Dotaz: radeon 7000 a tv out

[majo]

ahojte.mám grafiku ati radeon 7000 a mandrake linux 9.1 bamboo. neide mi tv out.ked vlozm kabel na tv out do grafiky neide mi spustit graficke rozhranie.napise mi nieco ako screens found but not have usable configuration.pocul som ze sa to da rozchodit s ovladacmi gatos... ale neviem ako nato.mohli by ste mi prosim poradit ako to mam sprovoznit?

za odpoved vopred dakujem

Odpovědi

[Vlastimil Ott]

Ukázka mého /etc/X11/xorg.conf, tv karta PV951 (včetně dvou monitorů):

Section "ServerFlags"
	DefaultServerLayout 	"multihead"
	Option	"BlankTime"	"0"
	#Option	"Xinerama"	""
EndSection
Section "ServerLayout"
  Identifier "multihead"
  Screen "Screen1"
  Screen "Screen0" LeftOf "Screen1"
  InputDevice "Mouse0" "CorePointer"
  InputDevice "Keyboard0" "CoreKeyboard"
  Option	"Xinerama"	"true"
EndSection
Section "ServerLayout"
  Identifier "normal"
  Screen "Screen0"
  InputDevice "Mouse0" "CorePointer"
  InputDevice "Keyboard0" "CoreKeyboard"
  Option	"Xinerama"	"false"  
EndSection
Section "Files"
  RgbPath "/usr/X11R6/lib/X11/rgb"
    FontPath 	"/usr/X11R6/lib/X11/fonts/TTF"
    FontPath 	"/usr/X11R6/lib/X11/fonts/Type1"
    FontPath 	"/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath 	"/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "Module"
	Load  "record"
	Load  "xaa"
	Load  "extmod"
	Load  "drm"
	Load  "dbe"
	Load  "dri"
	Load  "v4l"
	Load  "GLcore"
	Load  "glx"
	Load  "xtrap"
	Load  "type1"
	Load  "freetype"
	Load  "xtt"
	Load  "speedo"
EndSection
Section "InputDevice"
  Identifier   "Keyboard0"
  Driver       "Keyboard"
  Option       "MapName" "Standard Keyboard [ pc105 + toggle ]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "cz,us"
  Option       "XkbModel" "pc105"
  Option       "XkbOptions" "grp:shift_toggle"
  Option       "XkbRules" "xfree86"
EndSection
Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/mouse"
	Option      "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
  Identifier "Monitor1"
  VendorName "Monitor Vendor"
  ModelName "Monitor Model"
  HorizSync 30-110
  VertRefresh 50-110
  Option	"DDCmode" "on"
  Option "dpms" "off"
EndSection
Section "Monitor"
  Identifier "Monitor0"
  VendorName "Monitor Vendor"
  ModelName "Monitor Model"
  HorizSync 40-130
  VertRefresh 60-130
  Option	"DDCmode" "off"
  Option "dpms" "off"
 Modeline "1600x1200"  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
 Modeline "1400x1050"  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync
 Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync
 Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
 Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
 Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
 Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
 Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
EndSection
Section "Device"
  Identifier "radeon0"
  Driver "ati"
  #Driver "radeon"
  VendorName "ATI Radeon VE"
  Option "AGPMode" "4"
  Option     "AGPFastWrite" "on"
  BusID "PCI:1:0:0"
  Screen 0
EndSection
Section "Device"
  Identifier "radeon1"
  Driver "ati"
  #Driver "radeon"
  VendorName "ATI Radeon VE"
  Option "AGPMode" "4"
  Option     "AGPFastWrite" "on"
  BusID "PCI:1:0:0"
  Option "MonitorLayout" "CRT, CRT"  
  Screen 1
EndSection
Section "Screen"
  Identifier "Screen1" 
  Device "radeon1"
  Monitor "Monitor1"
  DefaultDepth 16
  Subsection "Display"
   Depth 16
     #Modes "1280x1024" 
     Modes "1152x864" 
     Modes "1024x768" 
  EndSubsection
EndSection
Section "Screen"
  Identifier "Screen0" 
  Device "radeon0"
  Monitor "Monitor0"
  DefaultDepth 16
  Subsection "Display"
   Depth 16
   Modes "1280x1024" "1152x864" "1024x768" 
  EndSubsection
EndSection
Section "DRI"
  Mode 0666
EndSection

(Bohužel padám na hubu, takže více třeba zítra.)

[majo]

tak to dopis...

[majo]

nconf.emam xorg.conf ale x86config.neviem teraz presne jak sa vola ten subor.niesom teraz v linuxe.ale ja chcem hlavne ten gatos jak mam rozchodit resp nejak inak tv out.a nejlepsie ako navod v bodoch typu:

1.stiahni z gatos.sourceforge.net subor xyz.xyz 2.naloguj sa ako root 3.napis do konzoly xyz

proste takeho typu