Dotaz: PPTP a připojení na server s Windows

[spectrum]

Zdravím,

už si s tím nevím rady a nastavení mi přitom (podle návodu) přijde správné...

sudo pon server debug dump logfd 2 nodetach noauth

vrací tento ladící výstup:

pppd options in effect:
debug        # (from command line)
nodetach        # (from command line)
logfd 2        # (from command line)
dump        # (from command line)
noauth        # (from command line)
name domena\\uzivatel        # (from /etc/ppp/peers/server)
remotename PPTP        # (from /etc/ppp/peers/server)
 # (from /etc/ppp/options.pptp)
pty pptp server.cz --nolaunchpppd        # (from /etc/ppp/peers/server)
crtscts        # (from /etc/ppp/options)
 # (from /etc/ppp/options)
asyncmap 0        # (from /etc/ppp/options)
lcp-echo-failure 4        # (from /etc/ppp/options)
lcp-echo-interval 30        # (from /etc/ppp/options)
hide-password        # (from /etc/ppp/options)
ipparam server        # (from /etc/ppp/peers/server)
nobsdcomp        # (from /etc/ppp/options.pptp)
nodeflate        # (from /etc/ppp/options.pptp)
noipx        # (from /etc/ppp/options)
using channel 29
Using interface ppp0
Connect: ppp0 <--> /dev/pts/7
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x0 <mru 1400> <auth eap> <magic 0x628636da> <pcomp> <accomp> <callback CBCP> <mrru 1614> <endpoint [local:b6.2d.f7.f6.95.6b.4d.ff.80.03.11.0d.0c.04.ae.74.00.00.00.00]>]
No auth is possible
sent [LCP ConfRej id=0x0 <auth eap> <callback CBCP> <mrru 1614>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
rcvd [LCP TermReq id=0x1 "b\377777776066\37777777732\000<\37777777715t\000\000\003\37777777627"]
sent [LCP TermAck id=0x1]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x3f8fd38d> <pcomp> <accomp>]
Modem hangup
Connection terminated.
Script pptp server.cz --nolaunchpppd finished (pid 11918), status = 0x0

Dokázal by v tom někdo najít chybu? Resp. co je zřejmě špatně, je to chyba klienta, jeho nastavení, nebo si se serverem nevím rady? Divný je ten řádek "No auth is possible". Zdá se mi, že server vynucuje eap a klient to neumí? Používám stabilní Debian.

Předem díky.

Na otázku zatím nikdo bohužel neodpověděl.