moja konfiguracia conky 3

Portál AbcLinuxu, 30. dubna 2025 10:09

moja konfiguracia conky 3

24.12.2012 21:43 | Přečteno: 966× | linux | poslední úprava: 25.12.2012 00:05

Po nejakom čase znovu idem písať o panely conky. Odkazy na predchádzajúce blogy: Link1 Link2

Úvod

V tomto zápise popíšem novší vzhľad panela conky a zverejním opravy staršej verzie.

Zmeny

Zmenšenie panela oproti verzii popísanej v blogu č.2 o conky
Odstranenie zobrazovania verzie jadra a rozlíšenia i386 a i686
Zmena zdroja ukazatela teploty CPU, pridanie ukazateľa pre teplotu MB, otáčky ventilátora CPU a skrine, indikátory napätia jednotlivých napájacich vetiev MB.
Farebné rozlíšenie teplot od CPU a MB, textové informácie o hodnotách teploty a otáčok. Z dôvodu spracovania číselných hodnôt len na celé čísla nebolo možne urobiť funkčné farebné rozlíšenie pre napätia napajácich vetiev. Tieto ukazateľe je nutné konfigurovať na správne hodnoty pre konkrétny systém v záujme o ochanu CPU pred tepeľným preťaženým a poškodeným. Napríklad u CPU AMD FX4100 je max 70°C.
V prípade poklesu otáčok ventilátorov sa zobrazí červený nápis FAILURE pri prislušnom zlyhanom ventilátore.
Zmena typu ukazateľa využitia CPU a rozhodovacích hodnót. Úspora miesta na ploche. Dodatočný ukazateľ využitia CPU pomocou jednoznakových ukazateľov.
Zmena ukazateľa ceľkového vyťaženia na textovú informáciu s farebnou indikáciou vyťaženia, plus textové vyjadrenie zaťaženia.
Zmena spôsobu zobrazenie ceľkovej RAM. Pri menej ako 60% využitej RAM je popisok RAM šedej farby. Pri menej ako 70% dôjde k zmene farby hodnoty ceľkovej RAM na žltu farbu. Pri prekročení danej hranice budú obidva údaje červenej farby.
Ukazateľ využitej RAM mení farbu podľa predchadzajúcej položky. Rozdiel je len v tom, že hodnota pod 60% je indikovaná zelenou farbou a popisok nemení farbu.
Položka volna zobrazuje voľnú RAM a položky Buffers a Cached sú pridané.
Grafický ukazateľ sa riadi rovnakou logikou ako textový ukázateľ volnej RAM.
Ako doplnok je prítomný varovný textový ukazateľ využitia RAM. Pri viac ako 60% bude zobrazený text "RAM Usage Warning" a pri prekročení 70% bude zobrazení text "RAM Usage HIGH"
SWAP sekcia sa riadi podobnými pravidlami ako sekcia o RAM. Pri prekročení 70% hranice sa zobrazi červeny varovný text "EXPECT OOM killer"
Zmena usporiadanie sekcie IO operácii na blokových zariadenia. Skrátenie označenia sekcie. Vloženie read a write operácii na spoločný riadok a v prípade nulovej aktivity dôjde k skrytiu nulových hodnôt.
Časť využitia diskového priestoru a rozdelenia na pripojné body. Zmena informácie o využiti jednotlivých části filesystému sú na jednom riadku.
Časť prenosu cez sieť. Údaje o prenose dát majú podobnú logiku ako predchádzajúca časť.

Popis části zdrojového kódu.

Funkcie na získavanie informácii v paneli conky sú popísané v man stránke.Všetky funkcie použité sú v rámci zabudovaných súčasti panela conky.

Prvá časť

V tejto časti sú k dispozícii údaje o čase, ktorý je systém spustený a informácia o názve PC

TEXT
${color grey}Uptime:$color $uptime_short
${color grey}Hostname:$color $nodename

Druha časť

Táto časť poskytuje informácie počte aktívnych procesov a záťaži v 1/5/15.

${color grey}Procesy
${color grey}Celkom: ${color} $processes \
${color grey}Beziace: ${color} $running_processes
${color grey}Zataz: ${loadavg}

Tretia časť

Táto časť poskytuje informácie o teplote,otáčkach ventilátorov a stave napájania MB. V tejto sekcii sú definované aj farebné schémy na základe hodnôt teploty, otáčok a napätia.

