Portál AbcLinuxu, 31. května 2025 23:53
System ----------------------- K3b Version: 0.12 KDE Version: 3.4.2 Level "b" QT Version: 3.3.4 Kernel: 2.6.13-15.12-default Devices ----------------------- BENQ DVD DD DW1620 B7V9 (/dev/hdc, ) at /media/dvdrecorder [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R sekvenční; DVD-RW sekvenční; DVD+RW; DVD+R; DVD+R dvojitá vrstva; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R; Omezené přepisování] TEAC DV-516G F4S3 (/dev/hdd, ) at /media/dvd [CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM] [Nic] Used versions ----------------------- cdrecord: 2.1 cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -tao driveropts=burnfree -eject blank=fast -force cdrecord ----------------------- /usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 3 Capabilities : Vendor_info : 'BENQ ' Identifikation : 'DVD DD DW1620 ' Revision : 'B7V9' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x002B Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R Drive buf size : 1073152 = 1048 KB Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 112349 (24:59/74) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12) power mult factor: 7 5 recommended erase/write power: 3 A1 values: 02 7A B0 A2 values: 5C F8 36 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Waiting for drive to calm down. Starting to write CD/DVD at speed 4 in real force BLANK mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. /usr/bin/cdrecord: Success. blank unit: scsi sendcmd: no error CDB: A1 01 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 72 01 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x72 Qual 0x01 (session fixation error writing lead-in) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 15.084s timeout 9600s Starting to write CD/DVD at speed 4 in real force BLANK mode for single session. No chance to quit anymore. Operation starts. Performing OPC... Blanking PMA, TOC, pregap /usr/bin/cdrecord: Success. blank unit: scsi sendcmd: no error CDB: A1 01 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 57 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x57 Qual 0x00 (unable to recover table-of-contents) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 9600s /usr/bin/cdrecord: Cannot blank disk, aborting. /usr/bin/cdrecord: Some drives do not support all blank types. /usr/bin/cdrecord: Try again with cdrecord blank=all.
12.10.2006 17:16
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
/usr/bin/cdrecord: Some drives do not support all blank types. /usr/bin/cdrecord: Try again with cdrecord blank=all.Takže zkus zadat:
/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -tao driveropts=burnfree -eject blank=fast -forceNebo v k3b si nastav typ smazání místo "rychlé" na "úplné".
12.10.2006 17:17
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -tao driveropts=burnfree -eject blank=all -force
12.10.2006 17:23
Pavel V. | skóre: 22
| Pardubice
Vsechna jina media cd-rw vymazu pouze 8cm ne, ale tusim ze to slo ani blank=all nepomaha.
12.10.2006 20:19
Pavel Stárek | skóre: 44
| blog: Tady bloguju já :-)
| Kolín
To se omlouvám.
13.10.2006 08:18
Pavel V. | skóre: 22
| Pardubice
cdrecord -v dev=/dev/cdrom blank=all
A jestli tohle nezabere tak je to medium asi potencionalne v kosi
13.10.2006 09:03
Pavel V. | skóre: 22
| Pardubice
28.12.2006 16:58
otasomil | skóre: 39
| blog: puppylinux
22.9.2008 15:19
Pavel V. | skóre: 22
| Pardubice
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.
