Portál AbcLinuxu, 13. května 2025 00:38
make menuconfig asi vsetky ovladace zvukovych kariet.
Mam dojem, ye bz to mohlo bzt v make.conf a hodnote ALSA_CARDS="snd-hda-intel".
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
aplay --list-devices
aplay: device_list:274: no soundcards found...
cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
COMMON_FLAGS="-O2 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
USE="elogind alsa"
# NOTE: This stage was built with the bindist Use flag enabled
PORTDIR="/var/db/repos/gentoo"
DISTDIR="/var/cache/distfiles"
PKGDIR="/var/cache/binpkgs"
# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C
GENTOO_MIRRORS="https://mirror.wheel.sk/gentoo"
VIDEO_CARDS="intel"
ALSA_CARDS="snd-hda-intel"
ALSA_PCM_PLUGINS="*"
ACCEPT_LICENSE="*"
Subor /etc/asound.conf neexistuje.
Adresar /sys/class/sound/card*/ neexistuje.
Kdepak soudruch z vychodu udelal chybu?
Řešení dotazu:
<code>lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo ThinkPad T400
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
lspci: Unable to load libkmod resources: error -12
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Lenovo Mobile 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1800 [size=8]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 3
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Mobile 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0
Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo ThinkPad T400
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f2926800 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo ThinkPad T400
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f2700000 (32-bit, non-prefetchable) [size=128K]
Memory at f2925000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1840 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1860 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 18a0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f2926c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo ThinkPad T400
Flags: fast devsel, IRQ 17
Memory at f2920000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: c0000000-c01fffff [size=2M]
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 1
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 25
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: f2500000-f25fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 2
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 26
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: f2600000-f26fffff [size=1M]
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Lenovo 82801I (ICH9 Family) PCI Express Port 3
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 18c0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 18e0 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1c00 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f2927000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Capabilities: [50] Subsystem: Lenovo 82801 Mobile PCI Bridge
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo ThinkPad T400
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo ThinkPad T400
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 27
I/O ports at 1c48 [size=8]
I/O ports at 183c [size=4]
I/O ports at 1c40 [size=8]
I/O ports at 1838 [size=4]
I/O ports at 1c20 [size=32]
Memory at f2926000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo ThinkPad T400
Flags: medium devsel, IRQ 23
Memory at f2927400 (64-bit, non-prefetchable) [size=256]
I/O ports at 1c60 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300
Subsystem: Intel Corporation Ultimate N WiFi Link 5300
Flags: fast devsel, IRQ 17
Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 00-21-6a-ff-ff-36-66-0c
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 11)
Subsystem: Intel Corporation Turbo Memory Controller
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f2600000 (32-bit, non-prefetchable) [size=1K]
I/O ports at 2000 [size=256]
Expansion ROM at f2610000 [virtual] [disabled] [size=64K]
Capabilities: [48] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [68] Express Legacy Endpoint, MSI 01
</code>
Driver mas.
Co ukazuje alsamixer?
A ide Ti?:
mplayer -ao alsa *
Inac poveda, mas spustene pulseaudio (server) ako lokalneho pouzivatela?
<code>alsamixer
cannot open mixer: No such file or directory</code>
mplayer nemam, tak mpv.
<code> # mpv -ao alsa song68.mp3
The legacy option syntax ('-ao value') is deprecated and dangerous.
Please use '--ao=value'.
[ffmpeg/demuxer] mp3: Estimating duration from bitrate, this may be inaccurate
(+) Audio --aid=1 (mp3 2ch 44100Hz)
File tags:
Title: song68.mp3
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/confmisc.c:767:(parse_card) cannot find card '0'
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/conf.c:4693:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/conf.c:4693:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/confmisc.c:1246:(snd_func_refer) error evaluating name
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/conf.c:4693:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/conf.c:5181:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.2.2-r1/work/alsa-lib-1.2.2/src/pcm/pcm.c:2642:(snd_pcm_open_noupdate) Unknown PCM default
[ao/alsa] Playback open error: No such file or directory
[ao] Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Audio: no audio
Exiting... (Errors when loading file)
</code>
meno@maschina:/etc/alsa$ tree
.
└── conf.d
├── 10-rate-lav.conf -> /usr/share/alsa/alsa.conf.d/10-rate-lav.conf
├── 10-samplerate.conf -> /usr/share/alsa/alsa.conf.d/10-samplerate.conf
├── 10-speexrate.conf -> /usr/share/alsa/alsa.conf.d/10-speexrate.conf
├── 50-arcam-av-ctl.conf -> /usr/share/alsa/alsa.conf.d/50-arcam-av-ctl.conf
├── 50-jack.conf -> /usr/share/alsa/alsa.conf.d/50-jack.conf
├── 50-oss.conf -> /usr/share/alsa/alsa.conf.d/50-oss.conf
├── 50-pulseaudio.conf -> /usr/share/alsa/alsa.conf.d/50-pulseaudio.conf
├── 60-a52-encoder.conf -> /usr/share/alsa/alsa.conf.d/60-a52-encoder.conf
├── 60-upmix.conf -> /usr/share/alsa/alsa.conf.d/60-upmix.conf
├── 60-vdownmix.conf -> /usr/share/alsa/alsa.conf.d/60-vdownmix.conf
├── 98-usb-stream.conf -> /usr/share/alsa/alsa.conf.d/98-usb-stream.conf
├── 99-pulseaudio-default.conf.example
└── 99-pulse.conf -> /usr/share/alsa/alsa.conf.d/pulse.conf
1 directory, 13 files
Prostě nejsou zkompilované všechny potřebné moduly na zvukovku. Pravděpodobně to bude zalogované i v dmesg.
make menuconfig.
lsmod nic nevypise. Je nutne aby boli modulmi? Nestaci aby boli skompilovane priamo do jadra?