${if_match ${hwmon temp 1} < 50}${color grey}CPUTEMP1:${color green}${hwmon temp 1}$else${if_match ${hwmon temp 1} < 60}${color yellow}CPUTEMP1:${hwmon temp 1}$else${color red}CPUTEMP1:${hwmon temp 1}$endif$endif
${if_match ${hwmon temp 1} < 69}${color green}CPU TEMP OK$else${color red}CPU TEMP PEAK$endif
${if_match ${hwmon temp 2} < 40}${color grey}MBTEMP1:${color green}${hwmon temp 2}$else${if_match ${hwmon temp 2} < 50 }${color yellow}MBTEMP1:${hwmon temp 2}$else${color red}MBTEMP:${hwmon temp 2}$endif$endif
${if_match ${hwmon temp 2} < 49}${color green}MB TEMP OK$else${color red}MB TEMP PEAK$endif
${if_match ${hwmon fan 1} > 600}${color grey}CPUFAN1:${color green}${hwmon fan 1}RPM$else${color red}CPUFAN1 FAILURE$endif
${if_match ${hwmon fan 2} > 600}${color grey}CHAFAN1:${color green}${hwmon fan 2}RPM$else${color red}MDFAN1 FAILURE$endif
${color grey}Vcore:	${hwmon vol 0}V	
${color grey}+3.3V:	${hwmon vol 1}V
${color grey}+5  V:	${hwmon vol 2}V
${color grey}+12 V:	${hwmon vol 3}V

Štvrtá časť

Časť indikácie využitia CPU.

${if_match ${cpu cpu1} <=60}${color green}CPU1:${cpubar cpu1 5,100}$else${if_match ${cpu cpu1} < 80}${color yellow}CPU1:${cpubar cpu1 5,100}$else${color red}CPU1:${cpubar cpu1 5,100}$endif$endif	${if_match ${cpu cpu1} == 0}${color}I$else${if_match ${cpu cpu1} <=60}${color green}L$else${if_match ${cpu cpu1} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu2} <=60}${color green}CPU2:${cpubar cpu2 5,100}$else${if_match ${cpu cpu2} < 80}${color yellow}CPU2:${cpubar cpu2 5,100}$else${color red}CPU2:${cpubar cpu2 5,100}$endif$endif	${if_match ${cpu cpu2} == 0}${color}I$else${if_match ${cpu cpu2} <=60}${color green}L$else${if_match ${cpu cpu2} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu3} <=60}${color green}CPU3:${cpubar cpu3 5,100}$else${if_match ${cpu cpu3} < 80}${color yellow}CPU3:${cpubar cpu3 5,100}$else${color red}CPU3:${cpubar cpu3 5,100}$endif$endif	${if_match ${cpu cpu3} == 0}${color}I$else${if_match ${cpu cpu3} <=60}${color green}L$else${if_match ${cpu cpu3} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu4} <=60}${color green}CPU4:${cpubar cpu4 5,100}$else${if_match ${cpu cpu4} < 80}${color yellow}CPU4:${cpubar cpu4 5,100}$else${color red}CPU4:${cpubar cpu4 5,100}$endif$endif	${if_match ${cpu cpu4} == 0}${color}I$else${if_match ${cpu cpu4} <=60}${color green}L$else${if_match ${cpu cpu4} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu} < 50}${color green}TOTAL USAGE ${cpu}%$else${if_match ${cpu} < 60}${color yellow}TOTAL USAGE ${cpu}%$else${if_match ${cpu} < 75}${color orange}TOTAL USAGE ${cpu}%$else${color red}TOTAL USAGE ${cpu}%$endif$endif$endif	${if_match ${cpu} < 10}${color}IDLE$else${if_match ${cpu} < 50}${color green}LOW$else${if_match ${cpu} < 60}${color yellow}MEDIUM$else${color red}HIGH$endif$endif$endi

