware revision 20 -- ok [12649.329983] tda1004x: setting up plls for 48MHz sampling clock [12649.636060] tda1004x: found firmware revision 20 -- ok [12685.598247] tda1004x: setting up plls for 48MHz sampling clock [12685.961649] tda1004x: found firmware revision 20 -- ok [14841.384978] tda1004x: setting up plls for 48MHz sampling clock [14841.728693] tda1004x: found firmware revision 20 -- ok [14853.905864] tda1004x: setting up plls for 48MHz sampling clock [14854.205350] tda1004x: found firmware revision 20 -- ok(prikladam jako soubor delsi vypis inicializace z dmesg) Problem ale je ze pri pokusu o nalezeni programu v Kaffeine to sice jede a ukazuje ruznej signal a obcas problikne svetyko Tuned, avsak do konzole to vypisuje toto:
smajchl@smajchl:~$ kaffeine /dev/dvb/adapter0/frontend0 : opened ( Philips TDA10046H DVB-T ) 0 EPG plugins loaded for device 0:0. Loaded epg data : 0 events (1 msecs) smajchl@smajchl:~$ DvbCam::probe(): /dev/dvb/adapter0/ca0: : není souborem ani adresářem Using DVB device 0:0 "Philips TDA10046H DVB-T" tuning DVB-T to 634000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "Philips TDA10046H DVB-T" tuning DVB-T to 674000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "Philips TDA10046H DVB-T" tuning DVB-T to 730000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "Philips TDA10046H DVB-T" tuning DVB-T to 778000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:3 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Using DVB device 0:0 "Philips TDA10046H DVB-T" tuning DVB-T to 818000000 Hz inv:2 bw:0 fecH:2 fecL:9 mod:3 tm:1 gi:2 hier:0 ............... Not able to lock to the signal on the given frequency Frontend closed dvbsi: Cant tune DVB Transponders: 5 dvbsi: The end :) Channels found: 0A nakonec to dobehne a zadne programy to nenajde, zkousel sem jeste kdetv a podobny programy taky bez vysledku. PS: v Kaffeine sem nastavil CR-Praha jako lokalitu, nevim presne jak to funguje... Prosim pomozte mi. Jadro mam 2.6.26 proste to nejnovejsi co je ve stable Debianu.
There is an insmod parameter for saa7134 "radio_nr" that specifies the number of radion device and ther is probably no "radio" flag parameter, by which you can turn the support on/off (use modinfo for more info). But if you want to use a radio and your doesn't have an EEPROM, you must set the "card" parameter explicitly and the board you set MUST have a builtin radion. Otherwise the radio just won't play, and no error message appears.(tady) avsak nevim jako teda co mam tomu modulu nastavit, cislo radio karty? to je co? A v jakym tvaru ma bejt ten model karty taky nechapu, tak kdyby mi nekdo s timto pomohl byl bych rad
Chtel bych si obcas nahrat neco z Radia 1. I kdyz asi pujde i ukladat internetovej stream, to je fakt....
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.