Sony Ericsson GC85

Zdravim. ma niekto skusenost, ako rozbehat PCMCIA kartu EDGE ??. Jadro 2.6.10 - podpora PCMCIA asi je lebo zariadenie po pichnuti sa ozve, zariadenie na pouzitie: /dev/tyS2. po zadani prikazu pppd vybehne hlaska:

Serial connection established.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS2
sent [LCP ConfReq id=0x1 < asyncmap 0x0> < magic 0xe9c9bc38> < pcomp> < accomp>]
rcvd [LCP ConfReq id=0x1 < asyncmap 0x0> < magic 0xe9c9bc38> < pcomp> < accomp>]

Tu je vela hlasok cca rovnakeho druhu 

< pcomp> < accomp>]
sent [LCP ConfNak id=0xa < magic 0x848ff8c7>]
rcvd [LCP ConfNak id=0xa < magic 0x848ff8c7>]
Serial line is looped back.
sent [LCP TermReq id=0xb "Loopback detected"]
rcvd [LCP TermReq id=0xb "Loopback detected"]
sent [LCP TermAck id=0xb]
rcvd [LCP TermAck id=0xb]
Connection terminated.

Sending break to the modem

PDP context detached
Serial link disconnected.

A to je vsetko ... Vie s tym niekto poradit? Ako sa pripojit.

Odpovědi

Dva doplnujici dotazy:
Opravdu to vytoci? Myslim tim, jestli probehne korektne chatscript.
Je to opravdu 'ttyS2'? Ne, ze by to nebylo mozne, ale me se (jina) GPRS PCMCIA karta hlasi jako 'ttyS16' nebo 'ttyS24' (podle pouziteho slotu).

je to urcite tam:
/dev/ttyS2 symlink do /dev/tts/2
Dalej tam este je aj /dev/tts/USB0 ale to asi nebude ono.
dmesg
ttyS2 at I/O 0x3e8 (irq=11) is a 16550A
toto pride po zasunuti karty.

Dotaz: Sony Ericsson GC85 - pppd

Odpovědi