Piata časť

V tejto části sú indikátory využitia RAM

${if_match $memperc <= 60}${color grey}RAM: ${color}$memmax$else${if_match $memperc < 70}${color grey}RAM: ${color yellow}$memmax$else${color red}RAM :$memmax$endif$endif
${color grey}Pouzita: ${if_match $memperc <= 60}${color green}$mem - $memperc%$else${if_match $memperc < 70}${color yellow}$mem - $memperc%$else${color red}$mem - $memperc$endif$endif
${color grey}Volna:$color $memfree
${color grey}Buffers:$color $buffers
${color grey}Cached:$color  $cached
${color grey}RAM:	${if_match $memperc <= 60}${color green}${membar 5,100}$else${if_match $memperc < 70}${color yellow}${membar 5,100}$else${color red}${membar 5,100}$endif$endif
${if_match $memperc <= 60}${color}$else${if_match  $memperc < 70}${color yellow}RAM usage Warning$else${color red}RAM usage HIGH$endif$endi

Šiesta časť

Informácie o využiti SWAP priestoru.

${if_match $swapperc <= 60}${color grey}SWAP: ${color}$swapmax$else${if_match $swapperc < 70}${color grey}SWAP: ${color yellow}$swapmax$else${color red}SWAP: $swapmax$endif$endif
${color grey}Pouzity: ${if_match $swapperc <=60}${color green}$swap - $swapperc%$else${if_match $swapperc < 70}${color yellow}$swap - $swapperc%$else${color red}$swap - $swapperc$endif$endif 
${color grey}Volny:$color $swapfree
${if_match $swapperc == 0 }${color green}SWAP USAGE 0%$else${color grey}SWAP:	${if_match $swapperc <=60}${color green}${swapbar 5,100}$else${if_match $swapperc <70}${color yellow}${swapbar 5,100}$else${color red}${swapbar 5,100}$endif$endif$endif 
${if_match $swapperc <= 60}${color}$else${if_match $swapperc < 70}${color yellow}SWAP usage Warning$else${color red}SWAP usage HIGH.$endif$endif
${if_match $swapperc < 70}$color$else${color red} EXPECT OOM killer$endif

Siedma časť

IO operácie blokových zariadení.

${color grey}I/O:
${if_match "${diskio_read}" == "0B"}${color grey}Read:$else${color grey}Read:$color${diskio_read}$endif	${if_match "${diskio_write}" == "0B"}${color grey}Write:$else${color grey}Write:$color${diskio_write}$endif

Osma časť

Informácia o využiti jednotlivých části filesystému.

${color grey}Filesystem:
${if_mounted /}${fs_size /}			${color grey}${if_match ${fs_used_perc /} < 75 }${color green}${fs_free /}$else${if_match ${fs_used_perc /} < 90 }$color${color yellow}${fs_free /}$else${color red}${fs_free /}$endif$endif${color grey}	/$endif
${if_mounted /home}${fs_size /home}			${color grey}${if_match ${fs_used_perc /home} < 75 }${color green}${fs_free /home}$else${if_match ${fs_used_perc /home} < 90 }$color${color yellow}${fs_free /home}$else${color red}${fs_free /home}$endif$endif${color grey}	/home$endif
${if_mounted /var}${fs_size /var}		${color grey}${if_match ${fs_used_perc /var} < 75 }${color green}${fs_free /var}$else${if_match ${fs_used_perc /var} < 90 }$color${color yellow}${fs_free /var}$else${color red}${fs_free /var}$endif$endif${color grey}	/var$endif
${if_mounted /usr}${fs_size /usr}		${color grey}${if_match ${fs_used_perc /usr} < 75 }${color green}${fs_free /usr}$else${if_match ${fs_used_perc /usr} < 90 }$color${color yellow}${fs_free /usr}$else${color red}${fs_free /usr}$endif$endif${color grey}	/usr$endif
${if_mounted /usr/src}${fs_size /usr/src}		${color grey}${if_match ${fs_used_perc /usr/src} < 75 }${color green}${fs_free /usr/src}$else${if_match ${fs_used_perc /usr/src} < 90 }$color${color yellow}${fs_free /usr/src}$else${color red}${fs_free /usr/src}$endif$endif${color grey}	/usr/src$endif
${if_mounted /opt}${fs_size /opt}		${color grey}${if_match ${fs_used_perc /opt} < 75 }${color green}${fs_free /opt}$else${if_match ${fs_used_perc /opt} < 90 }$color${color yellow}${fs_free /opt}$else${color red}${fs_free /opt}$endif$endif${color grey}	/opt$endif

Deviata časť

Činnosť sieťového rozhrania.