<code>dmesg
[ 0.000000] Linux version 5.4.60-gentoo (root@localhost) (gcc version 9.3.0 (Gentoo 9.3.0-r1 p3)) #4 SMP Wed Sep 23 16:41:05 -00 2020
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.60-gentoo root=/dev/sda3 ro
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd4a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd4a1000-0x00000000bd4a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd4a7000-0x00000000bd5b6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd5b7000-0x00000000bd60efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd60f000-0x00000000bd6c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd6c6000-0x00000000bd6d0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd6d1000-0x00000000bd6d3fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd6d4000-0x00000000bd6d7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd6d8000-0x00000000bd6dbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd6dc000-0x00000000bd6defff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd6df000-0x00000000bd705fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd706000-0x00000000bd707fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd708000-0x00000000bd90efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd90f000-0x00000000bd99efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd99f000-0x00000000bd9fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bd9ff000-0x00000000bd9fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bdc00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 74553XG/74553XG, BIOS 6DET72WW (3.22 ) 10/25/2012
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.192 MHz processor
[ 0.005536] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005538] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005547] last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.005551] MTRR default type: uncachable
[ 0.005552] MTRR fixed ranges enabled:
[ 0.005553] 00000-9FFFF write-back
[ 0.005554] A0000-BFFFF uncachable
[ 0.005555] C0000-FFFFF write-protect
[ 0.005555] MTRR variable ranges enabled:
[ 0.005557] 0 base 1BC000000 mask FFC000000 uncachable
[ 0.005558] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.005559] 2 base 000000000 mask F80000000 write-back
[ 0.005560] 3 base 080000000 mask FC0000000 write-back
[ 0.005561] 4 base 100000000 mask F80000000 write-back
[ 0.005562] 5 base 180000000 mask FC0000000 write-back
[ 0.005564] 6 base 0BDE00000 mask FFFE00000 uncachable
[ 0.006687] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.006955] e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
[ 0.006960] last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[ 0.013003] found SMP MP-table at [mem 0x000f72d0-0x000f72df]
[ 0.013067] check: Scanning 1 areas for low memory corruption
[ 0.013767] ACPI: Early table checksum verification disabled
[ 0.013773] ACPI: RSDP 0x00000000000F7290 000024 (v02 LENOVO)
[ 0.013777] ACPI: XSDT 0x00000000BD95B712 000094 (v01 LENOVO TP-6D 00003220 LTP 00000000)
[ 0.013783] ACPI: FACP 0x00000000BD95B800 0000F4 (v03 LENOVO TP-6D 00003220 LNVO 00000001)
[ 0.013788] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20190816/tbfadt-564)
[ 0.013791] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20190816/tbfadt-669)
[ 0.013795] ACPI: DSDT 0x00000000BD95BBF4 00DF43 (v01 LENOVO TP-6D 00003220 MSFT 03000000)
[ 0.013799] ACPI: FACS 0x00000000BD98E000 000040
[ 0.013802] ACPI: FACS 0x00000000BD98E000 000040
[ 0.013804] ACPI: SSDT 0x00000000BD95B9B4 000240 (v01 LENOVO TP-6D 00003220 MSFT 03000000)
[ 0.013808] ACPI: ECDT 0x00000000BD969B37 000052 (v01 LENOVO TP-6D 00003220 LNVO 00000001)
[ 0.013811] ACPI: APIC 0x00000000BD969B89 000078 (v01 LENOVO TP-6D 00003220 LNVO 00000001)
[ 0.013815] ACPI: MCFG 0x00000000BD969C01 00003C (v01 LENOVO TP-6D 00003220 LNVO 00000001)
[ 0.013818] ACPI: HPET 0x00000000BD969C3D 000038 (v01 LENOVO TP-6D 00003220 LNVO 00000001)
[ 0.013822] ACPI: SLIC 0x00000000BD969DC2 000176 (v01 LENOVO TP-6D 00003220 LTP 00000000)
[ 0.013825] ACPI: BOOT 0x00000000BD969F38 000028 (v01 LENOVO TP-6D 00003220 LTP 00000001)
[ 0.013829] ACPI: ASF! 0x00000000BD969F60 0000A0 (v16 LENOVO TP-6D 00003220 PTL 00000001)
[ 0.013832] ACPI: SSDT 0x00000000BD98D1EA 000578 (v01 LENOVO TP-6D 00003220 INTL 20050513)
[ 0.013836] ACPI: DMAR 0x00000000BD706000 000120 (v01 ? 00000001 00000000)
[ 0.013839] ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.013843] ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.013847] ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.013856] ACPI: Local APIC address 0xfee00000
[ 0.013896] No NUMA configuration found
[ 0.013898] Faking a node at [mem 0x0000000000000000-0x00000001bbffffff]
[ 0.013902] NODE_DATA(0) allocated [mem 0x1bbff9000-0x1bbffcfff]
[ 0.013932] Zone ranges:
[ 0.013933] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013935] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.013936] Normal [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.013938] Movable zone start for each node
[ 0.013939] Early memory node ranges
[ 0.013940] node 0: [mem 0x0000000000001000-0x0000000000099fff]
[ 0.013942] node 0: [mem 0x0000000000100000-0x00000000bd4a0fff]
[ 0.013943] node 0: [mem 0x00000000bd4a7000-0x00000000bd5b6fff]
[ 0.013944] node 0: [mem 0x00000000bd60f000-0x00000000bd6c5fff]
[ 0.013946] node 0: [mem 0x00000000bd9ff000-0x00000000bd9fffff]
[ 0.013947] node 0: [mem 0x0000000100000000-0x00000001bbffffff]
[ 0.014372] Zeroed struct page in unavailable ranges: 27134 pages
[ 0.014374] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bbffffff]
[ 0.014376] On node 0 totalpages: 1545730
[ 0.014377] DMA zone: 64 pages used for memmap
[ 0.014378] DMA zone: 21 pages reserved
[ 0.014378] DMA zone: 3993 pages, LIFO batch:0
[ 0.014453] DMA32 zone: 12058 pages used for memmap
[ 0.014454] DMA32 zone: 771689 pages, LIFO batch:63
[ 0.038541] Normal zone: 12032 pages used for memmap
[ 0.038543] Normal zone: 770048 pages, LIFO batch:63
[ 0.061077] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[ 0.061352] ACPI: PM-Timer IO Port: 0x1008
[ 0.061354] ACPI: Local APIC address 0xfee00000
[ 0.061362] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.061363] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.061377] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.061379] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.061382] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.061384] ACPI: IRQ0 used by override.
