Portál AbcLinuxu, 5. května 2024 13:55
Playing dvd://.
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Could not open /dev/dvd with libdvdcss.
libdvdread: Can't open /dev/dvd for reading
Couldn't open DVD device: /dev/dvd
mplayer pustam mplayer dvd://. podotikam, ze za roota viem prehrat DVD aj ked nie je namountovane
dakujem
swigrid ~ # gpasswd -a swigrid cdrw cdrom video
Adding user swigrid to group cdrw
swigrid ~ # exit
logout
swigrid@swigrid ~ $ mplayer dvd://
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale
MPlayer 1.0pre7-3.3.5-20050130 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX 3DNow 3DNowEx SSE
85 audio & 196 video codecs
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : Permission denied
Can't init input joystick
Playing dvd://.
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Could not open /dev/dvd with libdvdcss.
libdvdread: Can't open /dev/dvd for reading
Couldn't open DVD device: /dev/dvd
Exiting... (End of file)
gpasswd -a swigrid cdrom gpasswd -a swigrid video
Playing dvd://.
libdvdread: Using libdvdcss version 1.2.8 for DVD access
libdvdread: Could not open /dev/dvd with libdvdcss.
libdvdread: Can't open /dev/dvd for reading
Couldn't open DVD device: /dev/dvd
Exiting... (End of file)
cat /etc/fstab; id swigrid
ked som dal
swigrid ~ # cat /etc/fstab; id swigrid
tak mi vypisalo toto:
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/ fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# < fs > < mountpoint > < type > < opts > < dump/pass >
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
#/dev/BOOT /boot ext2 noauto,noatime 1 1
/dev/sda4 / ext3 noatime 0 0
/dev/sda5 /mnt/d vfat iocharset=iso8859-1,codepage=850,umask=0,auto,quiet 0 0
/dev/sda3 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/dvd iso9660 noauto,ro 0 0
/dev/cdroms/cdrom1 /mnt/cdrw iso9660 noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0 0
uid=1000(swigrid) gid=100(users) groups=100(users),10(wheel),18(audio),19(cdrom),27(video),35(games),80(cdrw)
/dev/cdroms/cdrom0 /mnt/dvd iso9660 noauto,ro 0 0 /dev/cdroms/cdrom1 /mnt/cdrw iso9660 noauto,ro 0 0změň na
/dev/cdroms/cdrom0 /mnt/dvd iso9660 users,noauto,ro 0 0 /dev/cdroms/cdrom1 /mnt/cdrw iso9660 users,noauto,ro 0 0Pak
/etc/init.d/ivman restarta snad to půjde.. když ne, ta řekni, co ti vypíše
emerge -pv ivman dbus
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N ] app-doc/doxygen-1.4.3-r1 +doc +qt -tetex 0 kB
[ebuild N ] sys-apps/hal-0.4.8 +debug +doc -livecd -pcmcia 1,321 kB
[ebuild N ] sys-apps/ivman-0.5_pre3 +debug 228 kB
Total size of downloads: 1,550 kB
no ale tu uz teraz vidim problem, prvy subor co treba nainstalovat, ten doxygen. som dnes rano roby celkovy uprade systemu a na tom to zastalo. a este som neskumal ze co to, ale toto je kratky vypis hlasky (dufam ze je tam nieco co ti bude davat zmysel)
sh: latex: command not found
Problems running latex. Check your installation or look for typos in _formulas.tex!
Generating image form_0.png for formula
sh: dvips: command not found
Problems running dvips. Check your installation!
# @cp Makefile.latex ../latex/Makefile
# @sed -e "s/\$VERSION/1.4.3/g" doxygen_manual.tex >../latex/doxygen_manual.tex
# @sed -e "s/\$VERSION/1.4.3/g" doxygen.sty >../latex/doxygen.sty
# @epstopdf doxygen_logo.eps --outfile=../latex/doxygen_logo.pdf
gmake[1]: Leaving directory `/var/tmp/portage/doxygen-1.4.3-r1/work/doxygen-1.4.3/doc'
--------------------------- ACCESS VIOLATION SUMMARY ---------------------------
LOG FILE = "/var/log/sandbox/sandbox-app-doc_-_doxygen-1.4.3-r1-3499.log"
/etc/fstab
. Doufám, že mě za tuhle radu nebude nikdo kamenovat... no a když to nepůjde, tak ti musí poradit někdo jiný, sorry, taky začínám
open_wr: /usr/lib/graphviz/config
open_wr: /usr/lib/graphviz/config
open_wr: /usr/lib/graphviz/config
open_wr: /usr/lib/graphviz/config
open_wr: /usr/lib/graphviz/config
a opakuje sa tato hlaska v logu asi aj 50x mozno aj viac
groups=100(users),10(wheel),18(audio),19(cdrom),27(video),35(games),80(cdrw)
Tady vidíš, že se tam ty nový skupiny nevyskytují. Změna skupin se projeví až po novým přihlášení uživatele ;)
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.