Porouchané OpenGL

Omlouvám se za ten název ale fakt mně nic trefnějšího nenapadlo.

Ale k věci problém je v tom že někdy v průběhu vánoc jsem si asi nečím něco porouchal protože teďka když se pokusím spustit cokoliv co potřebuje OpenGL tak dostanu chybové hlášení. např Blender - dřív fungoval v pohodě ale teďka...


fox@Foxuv:~$ blender
Using Python version 2.4
X Error of failed request:  BadAlloc (insufficient resources for operation)
  Major opcode of failed request:  148 (GLX)
  Minor opcode of failed request:  3 (X_GLXCreateContext)
  Serial number of failed request:  22
  Current serial number in output stream:  23

Nebo glxinfo


fox@Foxuv:~$ glxinfo
name of display: :0.0
X Error of failed request:  BadAlloc (insufficient resources for operation)
  Major opcode of failed request:  148 (GLX)
  Minor opcode of failed request:  3 (X_GLXCreateContext)
  Serial number of failed request:  16
  Current serial number in output stream:  17

Používám 64bit UBUNTU 6,06 Grafika N-vidia Geforce 5500 FX POkud z počítače vyhodím drivery pro grafiku (nvidia-glx) tak to tu chybu háže stejně což předtím když sem drivery neěl nedělalo. Blender akorát suše oznáml že nemůže vytvořit okno.

Porsím vás - jestli jenom tušíte co má nasvědomí tuto hlášku tak mně tady nechte vzkaz a já to skusím přeinstalovat. reinstall systému beru fakt jako poslední možnost když to bude beznadějné.
Za kždý postřeh budu vděčný.

No možná vám pomůže obsah xorg.conf


# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder26)  Mon Oct 16 22:13:48 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "cz"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 51.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV34 [GeForce FX 5500]"
    Driver         "nvidia"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV34 [GeForce FX 5500]"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Dotaz: Porouchané OpenGL

Odpovědi