[ 0.061385] ACPI: IRQ9 used by override.
[ 0.061387] Using ACPI (MADT) for SMP configuration information
[ 0.061389] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.061395] smpboot: 4 Processors exceeds NR_CPUS limit of 2
[ 0.061397] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.061432] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.061438] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.227051] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.228291] percpu: Embedded 50 pages/cpu s166936 r8192 d29672 u1048576
[ 0.228300] pcpu-alloc: s166936 r8192 d29672 u1048576 alloc=1*2097152
[ 0.228301] pcpu-alloc: [0] 0 1
[ 0.228329] Built 1 zonelists, mobility grouping on. Total pages: 1521555
[ 0.228330] Policy zone: Normal
[ 0.228334] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.60-gentoo root=/dev/sda3 ro
[ 0.232583] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.234706] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.234751] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.318369] Memory: 5977120K/6182920K available (14340K kernel code, 1205K rwdata, 3332K rodata, 1264K init, 1380K bss, 205800K reserved, 0K cma-reserved)
[ 0.318448] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.318464] Kernel/User page tables isolation: enabled
[ 0.318620] rcu: Hierarchical RCU implementation.
[ 0.318621] rcu: RCU event tracing is enabled.
[ 0.318623] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.318938] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.319180] random: get_random_bytes called from start_kernel+0x30e/0x4c9 with crng_init=0
[ 0.320803] Console: colour VGA+ 80x25
[ 0.329882] printk: console [tty0] enabled
[ 0.329970] ACPI: Core revision 20190816
[ 0.330171] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.330290] APIC: Switch to symmetric I/O mode setup
[ 0.330772] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.335290] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2282c8b4868, max_idle_ns: 440795221228 ns
[ 0.335404] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.38 BogoMIPS (lpj=2394192)
[ 0.335513] pid_max: default: 32768 minimum: 301
[ 0.335604] LSM: Security Framework initializing
[ 0.335687] SELinux: Initializing.
[ 0.335843] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.336004] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.336467] Disabled fast string operations
[ 0.336559] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.336636] process: using mwait in idle threads
[ 0.336712] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.336786] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.336863] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.336969] Spectre V2 : Mitigation: Full generic retpoline
[ 0.337044] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.337147] Speculative Store Bypass: Vulnerable
[ 0.337223] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.337448] Freeing SMP alternatives memory: 36K
[ 0.440766] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.441020] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.441131] ... version: 2
[ 0.441203] ... bit width: 40
[ 0.441274] ... generic registers: 2
[ 0.441346] ... value mask: 000000ffffffffff
[ 0.441400] ... max period: 000000007fffffff
[ 0.441400] ... fixed-purpose events: 3
[ 0.441400] ... event mask: 0000000700000003
[ 0.441400] rcu: Hierarchical SRCU implementation.
[ 0.441497] smp: Bringing up secondary CPUs ...
[ 0.441690] x86: Booting SMP configuration:
[ 0.441763] .... node #0, CPUs: #1
[ 0.012262] Disabled fast string operations
[ 0.443417] smp: Brought up 1 node, 2 CPUs
[ 0.444171] smpboot: Max logical packages: 2
[ 0.444244] smpboot: Total of 2 processors activated (9576.76 BogoMIPS)
[ 0.445428] devtmpfs: initialized
[ 0.445671] PM: Registering ACPI NVS region [mem 0xbd6c6000-0xbd6d0fff] (45056 bytes)
[ 0.445671] PM: Registering ACPI NVS region [mem 0xbd6d8000-0xbd6dbfff] (16384 bytes)
[ 0.445671] PM: Registering ACPI NVS region [mem 0xbd6df000-0xbd705fff] (159744 bytes)
[ 0.445750] PM: Registering ACPI NVS region [mem 0xbd90f000-0xbd99efff] (589824 bytes)
[ 0.445914] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.446024] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.446542] NET: Registered protocol family 16
[ 0.446727] audit: initializing netlink subsys (disabled)
[ 0.446810] audit: type=2000 audit(1603146637.116:1): state=initialized audit_enabled=0 res=1
[ 0.446810] cpuidle: using governor menu
[ 0.446810] Simple Boot Flag at 0x35 set to 0x1
[ 0.446810] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.446810] ACPI: bus type PCI registered
[ 0.447433] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.447541] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.447626] PCI: Using configuration type 1 for base access
[ 0.450645] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.450645] cryptomgr_test (26) used greatest stack depth: 15520 bytes left
[ 0.451426] cryptd: max_cpu_qlen set to 1000
[ 0.451502] cryptomgr_test (55) used greatest stack depth: 15432 bytes left
[ 0.451515] ACPI: Added _OSI(Module Device)
[ 0.451588] ACPI: Added _OSI(Processor Device)
[ 0.451661] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.451734] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.451808] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.451880] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.451880] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.459264] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.459914] ACPI: EC: EC started
[ 0.459986] ACPI: EC: interrupt blocked
[ 0.460789] ACPI: \: Used as first EC
[ 0.460862] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.460936] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.461279] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.471402] ACPI: Dynamic OEM Table Load:
[ 0.471481] ACPI: SSDT 0xFFFF9BC8B49FA400 0002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.472246] ACPI: Dynamic OEM Table Load:
[ 0.472324] ACPI: SSDT 0xFFFF9BC8B49F1000 00087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.473349] ACPI: Dynamic OEM Table Load:
[ 0.474407] ACPI: SSDT 0xFFFF9BC8B4A6CE00 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.475072] ACPI: Dynamic OEM Table Load:
[ 0.475148] ACPI: SSDT 0xFFFF9BC8B49B5E40 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.476400] ACPI: Interpreter enabled
[ 0.476400] ACPI: (supports S0 S3 S5)
[ 0.476400] ACPI: Using IOAPIC for interrupt routing
[ 0.476400] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.477467] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.486587] ACPI: Power Resource [PUBS] (on)