${color grey}Networking:
${if_up eth0}${if_match "${upspeed eth0}" == "0B"}${color grey}Up:$else${color grey}Up:$color${upspeed eth0}$endif	${if_match "${downspeed eth0}" == "0B"}${color grey}Down:$else${color grey}Down:$color${downspeed eth0}$endif$endif

Záver

Na záver prikládam celé konfiguračné súbory pre blog moja configurácia conky 2 a 3. Predpokladám, že kód je dostatočne zrozumiteľný.

conky.conf pre moja configuracia conky 2

alignment bottom_right
background yes
border_width 1
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
diskio_avg_samples 2
use_xft no
xftfont DejaVu Sans Mono:size=10
gap_x 10
gap_y 30
minimum_size 5 5
net_avg_samples 2
out_to_console no
out_to_stderr no
extra_newline no
own_window yes
own_window_class panel_1
own_window_type panel
stippled_borders 0
update_interval 1
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
double_buffer

TEXT
${color grey}Uptime:$color $uptime
${color grey}Hostname:$color $nodename 
$hr
${color grey}Procesy
${color grey}Celkom: ${color} $processes \
${color grey}Beziace: ${color} $running_processes
${color grey}Zataz: ${loadavg}
$color\
$hr
${color grey}CPUTEMP:	${hwmon temp 1}
${color grey}MBTEMP:	${hwmon temp 2}
${color grey}CPUFAN1:	${hwmon fan 1}RPM
${color grey}CHAFAN1:	${hwmon fan 2}RPM
${color grey}Vcore:		${hwmon vol 0}V
${color grey}+3.3V:		${hwmon vol 1}V
${color grey}+5V:		${hwmon vol 2}V
${color grey}+12V:		${hwmon vol 3}V
$hr
${color}\
${if_match ${cpu cpu1} < 80}${color grey}CPU1$else${color red}CPU1$endif				${if_match ${cpu cpu2} < 80}${color grey}CPU2$else${color red}CPU2$endif				${if_match ${cpu cpu3} < 80}${color grey}CPU3$else${color red}CPU3$endif				${if_match ${cpu cpu4} < 80}${color grey}CPU4$else${color red}CPU4$endif 
${if_match ${cpu cpu1} <= 50}${color green}${cpugauge cpu1 (10,10)}$else${if_match ${cpu cpu1} <= 80}${color yellow}${cpugauge cpu1 (10,10)}$else${color red}${cpugauge cpu1 (10,10)}$endif$endif${color}	${if_match ${cpu cpu2} <= 50}${color green}${cpugauge cpu2 (10,10)}$else${if_match ${cpu cpu2} <= 80}${color yellow}${cpugauge cpu2 (10,10)}$else${color red}${cpugauge cpu2 (10,10)}$endif$endif${color}	${if_match ${cpu cpu3} <= 50}${color green}${cpugauge cpu3 (10,10)}$else${if_match ${cpu cpu3} <= 80}${color yellow}${cpugauge cpu3 (10,10)}$else${color red}${cpugauge cpu3 (10,10)}$endif$endif${color}	${if_match ${cpu cpu4} <= 50}${color green}${cpugauge cpu4 (10,10)}$else${if_match ${cpu cpu4} <= 80}${color yellow}${cpugauge cpu4 (10,10)}$else${color red}${cpugauge cpu4 (10,10)}$endif$endif${color}
${if_match ${cpu cpu} <= 50}${color green}${cpubar cpu (100,10)}$else${if_match ${cpu cpu} <= 80}${color yellow}${cpubar cpu (100,10)}$else${color red}${cpubar cpu (10,100)}$endif$endif${color}
$hr
${if_match ${memperc} < 80}${color grey}RAM:	$memmax$else${color red}RAM:	$memmax $endif
