Dotaz: USB Disk Freecom

[Zdenek Slama]

Zdravim! Podle vypisu dmesg je vsechno v poradku,moduly jsou zavedeny,hotplug rozpozna zarizeni,disk je naformatovany,ale nevim,jak jej pripojit

Mate nekdo tuseni,kde delam chybu ??

usb 1-1: new full speed USB device using address 7
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor: SAMSUNG   Model: SP0802N           Rev: TK10
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0,  type 0
USB Mass Storage device found at 7
bash-2.05b# mount /dev/sda1 /mnt/usbdisk/
mount: /dev/sda1 is not a valid block device
bash-2.05b# mount /dev/sda2 /mnt/usbdisk/
mount:.............

Zkusil jsem snad vsechna mozna zarizeni,ale vysledek je porad stejny Jinak USB mys,Fotoaparat a tiskarna jedou Mam Gentoo ,jadro 2.6.7-gentoo-r11....Diky.

Odpovědi

[jm]

mount /dev/sda /mnt/usbdisk taky ne?

[Zdeněk Burda]

mas modul sd_mod ?

zkus spustit jako root prikaz fdisk -l a uvidis jake zarizeni muzes mountovat

[Zdenek Slama]

Takze fdisk -l vypise jenom interi disk a modul sd_mod nemam a ani jej nemuzu najit

K cemu je to dobre ? musim prekompilovat jadro ?

[Libor Klepac]

bez nej to nepujde ...mozna je v jadre napevno ...no nevim

filename:       /lib/modules/2.6.9-cko2-smp-lev-2/kernel/drivers/scsi/sd_mod.ko
license:        GPL
author:         Eric Youngdale
description:    SCSI disk (sd) driver
vermagic:       2.6.9-cko2-smp-lev-2 SMP preempt PENTIUM4 gcc-3.3
depends:        scsi_mod

[Zdenek Slama]

Tak tam mam sr_mod.ko ??? Zkusim to natahnout a uvydime !

[Libor Klepac]

sr_mod je myslim pro cdromky .... btw .. .uvidime

[Zdenek Slama]

Tak zadna zmena a kdyz tam pripojim CD-ROM,tak to vypise :

usb 1-1: new full speed USB device using address 6
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor:           Model: 40X CD-ROM        Rev: 2.2A
  Type:   CD-ROM                             ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 1x/40x cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0,  type 5
USB Mass Storage device found at 6
bash-2.05b#

Takze to same v blede modrem

Jak zjistim,jestli ten modul mam v jadru ?? A pod cim to mam pri kompilaci hledat ? Diky!

[Libor Klepac]

jakto? tady zafungoval ten sr_mod modul ne?

Attached scsi CD-ROM sr0 at scsi3

ten vyber je v device drivers -> scsi ... normalne scsi disk support , etc ...

[Zdeněk Burda]

sr_mod ti funguje, cdrom je dostupna jako /dev/sr0

[Zdenek Slama]

Tak jo. CD-Rom funguje , ted kompiluji jadro s podporou SCSI disku. Netusil jsem,ze pri emulaci je ten modul take treba. Snad to rozchodim To bude asi take duvod,proc mi nechodi CF reader,ktery mi v Mindraku behal!

[m0d0r]

kujeeeeeeeeeeeeeeeeeeeeeeeeeeeem. vdaka tomuto som rozbehal moj usb kluc :):):):):)

[Libor Klepac]

tohle je muj vypis

Oct 31 20:15:59 leviathan kernel: usb 3-2: new full speed USB device using addre
ss 2
Oct 31 20:16:02 leviathan kernel: SCSI subsystem initialized
Oct 31 20:16:02 leviathan kernel: Initializing USB Mass Storage driver...
Oct 31 20:16:02 leviathan kernel: scsi0 : SCSI emulation for USB Mass Storage de
vices
Oct 31 20:16:03 leviathan kernel:   Vendor:           Model: USB DISK          R
ev: 2.0D
Oct 31 20:16:03 leviathan kernel:   Type:   Direct-Access                      A
NSI SCSI revision: 02
Oct 31 20:16:03 leviathan kernel: SCSI device sda: 507904 512-byte hdwr sectors 
(260 MB)
Oct 31 20:16:03 leviathan kernel: sda: assuming Write Enabled
Oct 31 20:16:03 leviathan kernel: sda: assuming drive cache: write through
Oct 31 20:16:03 leviathan kernel:  sda: sda1
Oct 31 20:16:03 leviathan kernel: Attached scsi removable disk sda at scsi0, cha
nnel 0, id 0, lun 0
Oct 31 20:16:04 leviathan kernel: USB Mass Storage device found at 2
Oct 31 20:16:04 leviathan kernel: usbcore: registered new driver usb-storage
Oct 31 20:16:04 leviathan kernel: USB Mass Storage support registered.

dokud se ti v tom tvem neobjevi radky s sda (sdx ..) , tak nemuzes brat ten disk jako disk ...ehm ...budto chybi ti podpora sd_mod (modul sd_mod nebo v jadre)

nevim ,jak se pracuje s sg zarizenim (sg0)....

[Libor Klepac]

a fuj ...uz zase mi to shodilo jadro ... restart