[ 0.486809] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.487920] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.497211] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[ 0.497676] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.497843] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498007] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498172] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498337] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498490] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498818] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.498989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.499068] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.499405] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.499700] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.499777] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.499890] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.500043] PCI host bridge to bus 0000:00
[ 0.500117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.500193] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.500270] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.500373] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.501403] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.501506] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.501610] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.501694] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.501791] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.501894] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.502050] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.502136] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.502217] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.502217] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.502217] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.502217] pci 0000:00:02.1: reg 0x10: [mem 0xf2400000-0xf24fffff 64bit]
[ 0.502217] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000
[ 0.502217] pci 0000:00:03.0: reg 0x10: [mem 0xf2926800-0xf292680f 64bit]
[ 0.502217] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.502249] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.502349] pci 0000:00:19.0: reg 0x10: [mem 0xf2700000-0xf271ffff]
[ 0.502412] pci 0000:00:19.0: reg 0x14: [mem 0xf2925000-0xf2925fff]
[ 0.502496] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
[ 0.502652] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.502837] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.502968] pci 0000:00:1a.0: reg 0x20: [io 0x1860-0x187f]
[ 0.503186] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.503318] pci 0000:00:1a.1: reg 0x20: [io 0x1880-0x189f]
[ 0.503539] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.503672] pci 0000:00:1a.2: reg 0x20: [io 0x18a0-0x18bf]
[ 0.503896] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.503996] pci 0000:00:1a.7: reg 0x10: [mem 0xf2926c00-0xf2926fff]
[ 0.504170] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.504355] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.505431] pci 0000:00:1b.0: reg 0x10: [mem 0xf2920000-0xf2923fff 64bit]
[ 0.505612] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.505794] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.505990] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.506184] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.506184] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.506184] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.506184] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.506184] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.506184] pci 0000:00:1d.0: reg 0x20: [io 0x18c0-0x18df]
[ 0.506362] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.507459] pci 0000:00:1d.1: reg 0x20: [io 0x18e0-0x18ff]
[ 0.507673] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.507805] pci 0000:00:1d.2: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.508028] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.508128] pci 0000:00:1d.7: reg 0x10: [mem 0xf2927000-0xf29273ff]
[ 0.508302] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.508302] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.508302] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.508302] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.508302] pci 0000:00:1f.2: reg 0x10: [io 0x1c48-0x1c4f]
[ 0.508302] pci 0000:00:1f.2: reg 0x14: [io 0x183c-0x183f]
[ 0.508317] pci 0000:00:1f.2: reg 0x18: [io 0x1c40-0x1c47]
[ 0.508411] pci 0000:00:1f.2: reg 0x1c: [io 0x1838-0x183b]
[ 0.508495] pci 0000:00:1f.2: reg 0x20: [io 0x1c20-0x1c3f]
[ 0.508578] pci 0000:00:1f.2: reg 0x24: [mem 0xf2926000-0xf29267ff]
[ 0.508714] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.508892] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.508992] pci 0000:00:1f.3: reg 0x10: [mem 0xf2927400-0xf29274ff 64bit]
[ 0.509095] pci 0000:00:1f.3: reg 0x20: [io 0x1c60-0x1c7f]
[ 0.509338] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.509490] pci 0000:03:00.0: [8086:4236] type 00 class 0x028000
[ 0.509624] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[ 0.509910] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.510120] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.510199] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.510353] pci 0000:04:00.0: [8086:444e] type 00 class 0x058000
[ 0.511445] pci 0000:04:00.0: reg 0x10: [mem 0xf2600000-0xf26003ff]
[ 0.511554] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x20ff]
[ 0.511695] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.511977] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.512054] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.512132] pci 0000:00:1c.2: bridge window [mem 0xf2600000-0xf26fffff]
[ 0.512237] pci_bus 0000:0d: extended config space not accessible
[ 0.512237] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
[ 0.512237] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.512237] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.512237] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.512237] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.512237] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.513402] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.516404] ACPI: EC: interrupt unblocked
[ 0.516404] ACPI: EC: event unblocked
[ 0.516404] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.516404] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events
[ 0.516404] iommu: Default domain type: Translated
[ 0.516423] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.516484] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.517408] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.517482] vgaarb: loaded
[ 0.517645] SCSI subsystem initialized
[ 0.517727] libata version 3.00 loaded.
[ 0.517727] ACPI: bus type USB registered
[ 0.517727] usbcore: registered new interface driver usbfs
[ 0.517727] usbcore: registered new interface driver hub
[ 0.517727] usbcore: registered new device driver usb
[ 0.517792] pps_core: LinuxPPS API ver. 1 registered
[ 0.517866] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo GiomeXtti < linux.it>
[ 0.518405] PTP clock support registered
[ 0.518488] EDAC MC: Ver: 3.0.0
[ 0.518718] Advanced Linux Sound Architecture Driver Initialized.