${if_match ${memperc} <=60}${color grey}Pouzita: ${color green}$mem  - $memperc%$else${if_match ${memperc} <=80}${color grey}Pouzita: ${color yellow}$mem  - $memperc%$else${color red}Pouzita: ${color red}$mem  - $memperc%$endif$endif
${if_match ${memperc} <=60}${color green}${membar (10,100)}$else${if_match ${memperc} <=80}${color yellow}${membar (10,100)}$else${color red}${membar (10,100)}$endif$endif
${color grey}Volna: ${color}$memfree
${color grey}Buffer:	${color}${buffers}
${color grey}Cached:	${color}${cached}
$hr
$color${if_match "${swap}" == "0B"}${color grey}Swap:	$swapfree$else${if_match ${swapperc} < 70 }${color green}Swap:	$swapfree$else${if_match {$swapperc} => 70}${color red}Swap:	$swapfree$endif$endif
$color${if_match "${swap}" == "0B"}${color grey}Pouzite: $else${if_match ${swapperc} < 70}${color green}Pouzite: $else${if_match ${swapperc} => 70}${color red}Pouzite: $endif$endif$color${if_match "${swap}" == "0B"}${color grey}$swap $else${if_match ${swapperc} < 70}${color green}$swap $else${if_match ${swapperc} => 70}${color red}$swap $endif$endif$color - $swapperc %
$color${if_match ${swapperc} == 0}${color grey}NO SWAP$else${if_match ${swapperc} < 70}${color green}${swapbar (10,100)}$else${if_match ${swapperc} => 70}${color red}${swapbar (10,100)}$endif$endif$endif
$color$hr
${color grey}Disk:
${color grey}Pocet I/O citanie: ${color}${diskio_read sda} 
${color grey}Pocet I/O zapis:   ${color}${diskio_write sda}
${color grey}\
$hr
${color grey}Filesystem:
${color grey}/
${fs_size /}			${color grey}${if_match ${fs_used_perc /} < 75 }${color green}${fs_free /}$else${if_match ${fs_used_perc /} < 90 }$color${color yellow}${fs_free /}$else${color red}${fs_free /}$endif$endif
${color grey}/home
${fs_size /home}			${color grey}${if_match ${fs_used_perc /home} < 75 }${color green}${fs_free /home}$else${if_match ${fs_used_perc /home} < 90 }$color${color yellow}${fs_free /home}$else${color red}${fs_free /home}$endif$endif
${color grey}/var
${fs_size /var}		${color grey}${if_match ${fs_used_perc /var} < 75 }${color green}${fs_free /var}$else${if_match ${fs_used_perc /var} < 90 }$color${color yellow}${fs_free /var}$else${color red}${fs_free /var}$endif$endif
${color grey}/usr
${fs_size /usr}		${color grey}${if_match ${fs_used_perc /usr} < 75 }${color green}${fs_free /usr}$else${if_match ${fs_used_perc /usr} < 90 }$color${color yellow}${fs_free /usr}$else${color red}${fs_free /usr}$endif$endif
${color grey}/usr/src
${fs_size /usr/src}		${color grey}${if_match ${fs_used_perc /usr/src} < 75 }${color green}${fs_free /usr/src}$else${if_match ${fs_used_perc /usr/src} < 90 }$color${color yellow}${fs_free /usr/src}$else${color red}${fs_free /usr/src}$endif$endif
${color grey}/opt
${fs_size /opt}		${color grey}${if_match ${fs_used_perc /opt} < 75 }${color green}${fs_free /opt}$else${if_match ${fs_used_perc /opt} < 90 }$color${color yellow}${fs_free /opt}$else${color red}${fs_free /opt}$endif$endif
$color\
$hr
${color grey}Networking:
${color grey}Up:${color}${upspeed eth0}
${color grey}Down:${color}${downspeed eth0}

