Portál AbcLinuxu, 8. května 2025 18:24
pouzivam Fedora Core 3, mam nainstalovany ovladac generic "nv" a taky nvtv utilitu
o co jde:
absolutne si nerozumim s nvtv a to v tom, ze kdyz zapnu volbu TV ON, tak se mi zmeni rozliseni na monitoru a obraz se cely posle do televize, ale ani tam se nezobrazuje korektne. Dokonce i tusim kde je problem, bude to urcite v mym souboru xorg.conf
rovnou to poslu, aby bylo jasno o cem je rec:
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Proview 996N"
DisplaySize 370 270
HorizSync 30.0 - 98.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024" 150.0 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768"
"800x600" "640x480"
EndSubSection
EndSection
tohle je moje aktualni nastaveni.
monitor proview jede na rozliseni 1280x1024@85hz.
jake parametry bych mel nastavit, aby se mi ten tvout zacal chovat tak jak ma?
chtel bych ten tvout pouzivat predevsim na prehravani filmu na televizi, o nic jineho prakticky nejde. Jen potrebuju aby monitor i tvout jely zaroven (protoze mam tv daleko od pc)...
muzete prosim poradit?
16.3.2005 23:07
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
11.4.2005 17:49
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
Section "Device" Identifier "Card0" Driver "nvidia" VendorName "NVidia" BoardName "GeForce2 MX" Option "IgnoreEDID" "1" Option "TwinView" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;" Option "TVStandard" "PAL-G" EndSectiona uvidí se, jestli to pojede.
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz_qwerty"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Proview 996N"
DisplaySize 370 270
HorizSync 30.0 - 98.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024" 150.0 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
Option "dpms"
EndSection
#tohle by melo nastavit TELEVIZI
Section "Monitor"
Identifier "monitor1"
VendorName "Philips"
HorizSync 30-40
VertRefresh 50
DisplaySize 465 350
ModeLine "720x576/50p" 27 720 744 800 864 576 581 583 625 #27.0 MHz, 31.2 kHz, 50.0 Hz
Modeline "800x600/50p" 31.60 800 824 968 1000 600 602 603 632 #31.6 MHz, 31.6 kHz, 50.0 Hz
Option "dpms"
EndSection
#EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
Option "TwinView"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1280x1024, 800x600"
Option "ConnectedMonitor" "CRT, TV"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "COMPOSITE"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
11.4.2005 21:48
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
# Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz_qwerty"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Proview 996N"
DisplaySize 370 270
HorizSync 30.0 - 98.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024" 150.0 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
Option "dpms"
EndSection
#tohle by melo nastavit TELEVIZI
#tohle tam asi byt nemusi
Section "Monitor"
Identifier "monitor1"
VendorName "Philips"
HorizSync 30-40
VertRefresh 50
DisplaySize 465 350
ModeLine "720x576/50p" 27 720 744 800 864 576 581 583 625 #27.0 MHz, 31.2 kHz, 50.0 Hz
Modeline "800x600/50p" 31.60 800 824 968 1000 600 602 603 632 #31.6 MHz, 31.6 kHz, 50.0 Hz
Option "dpms"
EndSection
#EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
Option "IgnoreEDID" "1"
Option "TwinView"
Option "TwinViewOrientation" "Clone"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "ConnectedMonitor" "CRT, TV"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "COMPOSITE"
Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.