[ 0.518806] PCI: Using ACPI for IRQ routing
[ 0.521237] PCI: pci_cache_line_size set to 64 bytes
[ 0.521307] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[ 0.521308] e820: reserve RAM buffer [mem 0xbd4a1000-0xbfffffff]
[ 0.521310] e820: reserve RAM buffer [mem 0xbd5b7000-0xbfffffff]
[ 0.521311] e820: reserve RAM buffer [mem 0xbd6c6000-0xbfffffff]
[ 0.521313] e820: reserve RAM buffer [mem 0xbda00000-0xbfffffff]
[ 0.521438] NetLabel: Initializing
[ 0.521510] NetLabel: domain hash size = 128
[ 0.521582] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.521670] NetLabel: unlabeled traffic allowed by default
[ 0.521763] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.521763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.521763] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.523420] clocksource: Switched to clocksource tsc-early
[ 0.536484] VFS: Disk quotas dquot_6.6.0
[ 0.536587] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.536736] pnp: PnP ACPI init
[ 0.557379] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.557457] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.557533] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.557610] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.557686] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.557765] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.557842] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.557919] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.557995] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.558072] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.558149] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.558225] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.558302] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.558379] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.558460] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.578540] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.578616] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.578693] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.578770] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.578846] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.578921] system 00:01: [io 0x1680-0x169f] has been reserved
[ 0.578997] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.579073] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.579149] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.579226] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.579302] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.579378] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.579454] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.579534] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.579602] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.579627] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.579655] pnp 00:04: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.600159] pnp: PnP ACPI: found 5 devices
[ 0.601844] thermal_sys: Registered thermal governor 'step_wise'
[ 0.601845] thermal_sys: Registered thermal governor 'user_space'
[ 0.606461] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.606648] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.606756] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.606865] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.606974] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.607079] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.607188] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.607305] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
[ 0.607385] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.607492] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.607599] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.607704] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.607783] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.607860] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.607936] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.608015] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.608094] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.608203] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.608278] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.608357] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
[ 0.608436] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.608546] pci 0000:04:00.0: BAR 6: assigned [mem 0xf2610000-0xf261ffff pref]
[ 0.608649] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.608727] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.608806] pci 0000:00:1c.2: bridge window [mem 0xf2600000-0xf26fffff]
[ 0.608885] pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.608994] pci 0000:00:1e.0: PCI bridge to [bus 0d]
[ 0.609079] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.609155] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.609230] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.609307] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.609383] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.609459] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.609536] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.609610] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.609686] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.609791] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.609866] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[ 0.609941] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.610044] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.610118] pci_bus 0000:04: resource 1 [mem 0xf2600000-0xf26fffff]
[ 0.610194] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.610297] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7 window]
[ 0.610372] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff window]
[ 0.610448] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.610524] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.610600] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.610677] pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff window]
[ 0.610839] NET: Registered protocol family 2
[ 0.611062] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.611197] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.611488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.611930] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.612072] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.612194] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.612384] NET: Registered protocol family 1
[ 0.612610] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.613780] PCI: CLS 64 bytes, default 64
[ 0.613908] DMAR: Host address width 36
[ 0.613981] DMAR: DRHD base: 0x000000feb03000 flags: 0x0
[ 0.614062] DMAR: dmar0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.614166] DMAR: DRHD base: 0x000000feb01000 flags: 0x0
[ 0.614243] DMAR: dmar1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.614347] DMAR: DRHD base: 0x000000feb00000 flags: 0x0
[ 0.614424] DMAR: dmar2: reg_base_addr feb00000 ver 1:0 cap c0000020630270 ecap 1000
[ 0.614528] DMAR: DRHD base: 0x000000feb02000 flags: 0x1
[ 0.614605] DMAR: dmar3: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.614708] DMAR: RMRR base: 0x000000f2926c00 end: 0x000000f29273ff
[ 0.614786] DMAR: RMRR base: 0x000000bdc00000 end: 0x000000bfffffff
[ 0.614879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.614955] software IO TLB: mapped [mem 0xb94a1000-0xbd4a1000] (64MB)
[ 0.615275] check: Scanning for low memory corruption every 60 seconds
[ 0.616087] Initialise system trusted keyrings
[ 0.616196] workingset: timestamp_bits=56 max_order=21 bucket_order=0
[ 0.618672] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.623165] Key type asymmetric registered
[ 0.623168] cryptomgr_test (76) used greatest stack depth: 15248 bytes left
[ 0.623238] Asymmetric key parser 'x509' registered
[ 0.623393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.623497] io scheduler mq-deadline registered
[ 0.623570] io scheduler kyber registered
[ 0.623894] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 0.624179] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 0.624451] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 0.625026] ACPI: AC Adapter [AC] (on-line)
[ 0.625707] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.625853] ACPI: Lid Switch [LID]
[ 0.625963] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.626098] ACPI: Sleep Button [SLPB]
[ 0.626220] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.626352] ACPI: Power Button [PWRF]
[ 0.627126] Monitor-Mwait will be used to enter C-1 state
[ 0.627133] Monitor-Mwait will be used to enter C-2 state
[ 0.627137] Monitor-Mwait will be used to enter C-3 state
[ 0.627141] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.627268] clocksource: Switched to clocksource hpet
[ 0.631707] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.631785] ACPI: Thermal Zone [THM0] (67 C)
[ 0.633347] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.633443] ACPI: Thermal Zone [THM1] (65 C)
[ 0.633596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.636575] Non-volatile memory driver v1.3
[ 0.636983] Linux agpgart interface v0.103
[ 0.639550] pci 0000:00:00.0: Intel GM45 Chipset
[ 0.639638] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.640737] pci 0000:00:00.0: detected 32768K stolen memory
[ 0.642746] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.645849] random: fast init done
[ 0.645991] Console: switching to colour dummy device 80x25
[ 0.646845] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.646946] [drm] Driver supports precise vblank timestamp query.
[ 0.652188] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.655620] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.716730] [drm] RC6 disabled, disabling runtime PM support
[ 0.717284] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 0.717622] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 0.722332] acpi device:01: registered as cooling_device2
[ 0.722424] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.725077] loop: module loaded
[ 0.725478] null_blk: module loaded
[ 0.725572] ahci 0000:00:1f.2: version 3.0
[ 0.725763] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.725791] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.725796] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 0.726309] scsi host0: ahci
[ 0.726536] scsi host1: ahci
[ 0.726708] scsi host2: ahci
[ 0.726852] scsi host3: ahci
[ 0.726922] ata1: SATA max UDMA/133 abar m2048@0xf2926000 port 0xf2926100 irq 27
[ 0.726927] ata2: SATA max UDMA/133 abar m2048@0xf2926000 port 0xf2926180 irq 27
[ 0.726931] ata3: DUMMY
[ 0.726932] ata4: DUMMY
[ 0.727059] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 0.727063] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <>. All Rights Reserved.
