Portál AbcLinuxu, 30. dubna 2025 22:29
Slackware 12.0 a můj /etc/swaret.conf (swaret 1.6.3). Mám na svém počítači nainstalován Slackware 12.0. Protože jsem od přírody liný, tak jsem hledal nástroj pro (automatické) aktualizace systému. A našel jsem -- swaret. Níže naleznete můj konfigurační soubor swaretu 1.6.3. (Můžete si ho pochopitelně upravit.)
Velmi doporučuji si přečíst manuálovou stránku swaretu a jeho konfiguračního souboru! Viz man swaret, resp. man swaret.conf.
########################################################### # # swaret.conf, Version: 1.6.3 # ### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ### # # Define a valid Slackware Linux Version. # (Used for Dependency Support and other Features) # # NOTE: If you want to use Slackware Linux Current, # set VERSION to 'current' (VERSION=current). # VERSION=12.0 # # Define the language for status and error messages LANGUAGE=ENGLISH # # ---------------------------------------------------------- # Define Slackware (8.1 or Higher or Current) Linux Mirrors. # (Used for Official Slackware Linux Packages) # (Slackware Linux Mirrors available at http://www.slackware.com) # # Syntax: ROOT=PROTOCOL:URL # # NOTE: swaret will use the order of the specified ROOT URL's. # #ROOT=file:/mnt/cdrom #ROOT=file:/mnt/dvdrom #ROOT=file:/mnt/usbmemstick #ROOT=ftp://ftp.nluug.nl/pub/os/Linux/distr/slackware/slackware-$VERSION #ROOT=http://sunsite.cnlab-switch.ch/ftp/mirror/slackware/slackware-$VERSION #ROOT=ftp://ftp.slackware.no/pub/linux/slackware/slackware-$VERSION #ROOT=http://www.slackware.no/slackware/slackware-$VERSION #ROOT=ftp://ftp.slackware.at/slackware-$VERSION #ROOT=http://www.slackware.at/data/slackware-$VERSION #ROOT=ftp://ftp.planetmirror.com/pub/slackware/slackware-$VERSION #ROOT=http://ftp.planetmirror.com/pub/slackware/slackware-$VERSION #ROOT=rsync://rsync.slackware.no/slackware/slackware-$VERSION #ROOT=rsync://rsync.slackware.at/slackware/slackware-$VERSION #ROOT=file:/pub/slackware #ROOT=file:/mnt/nfsshare/slackware #ROOT=file:/mnt/sambashare/slackware ROOT=ftp://ftp.linux.cz/pub/linux/slackware/slackware-12.0 ROOT=ftp://ftp.sh.cvut.cz/MIRRORS/slackware/slackware-12.0 # # ----------------------------------------------------------- # Define Repository URL's with Slackware Linux Packages. # (Used for Repository Slackware Linux Packages) # (Repository URL's available at http://swaret.sourceforge.net and # at http://www.linuxpackages.net/mirrors.php) # # NOTE 1: To use a Local Repository or Remote Repository, # be sure it contains the following Files: # - CHECKSUMS.md5 (For MD5 Sum, REQUIRED) # - FILELIST.TXT (For Package Name + Size, REQUIRED) # - PACKAGES.TXT (For Package Description, NOT REQUIRED) # - MANIFEST.bz2 (For Dependency Support, NOT REQUIRED) # NOTE 2: To create your own Repository, use 'swaret-tools'. # You can get 'swaret-tools' at http://swaret.sourceforge.net! # # Syntax: REPOS_ROOT=REPOSITORYNAME%PROTOCOL:URL # # NOTE 1: The REPOSITORY NAME can only be ONE Keyword! # NOTE 2: swaret will use the order of the specified REPOS_ROOT URL's. # #REPOS_ROOT=LinuxPackagesDOTNET%http://www2.linuxpackages.net/packages/Slackware-10.0 # #REPOS_ROOT=My_Slackware_Packages_On_CD-ROM%file:/mnt/cdrom #REPOS_ROOT=My_Slackware_Packages_On_DVD-ROM%file:/mnt/dvdrom #REPOS_ROOT=My_Slackware_Packages_On_USB_Memory_Stick%file:/mnt/usbmemstick #REPOS_ROOT=SomeRemoteRepository%ftp://ftp.someremoterepository.net/slackware/slackware-10.0 #REPOS_ROOT=SomeRemoteRepository%http://www.someremoterepository.net/slackware/slackware-10.0 #REPOS_ROOT=SomeRemoteRepository%rsync://rsync.someremoterepository.net/slackware/slackware-10.0 #REPOS_ROOT=SzombathelyLinuxAssociation%ftp://ftp.slackware.hu/linuxpackages/Slackware-12.0 REPOS_ROOT=Scarlet.be%ftp://ftp.scarlet.be/pub/linuxpackages/Slackware-12.0 #REPOS_ROOT=Inode.at%ftp://linuxpackages.inode.at/Slackware-12.0 #REPOS_ROOT=Linux-de.org%ftp://ftp.de-mirror.org/linuxpackages/Slackware-12.0 # # ------------------------------------------------------------ # Define Libraries (8.1 or Higher or Current) List Mirrors. # (Used for Dependency Support) # # NOTE 1: You need to specify a Libraries List Mirror which # contains a 'libraries-VERSION' File. # # NOTE 2: To create the Libraries List, use 'swaret-tools'. # You can get 'swaret-tools' at http://swaret.sourceforge.net! # You can also clear all DEP_ROOT Variable(s) which will # allow swaret to create the Libraries List for you # during Dependency Check using the defined ROOT Variable(s) above. # # Syntax: DEP_ROOT=PROTOCOL:URL # # NOTE: swaret will use the order of the specified DEP_ROOT URL's. # DEP_ROOT=http://swaret.sourceforge.net #DEP_ROOT=file:/mnt/cdrom #DEP_ROOT=file:/mnt/dvdrom #DEP_ROOT=file:/mnt/usbmemstick #DEP_ROOT=file:/pub/swaret #DEP_ROOT=file:/mnt/nfsshare/swaret #DEP_ROOT=file:/mnt/sambashare/swaret # # ---------------------------------------------------------- # General Settings # # Do you want swaret to use Random Slackware Linux Mirrors? # -> 1 for yes, 0 for no. # RANDOMR=1 # # Do you want swaret to back-up your packages when upgradeing? # -> If set to 1, old packages are backed up in $CACH_DIR/rollback. # Normally this is /var/swaret/rollback. ROLLBACKMAX is the number # of "upgrades" that will be backed up before old backups will be # removed. Turning on rollback means upgrading packages takes # longer, but it is more safe. # -> If set to 0, swaret will not back up packages. # ROLLBACK=1 ROLLBACKMAX=3 # # Do you want swaret to parse all the Package Descriptions? # -> If set to 1, swaret will also match Packages whose Description # is matching the Keyword(s) you specify after --ACTION. # NOTE: swaret will parse all the Package Descriptions for this, # and might slow down swaret when using an older System. # -> If set to 0, swaret will not use Package Descriptions # to match one or more Packages. # USEPKGDESC=0 # # If you don't want swaret to Upgrade, Install, Re-Install, Download,... # some Packages, add the KEYWORDS to the EXCLUDE Variable. # To disable Exclude Method: swaret --exclude -off # To enable Exclude Method: swaret --exclude -on # # NOTE: You can add ANY EXTENDED REGEXP (Regular Expression) to the EXCLUDE Variable(s) # # Basic Exclude #EXCLUDE=kernel alsa lilo EXCLUDE=swaret #EXCLUDE=aaa_ #EXCLUDE=MANIFEST.bz2$ #EXCLUDE=.*dl$ .*PACKAGER$ .*MYBUILD$ # # Advanced Exclude # Syntax: KEYWORD[DONT_EXCLUDE_ME_KEYWORD1,DONT_EXCLUDE_ME_KEYWORD2,...] # Example: kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB] # #EXCLUDE=kde-i18n[nl,en_GB] koffice-i18n[nl,en_GB] # # Do you want to enable Dependency Check? # -> If set to 1, swaret will start the Dependency Check after # every Upgrade, Install and Re-Install Procedure. # -> If set to 0, swaret will not start the Dependency Check # after any Procedure. # DEPENDENCY=0 # # Do you want swaret to Search for missing Libraries (and Fix) # which could be found on your System, but not tracked by ldconfig? # -> 1 for yes, 0 for no. # DSEARCHLIB=0 # # Set to 1, if you want swaret to use the 'slocate' program # to Search for missing Libraries. # (be sure to issue the 'updatedb' Command regularly!) # If DSEARCHM is set to 0, swaret will use # the 'find' program to locate missing Libraries. # -> 1 for yes, 0 for no. # DSEARCHM=0 # # Start MD5 Check after Fetching Packages, Patches and Sources? # -> 1 for yes, 0 for no. # MD5CHECK=1 # # Start GPG Signature Check after Fetching Packages, Patches and Sources? # # NOTE: Check out F.A.Q. (--faq gpg) how to Import a Public GPG Key which # will be used by the GPG Signature Check. # # -> 1 for yes, 0 for no. # GPGCHECK=0 # # Show Description for Packages during # Upgrade, Install, Re-Install,... Procedures? # -> If set to 0, you will not see a Description. # -> If set to 1, you will see a Description. # DESC=1 # # Cache Directory for (Repository) Packages and Sources. # CACHE_DIR=/var/swaret # # Enable Logging? # -> 1 for yes, 0 for no. # LOG=1 # # swaret Log File # LOG_FILE=/var/log/swaret # # Show Warnings? # -> 1 for yes, 0 for no. # WARNINGS=1 # # Show Information? # -> 1 for yes, 0 for no. # INFORMATION=1 # # ------------------------------------------------------------- # Network Settings # # Network Interface # Use this if you have a Network Interface. # NIC=eth1 # # Local Interface # Use this if you do not have a Network Interface. # # For Example (CD-ROM): # You got a Slackware Linux CD-ROM, # mount the CD-ROM to /mnt/cdrom and # set ROOT to 'file:/mnt/cdrom' in /etc/swaret.conf. # Also, set NIC to 'lo' (Local Loop Device). # # NIC=lo # # Progress # If set to 0, swaret will use the '%' Download Interface. # If set to 1, swaret will use the 'size' Download Interface. # If set to 2, swaret will use the 'wget/rsync' Download Interface. # PROGRESS=0 # # Timeout for wget and/or rsync. # -> Number of seconds for Timeout # TIMEOUT=35 # # Retries for wget and/or rsync. # -> Number of Retries # RETRIES=5 # # Behind a Firewall? Using FTP Mirrors? # -> 1 for yes, 0 for no # PASSIVE_FTP=0 # # If you want HTTP or FTP Proxy Support, # uncomment and Setup the following Variable: # # WGET_PROXY=http://IP or HOST:PORT # # If you want RSYNC Proxy Support, # uncomment and Setup the following Variable: # # RSYNC_PROXY=IP or HOST:PORT # ### /etc/swaret.conf - SWARET EXAMPLE CONFIGURATION FILE ###
Tiskni
Sdílej:
12.10.2007 21:42
David Watzke | skóre: 74
| blog: Blog...
| Praha
swaret.conf? To zní jako předchůdce make.conf...
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.