conky.conf pre moja configuracia conky 3

alignment bottom_right
background yes
border_width 1
default_color white
default_outline_color white
default_shade_color white
draw_borders no
draw_graph_borders yes
draw_outline no
draw_shades no
#diskio_avg_samples 2
use_xft no
xftfont DejaVu Sans Mono:size=10
gap_x 10
gap_y 30
minimum_size 5 5
#net_avg_samples 2
out_to_console no
out_to_stderr no
extra_newline no
own_window yes
own_window_class panel_1
own_window_type panel
stippled_borders 0
update_interval 1
uppercase no
use_spacer none
show_graph_scale no
show_graph_range no
double_buffer
short_units

TEXT
${color grey}Uptime:$color $uptime_short
${color grey}Hostname:$color $nodename 
$hr
${color grey}Procesy
${color grey}Celkom: ${color} $processes \
${color grey}Beziace: ${color} $running_processes
${color grey}Zataz: ${loadavg}
$color\
$hr
${if_match ${hwmon temp 1} < 50}${color grey}CPUTEMP1:${color green}${hwmon temp 1}$else${if_match ${hwmon temp 1} < 60}${color yellow}CPUTEMP1:${hwmon temp 1}$else${color red}CPUTEMP1:${hwmon temp 1}$endif$endif
${if_match ${hwmon temp 1} < 69}${color green}CPU TEMP OK$else${color red}CPU TEMP PEAK$endif
${if_match ${hwmon temp 2} < 40}${color grey}MBTEMP1:${color green}${hwmon temp 2}$else${if_match ${hwmon temp 2} < 50 }${color yellow}MBTEMP1:${hwmon temp 2}$else${color red}MBTEMP:${hwmon temp 2}$endif$endif
${if_match ${hwmon temp 2} < 49}${color green}MB TEMP OK$else${color red}MB TEMP PEAK$endif
${if_match ${hwmon fan 1} > 600}${color grey}CPUFAN1:${color green}${hwmon fan 1}RPM$else${color red}CPUFAN1 FAILURE$endif
${if_match ${hwmon fan 2} > 600}${color grey}CHAFAN1:${color green}${hwmon fan 2}RPM$else${color red}MDFAN1 FAILURE$endif
${color grey}Vcore:	${hwmon vol 0}V	
${color grey}+3.3V:	${hwmon vol 1}V
${color grey}+5  V:	${hwmon vol 2}V
${color grey}+12 V:	${hwmon vol 3}V
$hr
${color}\
${if_match ${cpu cpu1} <=60}${color green}CPU1:${cpubar cpu1 5,100}$else${if_match ${cpu cpu1} < 80}${color yellow}CPU1:${cpubar cpu1 5,100}$else${color red}CPU1:${cpubar cpu1 5,100}$endif$endif	${if_match ${cpu cpu1} == 0}${color}I$else${if_match ${cpu cpu1} <=60}${color green}L$else${if_match ${cpu cpu1} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu2} <=60}${color green}CPU2:${cpubar cpu2 5,100}$else${if_match ${cpu cpu2} < 80}${color yellow}CPU2:${cpubar cpu2 5,100}$else${color red}CPU2:${cpubar cpu2 5,100}$endif$endif	${if_match ${cpu cpu2} == 0}${color}I$else${if_match ${cpu cpu2} <=60}${color green}L$else${if_match ${cpu cpu2} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu3} <=60}${color green}CPU3:${cpubar cpu3 5,100}$else${if_match ${cpu cpu3} < 80}${color yellow}CPU3:${cpubar cpu3 5,100}$else${color red}CPU3:${cpubar cpu3 5,100}$endif$endif	${if_match ${cpu cpu3} == 0}${color}I$else${if_match ${cpu cpu3} <=60}${color green}L$else${if_match ${cpu cpu3} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu cpu4} <=60}${color green}CPU4:${cpubar cpu4 5,100}$else${if_match ${cpu cpu4} < 80}${color yellow}CPU4:${cpubar cpu4 5,100}$else${color red}CPU4:${cpubar cpu4 5,100}$endif$endif	${if_match ${cpu cpu4} == 0}${color}I$else${if_match ${cpu cpu4} <=60}${color green}L$else${if_match ${cpu cpu4} < 80}${color yellow}M$else${color red}H$endif$endif$endif
${if_match ${cpu} < 50}${color green}TOTAL USAGE ${cpu}%$else${if_match ${cpu} < 60}${color yellow}TOTAL USAGE ${cpu}%$else${if_match ${cpu} < 75}${color orange}TOTAL USAGE ${cpu}%$else${color red}TOTAL USAGE ${cpu}%$endif$endif$endif	${if_match ${cpu} < 10}${color}IDLE$else${if_match ${cpu} < 50}${color green}LOW$else${if_match ${cpu} < 60}${color yellow}MEDIUM$else${color red}HIGH$endif$endif$endif
${color}\
$hr
${if_match $memperc <= 60}${color grey}RAM: ${color}$memmax$else${if_match $memperc < 70}${color grey}RAM: ${color yellow}$memmax$else${color red}RAM :$memmax$endif$endif