[ 0.727086] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.727088] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.727109] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.727112] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.727129] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.727132] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.727256] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.881720] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:19:b6:a7
[ 0.881726] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.881755] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 0.881795] Intel(R) Wireless WiFi driver for Linux
[ 0.881798] Copyright(c) 2003- 2015 Intel Corporation
[ 0.881948] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.882128] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-5000-5.ucode failed with error -2
[ 0.882143] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-5000-4.ucode failed with error -2
[ 0.882158] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-5000-3.ucode failed with error -2
[ 0.882172] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-5000-2.ucode failed with error -2
[ 0.882185] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-5000-1.ucode failed with error -2
[ 0.882190] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 0.882193] iwlwifi 0000:03:00.0: minimum version required: iwlwifi-5000-1
[ 0.882196] iwlwifi 0000:03:00.0: maximum version supported: iwlwifi-5000-5
[ 0.882199] iwlwifi 0000:03:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[ 0.882335] usbcore: registered new interface driver rtl8187
[ 0.882347] usbcore: registered new interface driver rtl8xxxu
[ 0.882421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.882425] ehci-pci: EHCI PCI platform driver
[ 0.882529] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.882573] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.882591] ehci-pci 0000:00:1a.7: debug port 1
[ 0.886506] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.886532] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2926c00
[ 0.893415] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.893455] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.893459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.893464] usb usb1: Product: EHCI Host Controller
[ 0.893467] usb usb1: Manufacturer: Linux 5.4.60-gentoo ehci_hcd
[ 0.893470] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.893590] hub 1-0:1.0: USB hub found
[ 0.893599] hub 1-0:1.0: 6 ports detected
[ 0.893957] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.894005] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.894022] ehci-pci 0000:00:1d.7: debug port 1
[ 0.897920] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.897933] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2927000
[ 0.904415] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.904447] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.904451] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.904455] usb usb2: Product: EHCI Host Controller
[ 0.904458] usb usb2: Manufacturer: Linux 5.4.60-gentoo ehci_hcd
[ 0.904461] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.904566] hub 2-0:1.0: USB hub found
[ 0.904574] hub 2-0:1.0: 6 ports detected
[ 0.904846] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.904852] ohci-pci: OHCI PCI platform driver
[ 0.904866] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.904938] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.904979] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.905018] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 0.905070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.905074] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905078] usb usb3: Product: UHCI Host Controller
[ 0.905081] usb usb3: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.905084] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.905179] hub 3-0:1.0: USB hub found
[ 0.905189] hub 3-0:1.0: 2 ports detected
[ 0.905398] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.905448] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.905490] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 0.905540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.905545] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.905549] usb usb4: Product: UHCI Host Controller
[ 0.905552] usb usb4: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.905555] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.905653] hub 4-0:1.0: USB hub found
[ 0.905661] hub 4-0:1.0: 2 ports detected
[ 0.905871] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.905914] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.905953] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 0.906005] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.906010] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906014] usb usb5: Product: UHCI Host Controller
[ 0.906017] usb usb5: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.906020] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.906129] hub 5-0:1.0: USB hub found
[ 0.906137] hub 5-0:1.0: 2 ports detected
[ 0.906348] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.906393] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.906433] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 0.906481] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.906486] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906490] usb usb6: Product: UHCI Host Controller
[ 0.906493] usb usb6: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.906496] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.906597] hub 6-0:1.0: USB hub found
[ 0.906604] hub 6-0:1.0: 2 ports detected
[ 0.906832] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.906872] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.906914] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 0.906964] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.906969] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906972] usb usb7: Product: UHCI Host Controller
[ 0.906975] usb usb7: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.906978] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.907079] hub 7-0:1.0: USB hub found
[ 0.907087] hub 7-0:1.0: 2 ports detected
[ 0.907312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.907356] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.907400] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 0.907457] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 0.907461] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.907465] usb usb8: Product: UHCI Host Controller
[ 0.907468] usb usb8: Manufacturer: Linux 5.4.60-gentoo uhci_hcd
[ 0.907471] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.907573] hub 8-0:1.0: USB hub found
[ 0.907581] hub 8-0:1.0: 2 ports detected
[ 0.907776] usbcore: registered new interface driver usb-storage
[ 0.907808] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.919500] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.919507] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.919901] rtc_cmos 00:02: RTC can wake from S4
[ 0.920134] rtc_cmos 00:02: registered as rtc0
[ 0.920156] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.920267] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.941013] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.941021] intel_pstate: CPU model not supported
[ 0.941051] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.941081] usbcore: registered new interface driver usbhid
[ 0.941084] usbhid: USB HID core driver
[ 0.961196] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 0.961199] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 0.961201] thinkpad_acpi: ThinkPad BIOS 6DET72WW (3.22 ), EC 7XHT24WW-1.06
[ 0.961204] thinkpad_acpi: Lenovo ThinkPad X200, model 74553XG
[ 0.982376] thinkpad_acpi: radio switch found; radios are enabled
[ 0.982395] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 0.982399] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 0.984494] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 0.988138] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 0.990203] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 0.990206] battery: new extension: ThinkPad Battery Extension
[ 0.990254] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 0.990309] hdaps: supported laptop not found!
[ 0.990312] hdaps: driver init failed (ret=-19)!
[ 0.991011] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.991675] Initializing XFRM netlink socket
[ 0.991856] NET: Registered protocol family 10
[ 0.992091] Segment Routing with IPv6
[ 0.992169] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.992318] NET: Registered protocol family 17
[ 0.992493] microcode: sig=0x1067a, pf=0x80, revision=0xa0c
[ 0.992509] microcode: Microcode Update Driver: v2.2.
