SUSE, standardne prostredie sa nespusta pri starte {init}

Pokud chceš přeinstalovat GRUB, tak grub-install /dev/hda (samozřejmě nahraď svým diskem). Pokud chceš jádru předat nějaký parametr, tak ho dopiš za ostatní parametry v /boot/menu.lst. Ale možná by stálo za to si přečíst, co za písmena to při bootu vypisuje ;-)

Já to s tou denacifikací Slovenska myslel vážně.

18.4.2010 13:19 Jendа | skóre: 78 | blog: Jenda | JO70FB
Rozbalit Rozbalit vše Re: SUSE, standardne prostredie sa nespusta pri starte {init}

/boot/grub/menu.lst, pardon.

Já to s tou denacifikací Slovenska myslel vážně.

18.4.2010 18:51 faidron | skóre: 16
Rozbalit Rozbalit vše Re: SUSE, standardne prostredie SUSE sa nespusta pri starte {init}

Příloha:

grub.txt (1454 bytů)

Myslim, ako nastavim proces spustania systemu s grafikou SUSE (defaultne nastavenie), s tym ze teraz sa mi zobrazuju velke pismena pocas stavu spustania jednotlivych demonov {OK}. Pouzitim klavesy ESC sa tiez, dalo prepnut z graf menu do textoveho rezimu.

cat /boot/grub/menu.lst v prilohe

Co je v tomto dolezite:

hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer                           
  [Created at bios.464]
  Unique ID: rdCR.fRULN9k9OD4
  Hardware Class: framebuffer
  Model: "Intel(r)Cantiga Graphics Controller"
  Vendor: "Intel Corporation"
  Device: "Intel(r)Cantiga Graphics Controller"
  SubVendor: "Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS"
  SubDevice: 
  Revision: "Hardware Version 0.0"
  Memory Size: 63 MB + 960 kB
  Memory Range: 0xc0000000-0xc3feffff (rw)
  Mode 0x0305: 1024x768 (+1024), 8 bits
  Mode 0x0317: 1024x768 (+2048), 16 bits
  Mode 0x0318: 1024x768 (+4096), 24 bits
  Mode 0x0312: 640x480 (+2560), 24 bits
  Mode 0x0314: 800x600 (+1600), 16 bits
  Mode 0x0315: 800x600 (+3200), 24 bits
  Mode 0x0301: 640x480 (+640), 8 bits
  Mode 0x0303: 800x600 (+832), 8 bits
  Mode 0x0311: 640x480 (+1280), 16 bits
  Config Status: cfg=new, avail=yes, need=no, active=unknown

cat /etc/sysconfig/bootsplash
## Path:	System/Boot
## Description:	enables/disables bootup graphics
## Type:	yesno
## Default:	yes
#
# SPLASH can be set to "no" to turn off the splash-screen on console 1
# at boot time (after kernel load).
#
# SPLASH=no to disable the splash screen
#
# SPLASH=yes to show the splash screen
#
SPLASH="yes"

## Path:	System/Boot
## Description:	selects bootsplash graphics theme
## Type:	string
## Default:	""
#
# Bootsplash theme. Should be based in /etc/bootsplash/themes/.
#
THEME="SLED"

ls /etc/bootsplash/themes/SLED/
bootloader  cdrom  config  images  LICENSE

Add a "vga=" option to the end of the line, and put in the code from the table above. So if you want 1024x768 at 16 bit color at command line, add "vga=0x317" to the end of your kernel parameters. This is the option I like to use most. You also can use the decimal equivalent, since 0x317 is in hex. The decimal equivalent is 791, so you'd use "vga=791" instead.

You can set "vga=ask" in your menu.lst file to force the kernel to ask you what resolution you prefer each time, but you will choose from a rather small list of options. You can type "scan" to have it check your hardware to see which modes it is capable of, but this is mainly for compatibility issues, and it won't give you as complete of a list as above, and you cannot type in 791, or 0x317 here, only a number from 0 to 9 from the list it gives you.

18.4.2010 22:02 faidron | skóre: 16
Rozbalit Rozbalit vše Re: SUSE, standardne prostredie sa nespusta pri starte {init}

je to vyriesene mozte na koniec retazca pridat parameter vga=ask, ale lepsie je zistit te mod ktory mate podporovany napriklad:

hwinfo --framebuffer | mode

alebo rovno vga=0x317, je to mozne pridat aj cez yast2, v ponuke bootloader kde pod tlacitkom edit najdete kolonku vga mode

Dotaz: SUSE, standardne prostredie sa nespusta pri starte {init}

Odpovědi