Portál AbcLinuxu, 13. května 2025 23:51

Dotaz: xorg.conf - jak prosím určím výchozí monitor

26.4.2010 23:48 matata | skóre: 13
xorg.conf - jak prosím určím výchozí monitor
Přečteno: 649×
Odpovědět | Admin
Ahoj, toto je muj xorg.conf: Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Synaptics Touchpad" EndSection

Section "Files" FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection

Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "type1" Load "vbe" EndSection

Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "hpnc6000" Option "XkbLayout" "us" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection

Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection

Section "Monitor" Identifier "Built-in LCD" Option "DPMS" EndSection

Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection

Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection

Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1366x768" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" EndSection

Section "Device" Identifier "ATI Mobility Radeon 9600" Driver "radeon" Option "DynamicClocks" "true" Option "MergedFB" "true" Option "CRT2Position" "LeftOf" Option "MetaModes" "1366x768-1280x1024 1366-768" Option "MergedNonRectangular" "true" BusID "PCI:1:0:0" EndSection

Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:1:0:0" EndSection

Section "Screen" Identifier "Default Screen" Device "ATI Mobility Radeon 9600" Monitor "Built-in LCD" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1366x768" EndSubSection EndSection

Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 1024 Depth 24 EndSubSection EndSection

Section "DRI" Mode 0666 EndSection Funguje to relativne dobre, ale lišty a ikony mam na NTB, ja bych je ale potreboval mit na Externim monitoru a na NTB jen rozsirit plochu... jak prosim urcim, ktery monitor je výchozí?

A pak jeste jeden problem... tento prikaz - xrandr -s 1366x768 mi vypne externi monitor a zustane jen NTB, to je v poradku ale nejde mi to nahodit zpet. Zkousim tento prikat xrandr -s 2646x768 a nejde to zkousel jsem i xrandr -s 2646x1024 ale taky to neslo... jaky prikaz tam mam zadat prosim... diky.
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

27.4.2010 00:23 Petr Šobáň | skóre: 80 | blog: soban | Olomouc
Rozbalit Rozbalit vše Re: xorg.conf - jak prosím určím výchozí monitor
Odpovědět | | Sbalit | Link | Blokovat | Admin
A můžeš nám vysvětlit kdo tu hatmatilku má luštit? On tag <pre> nefunguje? Co takhle číst tu nápovědu?
27.4.2010 08:48 matata | skóre: 13
Rozbalit Rozbalit vše Re: xorg.conf - jak prosím určím výchozí monitor
omlouvám se a posilam jeste jednou otagovane 
Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "bitmap"
	Load  "dbe"
	Load  "ddc"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "record"
	Load  "type1"
	Load  "vbe"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "off"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "hpnc6000"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ExplorerPS/2"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "Monitor"
	Identifier   "Built-in LCD"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Monitor"
	Identifier   "0-CRT1"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1280x1024"
	Option	    "TargetRefresh" "75"
	Option	    "Position" "0 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Monitor"
	Identifier   "0-LVDS"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1366x768"
	Option	    "TargetRefresh" "60"
	Option	    "Position" "1280 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Device"
	Identifier  "ATI Mobility Radeon 9600"
	Driver      "radeon"
	Option	    "DynamicClocks" "true"
	Option	    "MergedFB" "true"
	Option	    "CRT2Position" "LeftOf"
	Option	    "MetaModes" "1366x768-1280x1024 1366-768"
	Option	    "MergedNonRectangular" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	Option	    "Monitor-CRT1" "0-CRT1"
	Option	    "Monitor-LVDS" "0-LVDS"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Mobility Radeon 9600"
	Monitor    "Built-in LCD"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1366x768"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Virtual   2646 1024
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Založit nové vlákno • Nahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.