[ 0.992514] IPI shorthand broadcast: enabled
[ 0.992586] registered taskstats version 1
[ 0.992589] Loading compiled-in X.509 certificates
[ 0.992606] Key type ._fscrypt registered
[ 0.992609] Key type .fscrypt registered
[ 0.993012] printk: console [netcon0] enabled
[ 0.993015] netconsole: network logging started
[ 0.995703] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.997034] hdaudio hdaudioC0D0: Unable to bind the codec
[ 0.997288] kworker/u4:6 (102) used greatest stack depth: 14616 bytes left
[ 0.997770] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.997777] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.997825] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.997826] ALSA device list:
[ 0.997827] No soundcards found.
[ 0.997831] cfg80211: failed to load regulatory.db
[ 1.043058] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.043550] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.043552] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.043558] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.043963] ata1.00: ATA-9: SanDisk SDSSDP128G, 3.2.0, max UDMA/133
[ 1.043967] ata1.00: 246162672 sectors, multi 1: LBA48 NCQ (depth 32)
[ 1.044773] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.044775] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.044780] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.044999] ata1.00: configured for UDMA/133
[ 1.193149] fbcon: i915drmfb (fb0) is primary device
[ 1.411443] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[ 1.536435] usb 5-2: device descriptor read/64, error -71
[ 1.766443] usb 5-2: device descriptor read/64, error -71
[ 1.782248] Console: switching to colour frame buffer device 160x50
[ 1.799058] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.799217] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP12 0 PQ: 0 ANSI: 5
[ 1.799564] sd 0:0:0:0: [sda] 246162672 512-byte logical blocks: (126 GB/117 GiB)
[ 1.799610] sd 0:0:0:0: [sda] Write Protect is off
[ 1.799640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.799659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.800363] sda: sda1 sda2 sda3
[ 1.800885] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.818434] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.837345] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 1.988415] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[ 2.111599] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.118687] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.118741] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.120493] devtmpfs: mounted
[ 2.120971] Freeing unused kernel image memory: 1264K
[ 2.121028] Write protecting the kernel read-only data: 20480k
[ 2.121995] Freeing unused kernel image memory: 2008K
[ 2.122477] Freeing unused kernel image memory: 764K
[ 2.122537] Run /sbin/init as init process
[ 2.211140] kbd_mode (112) used greatest stack depth: 14152 bytes left
[ 2.229674] loadkeys (113) used greatest stack depth: 12976 bytes left
[ 2.318429] usb 5-2: device descriptor read/64, error -71
[ 2.550419] usb 5-2: device descriptor read/64, error -71
[ 2.605110] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.615839] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.657445] usb usb5-port2: attempt power cycle
[ 3.084430] usb 5-2: new full-speed USB device number 4 using uhci_hcd
[ 3.270083] udevd[574]: starting version 3.2.9
[ 3.274812] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.300537] udevd[574]: starting eudev-3.2.9
[ 3.392207] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 3.428400] udevd[608]: Unknown key identifier 'zoom'
[ 3.505446] usb 5-2: device not accepting address 4, error -71
[ 3.619463] usb 5-2: new full-speed USB device number 5 using uhci_hcd
[ 4.033430] usb 5-2: device not accepting address 5, error -71
[ 4.033459] usb usb5-port2: unable to enumerate USB device
[ 4.195784] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 4.346736] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.346746] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 4.598037] elogind-daemon[1096]: New seat seat0.
[ 4.599215] elogind-daemon[1096]: Watching system buttons on /dev/input/event2 (Power Button)
[ 4.608096] elogind-daemon[1096]: Watching system buttons on /dev/input/event0 (Lid Switch)
[ 4.608202] elogind-daemon[1096]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 4.608302] elogind-daemon[1096]: Watching system buttons on /dev/input/event5 (AT Translated Set 2 keyboard)
[ 4.608460] elogind-daemon[1096]: Watching system buttons on /dev/input/event4 (ThinkPad Extra Buttons)
[ 4.811619] ip (1232) used greatest stack depth: 12456 bytes left
[ 17.204733] random: crng init done
[ 17.204736] random: 7 urandom warning(s) missed due to ratelimiting
[ 22.185050] elogind-daemon[1096]: New session 1 of user root.
[ 45.224386] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 45.224520] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 6003.203523] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 6003.318514] usb 1-6: device descriptor read/64, error -32
[ 6003.739521] usb 5-2: new full-speed USB device number 6 using uhci_hcd
[ 6003.864523] usb 5-2: device descriptor read/64, error -71
[ 6004.369340] elogind-daemon[1096]: Lid closed.
[ 6004.375167] elogind-daemon[1096]: Suspending...
[ 6004.377026] elogind-daemon[1096]: Suspending system...
[ 6004.377043] PM: suspend entry (deep)
[ 6004.393531] Filesystems sync: 0.016 seconds
[ 6004.393823] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6004.395504] OOM killer disabled.
[ 6004.395506] Freezing remaining freezable tasks ...
[ 6004.797519] usb 1-6: device descriptor read/64, error -71
[ 6005.901506] (elapsed 1.505 seconds) done.
[ 6005.901533] printk: Suspending console(s) (use no_console_suspend to debug)
[ 6005.907624] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6005.907758] sd 0:0:0:0: [sda] Stopping disk
[ 6005.919562] e1000e: EEE TX LPI TIMER: 00000000
[ 6006.228201] ACPI: EC: interrupt blocked
[ 6006.241584] ACPI: Preparing to enter system sleep state S3
[ 6006.257195] ACPI: EC: event blocked
[ 6006.257197] ACPI: EC: EC stopped
[ 6006.257198] PM: Saving platform NVS memory
[ 6006.257208] Disabling non-boot CPUs ...
[ 6006.258965] smpboot: CPU 1 is now offline
[ 6006.259669] ACPI: Low-level resume complete
[ 6006.259669] ACPI: EC: EC started
[ 6006.259669] PM: Restoring platform NVS memory
[ 6006.259669] Enabling non-boot CPUs ...
