Portál AbcLinuxu, 5. května 2025 23:31
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux ks*****.kimsufi.com 2.6.38.2-grsec-xxxx-grs-ipv6-64 #1 SMP Fri Apr 15 17:44:15 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/bzImage-2.6.38.2-xxxx-grs-ipv6-64 root=/dev/sda1 ro quiet
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois kibi@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 14:16:02 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
FATAL: Could not load /lib/modules/2.6.38.2-grsec-xxxx-grs-ipv6-64/modules.dep: No such file or directory
(EE) [drm] drmOpen failed.
(EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI.
SELinux: Disabled on system, not enabling in X server
Nechal jsem teda přes depmod vytvořit modules.dep, ale moc to nepomohlo viz. nová chyba
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux ks*****.kimsufi.com 2.6.38.2-grsec-xxxx-grs-ipv6-64 #1 SMP Fri Apr 15 17:44:15 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/bzImage-2.6.38.2-xxxx-grs-ipv6-64 root=/dev/sda1 ro quiet
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois kibi@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 14:36:35 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory
FATAL: Module via not found.
(EE) [drm] drmOpen failed.
(EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI.
SELinux: Disabled on system, not enabling in X server
a v logu je
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux ks*****.kimsufi.com 2.6.38.2-grsec-xxxx-grs-ipv6-64 #1 SMP Fri Apr 15 17:44:15 UTC 2011 x86_64
Kernel command line: BOOT_IMAGE=/boot/bzImage-2.6.38.2-xxxx-grs-ipv6-64 root=/dev/sda1 ro quiet
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois kibi@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 14:36:35 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |--Screen "Default Screen Section" (0)
(**) | |--Monitor "default monitor"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 1106:3344:1043:3344 VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] rev 1, Mem @ 0xf4000000/67108864, 0xfa000000/16777216, BIOS @ 0x????????/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
X bych potřeboval spustit pro přenos obrazu přes VNC. Pokud jsou i jiné možnosti vzdáleného ovládání s GUI, tak mi postačí rady jak na to.
21.7.2011 12:14
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01)
a ovladač bych řekl že je v jádře, ale jistě to nevím. Jedná se o předinstalované distro od OVH.
A nějaký lepší popis jak na to? V linuxu se vyznám jen v opravdových základech. Našel jsem, že pro tuto grafiku je ovladač viafb. Zkoušel jsem
apt-get install viafbale neuspěl jsem.
21.7.2011 12:39
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
Mam něco podobnýho - CN1000G, večer snad doplnim víc.
21.7.2011 23:45
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
Takže asi máme to samé ....
# lspci -s 01:00.0 -vvv
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3 UniChrome Pro]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
Kernel modules: viafb
root@NX02:/home/vencour#konfigurák Xek je jen defaultní, muj log v příloze, čerstvě jsem "to" přeinstaloval novým xubuntu a v logu vidim mj. r# grep "module " /var/log/Xorg.0.log [ 23.777] compiled for 1.10.1, module version = 1.0.0 [ 23.813] compiled for 1.10.1, module version = 1.0.0 [ 23.909] compiled for 1.10.1, module version = 1.0.0 [ 23.937] compiled for 1.10.1, module version = 1.13.0 [ 23.947] compiled for 1.10.1, module version = 1.0.0 [ 23.951] compiled for 1.10.1, module version = 1.2.0 [ 23.983] compiled for 1.10.0, module version = 0.2.904 [ 23.996] compiled for 1.10.0, module version = 2.3.0 [ 24.006] compiled for 1.10.0, module version = 0.4.2 [ 24.010] (II) Loading sub module "fbdevhw" [ 24.085] compiled for 1.10.1, module version = 0.0.2 [ 24.086] (II) Loading sub module "vgahw" [ 24.097] compiled for 1.10.1, module version = 0.1.0 [ 24.110] (II) Loading sub module "i2c" [ 24.110] (II) Loading sub module "ddc" [ 24.559] (II) Loading sub module "fb" [ 25.069] compiled for 1.10.1, module version = 1.0.0 [ 25.070] (II) Loading sub module "xaa" [ 25.128] compiled for 1.10.1, module version = 1.2.1 [ 25.128] (II) Loading sub module "ramdac" [ 25.720] (II) [drm] loaded kernel module for "via" driver. [ 27.549] compiled for 1.10.0.902, module version = 2.6.0ohledně drajvru pro Xka vedu ...
# aptitude search chrome i xserver-xorg-video-openchrome - X.Org X server -- VIA display driver
apt-get install xserver-xorg-video-openchromejsem zjistil, že ovladače jsou nainstalovaný a aktuální, ale po připojení přes VNC se nic nezměnilo.
/usr/share/doc/xserver-xorg/examples
Je to tam správně nebo ten soubor má být jinde? Všechno to byly jenom komentáře, tak jsem odkomentoval
Section "Device"
Identifier "Video Card"
Driver "openchrome"
Option "AccelMethod" "EXA"
Option "Monitor-LVDS" "Monitor1"
Option "Monitor-VGA" "Monitor2"
Driver bylo nastavený na vesa, tak jsem to změnil na openchrome/etc/?
ale ale , snad /etc/X11/xorg.conf
Mělo by stačit toto:
21.7.2011 15:07
Section "Device"
Identifier "Video Card"
Driver "openchrome"
EndSection
FATAL: Module via not found. (EE) [drm] drmOpen failed. (EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI. SELinux: Disabled on system, not enabling in X servera v logu je
drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: node name is /dev/dri/card0 [drm] failed to load kernel module "via" (EE) [drm] drmOpen failed. (EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI.
Asi máš špatně ten konfigurák (nebo máš někde ještě druhý s vyšší prioritou, než je ten tvůj). Protože se to má snažit načíst modul openchrome a ne via. Ono je vůbec divné, že jsi tam před tím žádný neměl.
root@ks*****:~# locate xorg.conf /etc/X11/xorg.conf /usr/share/X11/xorg.conf.d /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/20-wacom.conf /usr/share/X11/xorg.conf.d/50-synaptics.conf /usr/share/doc/xserver-xorg/examples/xorg.conf /usr/share/doc/xserver-xorg-video-nouveau/examples/xorg.conf /usr/share/man/man5/xorg.conf.5.gzten v /etc/X11/ je ten co jsem vytvořil...
Tak ja treba na netbooku s grafikou co mas ty mam v /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
#option "RandR" "flse"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "record"
Load "ddc"
Load "dri2"
Load "dbe"
Load "glx"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "1024x600" 48.07 1024 1064 1168 1312 600 601 604 621
Modeline "1024x600" 47.26 1024 1064 1168 1312 600 601 604 621
EndSection
Section "Device"
Identifier "Card0"
Driver "openchrome"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
option "EnableAGPDMA" "true"
option "ActiveDevice" "LCD"
option "VBEModes" "true"
option "SWCursor" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600" "800x600" "640x480"
EndSubSection
EndSection
Section "Modes"
Identifier "Modes"
Modeline "1024x600" 48.07 1024 1064 1168 1312 600 601 604 621
Modeline "1024x600" 47.26 1024 1064 1168 1312 600 601 604 621
EndSection
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.