${color grey}Pouzita: ${if_match $memperc <= 60}${color green}$mem - $memperc%$else${if_match $memperc < 70}${color yellow}$mem - $memperc%$else${color red}$mem - $memperc$endif$endif
${color grey}Volna:$color $memfree
${color grey}Buffers:$color $buffers
${color grey}Cached:$color  $cached
${color grey}RAM:	${if_match $memperc <= 60}${color green}${membar 5,100}$else${if_match $memperc < 70}${color yellow}${membar 5,100}$else${color red}${membar 5,100}$endif$endif
${if_match $memperc <= 60}${color}$else${if_match  $memperc < 70}${color yellow}RAM usage Warning$else${color red}RAM usage HIGH$endif$endif
${color}\
$hr
${if_match $swapperc <= 60}${color grey}SWAP: ${color}$swapmax$else${if_match $swapperc < 70}${color grey}SWAP: ${color yellow}$swapmax$else${color red}SWAP: $swapmax$endif$endif
${color grey}Pouzity: ${if_match $swapperc <=60}${color green}$swap - $swapperc%$else${if_match $swapperc < 70}${color yellow}$swap - $swapperc%$else${color red}$swap - $swapperc$endif$endif 
${color grey}Volny:$color $swapfree
${if_match $swapperc == 0 }${color green}SWAP USAGE 0%$else${color grey}SWAP:	${if_match $swapperc <=60}${color green}${swapbar 5,100}$else${if_match $swapperc <70}${color yellow}${swapbar 5,100}$else${color red}${swapbar 5,100}$endif$endif$endif 
${if_match $swapperc <= 60}${color}$else${if_match $swapperc < 70}${color yellow}SWAP usage Warning$else${color red}SWAP usage HIGH.$endif$endif
${if_match $swapperc < 70}$color$else${color red} EXPECT OOM killer$endif
$color\
$hr
${color grey}I/O:
${if_match "${diskio_read}" == "0B"}${color grey}Read:$else${color grey}Read:$color${diskio_read}$endif	${if_match "${diskio_write}" == "0B"}${color grey}Write:$else${color grey}Write:$color${diskio_write}$endif
${color }\
$hr
${color grey}Filesystem:
${if_mounted /}${fs_size /}			${color grey}${if_match ${fs_used_perc /} < 75 }${color green}${fs_free /}$else${if_match ${fs_used_perc /} < 90 }$color${color yellow}${fs_free /}$else${color red}${fs_free /}$endif$endif${color grey}	/$endif
${if_mounted /home}${fs_size /home}			${color grey}${if_match ${fs_used_perc /home} < 75 }${color green}${fs_free /home}$else${if_match ${fs_used_perc /home} < 90 }$color${color yellow}${fs_free /home}$else${color red}${fs_free /home}$endif$endif${color grey}	/home$endif
${if_mounted /var}${fs_size /var}		${color grey}${if_match ${fs_used_perc /var} < 75 }${color green}${fs_free /var}$else${if_match ${fs_used_perc /var} < 90 }$color${color yellow}${fs_free /var}$else${color red}${fs_free /var}$endif$endif${color grey}	/var$endif
${if_mounted /usr}${fs_size /usr}		${color grey}${if_match ${fs_used_perc /usr} < 75 }${color green}${fs_free /usr}$else${if_match ${fs_used_perc /usr} < 90 }$color${color yellow}${fs_free /usr}$else${color red}${fs_free /usr}$endif$endif${color grey}	/usr$endif
${if_mounted /usr/src}${fs_size /usr/src}		${color grey}${if_match ${fs_used_perc /usr/src} < 75 }${color green}${fs_free /usr/src}$else${if_match ${fs_used_perc /usr/src} < 90 }$color${color yellow}${fs_free /usr/src}$else${color red}${fs_free /usr/src}$endif$endif${color grey}	/usr/src$endif
${if_mounted /opt}${fs_size /opt}		${color grey}${if_match ${fs_used_perc /opt} < 75 }${color green}${fs_free /opt}$else${if_match ${fs_used_perc /opt} < 90 }$color${color yellow}${fs_free /opt}$else${color red}${fs_free /opt}$endif$endif${color grey}	/opt$endif
$color\
$hr
${color grey}Networking:
${if_up eth0}${if_match "${upspeed eth0}" == "0B"}${color grey}Up:$else${color grey}Up:$color${upspeed eth0}$endif	${if_match "${downspeed eth0}" == "0B"}${color grey}Down:$else${color grey}Down:$color${downspeed eth0}$endif$endif

EDIT : Pridanie screenshotu pri idle.25122012 00:02