Portál AbcLinuxu, 4. května 2025 17:37
Dobrý den,
potřebuji poradit s tímto problémem, google nepomáhá
mám OpenSUSE 12.2 a PC pravidelně několikrát deně zamrzá, obraz na monitoru zůstane statický, HDD problikává, k PC se nelze připojit ssh, http nereaguje a acpi vypnutí, pomůže jedině restart
Poslední výpis v logu byl od rsyslogd žádná chybová zpráva jen začátek řádku
Nahradil jsem ho syslogd ten pro změnu nelogoval vůbec
Nahradil jsem ho syslog-ng, poslední zpráva před zamrznutím je:
syslog-ng[624]: Log statistics; processed='destination(mailwarn)=0', processed='center(received)=0', processed='destination(mailerr)=0', processed='destination(mailinfo)=2', processed='destination(console)=30', processed='source(src)=6241', processed='destination(newserr)=0', processed='destination(newsnotice)=0', processed='destination(messages)=1348', processed='destination(localmessages)=0', processed='global(payload_reallocs)=455', processed='global(sdata_updates)=0', processed='center(queued)=0', processed='destination(xconsole)=30', processed='destination(newscrit)=0', processed='destination(netmgm)=0', processed='src.internal(src#0)=12', stamp='src.internal(src#0)=1357761550', processed='destination(devnull)=0', processed='global(msg_clones)=0', processed='source(chroots)=0', processed='destination(warn)=30', processed='destination(acpid)=0', processed='destination(firewall)=4891', processed='destination(mail)=2'
nevím co s tím
10.1.2013 16:15
rADOn | skóre: 44
| blog: bloK
| Praha
Analýzu hw jsem provedl a myslím že je OK, spíš bych řekl, že se jedná o dw problém, protože když jsem použil syslogd, sice logování neprobíhalo (log byl prázdný) ale systém nezamzzal
# smartctl --all /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.4.11-2.16-desktop] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: OCZ-AGILITY3
Serial Number: **************
LU WWN Device Id: 5 e83a97 edab0de8a
Firmware Version: 2.15
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jan 10 21:00:45 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 080 080 050 Pre-fail Always - 0/10513287
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 1
9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6349h+35m+19.420s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 557
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 1
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 13
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 3
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 1
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/10513287
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 1
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/10513287
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/10513287
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 5078
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 1994
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 1994
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 3570
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Vycházím z toho, že když odstraním syslog-ng a rsyslog tak k problému nedochází...
RAM a swap dostatek
10.1.2013 21:31
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.