Dotaz: Jak pripojit usb zarizeni (disk v set top boxu)

[polo23]

Ahoj,
potreboval bych poradit s pripojenim HDD, ktery je v set top boxu s usb konetorem. V navodu k set top box je psano ze se da spojit s PC a je mozne prenaset data... Kdyz vsak set top box propojim s PC nic se automaticky nepripoji (napr. jako flash disk).

Pouzivam Debian Lenny, kernel 2.6.30. Vystup prikazu lsusb:

lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 0471:0222 Philips Creative Nomad Jukebox
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0a5c:2145 Broadcom Corp. 
Bus 002 Device 002: ID 08ff:2810 AuthenTec, Inc. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 005 Device 003: ID 0471:0222 Philips Creative Nomad Jukebox

Z vystupu je patrne ze system zarizeni vidi, ale jak ho namountovat jako disk me nenapada (fdisk -l nevidi zadne dalsi zarizeni krom meho HDD):( Neni potreba zavedeni modulu (ovladace) k tomuto zarizeni?

Diky za pripadne nasmerovani.

Odpovědi

[houska]

ukaz co ukaze dmesg po pripojeni

[polo23]

Vypis z dmesg:

[52418.716035] usb 5-1: new full speed USB device using uhci_hcd and address 6
[52418.891091] usb 5-1: New USB device found, idVendor=0471, idProduct=0222
[52418.891098] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[52418.891262] usb 5-1: configuration #1 chosen from 1 choice