[ 6006.259669] x86: Booting SMP configuration:
[ 6006.259669] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6006.258854] Disabled fast string operations
[ 6006.293442] CPU1 is up
[ 6006.295323] ACPI: Waking up from system sleep state S3
[ 6006.320552] ACPI: EC: interrupt unblocked
[ 6006.336976] usb usb3: root hub lost power or was reset
[ 6006.337016] usb usb4: root hub lost power or was reset
[ 6006.337075] usb usb5: root hub lost power or was reset
[ 6006.337195] usb usb6: root hub lost power or was reset
[ 6006.337235] usb usb7: root hub lost power or was reset
[ 6006.337274] usb usb8: root hub lost power or was reset
[ 6006.338052] ACPI: EC: event unblocked
[ 6006.339214] sd 0:0:0:0: [sda] Starting disk
[ 6006.646605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6006.646627] ata2: SATA link down (SStatus 0 SControl 300)
[ 6006.648997] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6006.648999] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6006.649000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6006.650101] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6006.650103] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6006.650105] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6006.650324] ata1.00: configured for UDMA/133
[ 6006.651359] OOM killer enabled.
[ 6006.651360] Restarting tasks ... done.
[ 6006.682366] video LNXVIDEO:00: Restoring backlight state
[ 6006.683539] PM: suspend exit
[ 6006.683563] elogind-daemon[1096]: System resumed.
[ 6006.684191] elogind-daemon[1096]: Lid opened.
[ 6006.956415] usb 5-2: new full-speed USB device number 7 using uhci_hcd
[ 6007.082411] usb 5-2: device descriptor read/64, error -71
[ 6007.961659] usb usb1-port6: Cannot enable. Maybe the USB cable is bad?
[ 6008.807396] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6008.858533] usb usb1-port6: Cannot enable. Maybe the USB cable is bad?
[ 6008.858550] usb usb1-port6: attempt power cycle
[ 6009.476858] usb 5-2: new full-speed USB device number 8 using uhci_hcd
[ 6009.805495] usb 5-2: device descriptor read/64, error -71
[ 6010.689789] usb usb1-port6: Cannot enable. Maybe the USB cable is bad?
[ 6011.586533] usb usb1-port6: Cannot enable. Maybe the USB cable is bad?
[ 6011.586552] usb usb1-port6: unable to enumerate USB device
[ 6014.936634] e1000e: enp0s25 NIC Link is Down
[ 6017.814395] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
</code>
[ 0.997034] hdaudio hdaudioC0D0: Unable to bind the codec
V kernelu v Device Drivers > Sound card support > Advanced Linux Sound Architecture > HD-Audio zapni vsechny "Build * HD-audio codec support", udelej novy kernel a přebootuj do něho.
20.10.2020 18:07
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
dmesg | grep hda
[ +0.000869] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff8242fbe0) [ +0.002736] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ +0.000005] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0.000004] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0) [ +0.000003] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ +0.000002] snd_hda_codec_generic hdaudioC0D0: inputs: [ +0.000005] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x23 [ +0.000004] snd_hda_codec_generic hdaudioC0D0: Mic=0x1b [ +0.004662] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins [ +0.000009] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ +0.000004] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0.000004] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0.000003] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 [ +0.000003] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6 [ +0.000003] snd_hda_codec_generic hdaudioC0D3: inputs:~/.asoundrc ale netuším, jestli to je vůbec potřeba
ipc_gid audio
slave {
channels 2 # make 6 or 5.1 channel
pcm {
format S16_LE # S32_LE
rate 48000 # can also be 44100
type hw
card 1 # your card
device 7 # your device
subdevice 0 #important?
}
period_size 1024
buffer_size 8192
}
bindings {
0 0
1 1
# Uncomment below if using 6 channel
# 2 2
# 3 3
# 4 4
# 5 5
}
}
capture.pcm "hw:0"
}
pcm.!default {
type plug
slave.pcm "dmixed"
}
pcm.!default {
type plug
slave.pcm "dmixed"
}
jako je mi divný, že se to snd-hda u tebe vůbec v dmesg nevyskytuje. nemáš to jako modul? to by se musel zavést, ručně sudo insmod snd_hda_intel
nebo automaticky buď dát do /etc/modules-load.d, nebo nekompilovat jako modul, ale do jádra a hotovo
20.10.2020 20:43
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
lsmod nic nevypisoval, ziadne moduly, a ked som skusil tie spravne natiahnut cez modprobe.. tak mi napisal ze tam niesu a v chybovej hlaske uviedol aj cestu na verziu kernelu.. vtedy som si uvedomil, ze nemam nabootovane jadro, ktore tak divoko konfigurujem :D
Za ten mesiac co mam Gentoo som nikdy nezadal grub-mkconfig..
BOOTLOADER="grub2"A zaridi se vsechno, kompilace, skopirovani i rekonfigurace gruba. --- Dete s tim guuglem dopice!
grub-mkconfig nepoužívám a grub.cfg si píšu sám – není na tom nic těžkého, stačí něco jako:
insmod part_gpt
insmod vfat
insmod gfxterm
insmod all_video
# Pro nudloidní obrazovku
set gfxmode=2560x1080
terminal_input console
terminal_output gfxterm
# Menu se ukáže jen když do 3 sekund stisknu <Esc>
set timeout_style=countdown
set timeout=3
echo -ne "Press <Esc> to show GRUB menu. Time remaining: seconds\b\b\b\b\b\b\b\b"
# Tímhle můžu přepnout výchozí položku
set default=0
set linux_version=5.x.x-arch
set linux=/vmlinuz-$linux_version
set initramfs=/initramfs-$linux_version.img
menuentry 'Gentoo' {
linux $linux root=ZFS=drive/my/zfs/root dozfs …
initrd $initramfs
boot
}
menuentry '' { true; }
menuentry " Default: Linux $linux_version" { true; }
Pro aktualizaci jádra pozměním proměnnou $linux_version. Pokud nefunguje, změním ji zpět při bootu z konzole (také by šlo vytvořit menuentry, která verzi přepne). GRUB mám na vfat (na EFI System Partition).
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.