Portál AbcLinuxu, 5. listopadu 2025 12:30
[ 891.721684] res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 891.726233] ata1.00: status: { DRDY }
[ 891.728495] ata1.00: failed command: WRITE FPDMA QUEUED
[ 891.730745] ata1.00: cmd 61/80:78:00:5a:38/00:00:00:00:00/40 tag 15 ncq 65536 out
[ 891.730747] res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 891.735290] ata1.00: status: { DRDY }
[ 891.737526] ata1: hard resetting link
[ 892.336019] ata1: SATA link up unknown (SStatus 103 SControl 310)
[ 892.336971] ata1.00: configured for UDMA/133
[ 892.336991] ata1: EH complete
[ 895.032839] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x400000 action 0x6 frozen
[ 895.033296] ata1.00: irq_stat 0x08000000, interface fatal error
[ 895.035291] ata1: SError: { Handshk }
[ 895.037539] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.039776] ata1.00: cmd 61/00:00:80:0b:39/01:00:00:00:00/40 tag 0 ncq 131072 out
[ 895.039778] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.044340] ata1.00: status: { DRDY }
[ 895.046562] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.048835] ata1.00: cmd 61/80:08:80:0c:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[ 895.048837] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.053363] ata1.00: status: { DRDY }
[ 895.055598] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.057873] ata1.00: cmd 61/00:10:00:03:39/04:00:00:00:00/40 tag 2 ncq 524288 out
[ 895.057874] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.062434] ata1.00: status: { DRDY }
[ 895.064663] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.066912] ata1.00: cmd 61/00:18:00:07:39/03:00:00:00:00/40 tag 3 ncq 393216 out
[ 895.066914] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.071451] ata1.00: status: { DRDY }
[ 895.073697] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.075953] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[ 895.075954] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.080508] ata1.00: status: { DRDY }
[ 895.082751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.085005] ata1.00: cmd 61/80:28:00:0e:39/00:00:00:00:00/40 tag 5 ncq 65536 out
[ 895.085006] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.089548] ata1.00: status: { DRDY }
[ 895.091772] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.094042] ata1.00: cmd 61/80:30:80:0a:39/00:00:00:00:00/40 tag 6 ncq 65536 out
[ 895.094044] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.098589] ata1.00: status: { DRDY }
[ 895.100828] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.103062] ata1.00: cmd 61/80:38:00:0b:39/00:00:00:00:00/40 tag 7 ncq 65536 out
[ 895.103063] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.107626] ata1.00: status: { DRDY }
[ 895.109864] ata1.00: failed command: WRITE FPDMA QUEUED
[ 895.112123] ata1.00: cmd 61/00:40:00:0d:39/01:00:00:00:00/40 tag 8 ncq 131072 out
[ 895.112125] res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 895.116668] ata1.00: status: { DRDY }
[ 895.118903] ata1: hard resetting link
[ 895.600024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 900.600021] ata1.00: qc timeout (cmd 0xec)
[ 900.600027] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 900.600030] ata1.00: revalidation failed (errno=-5)
[ 900.600476] ata1: hard resetting link
[ 901.084017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 911.084017] ata1.00: qc timeout (cmd 0xec)
[ 911.084023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 911.084026] ata1.00: revalidation failed (errno=-5)
[ 911.084476] ata1: hard resetting link
[ 911.568016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 911.568993] ata1.00: configured for UDMA/133
[ 911.569008] ata1: EH complete
[ 911.569045] ata1.00: exception Emask 0x10 SAct 0x3f SErr 0x1800000 action 0x6 frozen
[ 911.569490] ata1.00: irq_stat 0x08000000, interface fatal error
[ 911.571392] ata1: SError: { LinkSeq TrStaTrns }
[ 911.573627] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.575839] ata1.00: cmd 61/00:00:00:0d:39/01:00:00:00:00/40 tag 0 ncq 131072 out
[ 911.575840] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.580317] ata1.00: status: { DRDY }
[ 911.582524] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.584756] ata1.00: cmd 61/80:08:00:0b:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[ 911.584757] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.589205] ata1.00: status: { DRDY }
[ 911.591407] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.593628] ata1.00: cmd 61/80:10:80:0a:39/00:00:00:00:00/40 tag 2 ncq 65536 out
[ 911.593629] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.598087] ata1.00: status: { DRDY }
[ 911.600301] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.602504] ata1.00: cmd 61/80:18:00:0e:39/00:00:00:00:00/40 tag 3 ncq 65536 out
[ 911.602505] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.606969] ata1.00: status: { DRDY }
[ 911.609157] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.611365] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[ 911.611366] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.615820] ata1.00: status: { DRDY }
[ 911.618022] ata1.00: failed command: WRITE FPDMA QUEUED
[ 911.620212] ata1.00: cmd 61/00:28:00:07:39/03:00:00:00:00/40 tag 5 ncq 393216 out
[ 911.620214] res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 911.624627] ata1.00: status: { DRDY }
[ 911.626818] ata1: hard resetting link
[ 912.108019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 917.108019] ata1.00: qc timeout (cmd 0xec)
[ 917.108025] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 917.108028] ata1.00: revalidation failed (errno=-5)
[ 917.108471] ata1: hard resetting link
[ 917.592019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 917.593025] ata1.00: configured for UDMA/133
[ 917.593042] ata1: EH complete
[ 917.593127] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x1c00000 action 0x6 frozen
[ 917.593568] ata1.00: irq_stat 0x08000000, interface fatal error
[ 917.595445] ata1: SError: { Handshk LinkSeq TrStaTrns }
[ 917.597655] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.599852] ata1.00: cmd 61/00:00:00:07:39/03:00:00:00:00/40 tag 0 ncq 393216 out
[ 917.599853] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.604265] ata1.00: status: { DRDY }
[ 917.606454] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.608665] ata1.00: cmd 61/80:08:00:0a:39/00:00:00:00:00/40 tag 1 ncq 65536 out
[ 917.608667] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.613086] ata1.00: status: { DRDY }
[ 917.615274] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.617489] ata1.00: cmd 61/80:10:00:0e:39/00:00:00:00:00/40 tag 2 ncq 65536 out
[ 917.617490] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.621895] ata1.00: status: { DRDY }
[ 917.624105] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.626290] ata1.00: cmd 61/80:18:80:0a:39/00:00:00:00:00/40 tag 3 ncq 65536 out
[ 917.626292] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.630722] ata1.00: status: { DRDY }
[ 917.632948] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.635118] ata1.00: cmd 61/80:20:00:0b:39/00:00:00:00:00/40 tag 4 ncq 65536 out
[ 917.635120] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.639537] ata1.00: status: { DRDY }
[ 917.641716] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.643913] ata1.00: cmd 61/00:28:00:0d:39/01:00:00:00:00/40 tag 5 ncq 131072 out
[ 917.643915] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.648336] ata1.00: status: { DRDY }
[ 917.650517] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.652735] ata1.00: cmd 61/00:30:00:03:39/04:00:00:00:00/40 tag 6 ncq 524288 out
[ 917.652737] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.657140] ata1.00: status: { DRDY }
[ 917.659315] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.661532] ata1.00: cmd 61/80:38:80:0c:39/00:00:00:00:00/40 tag 7 ncq 65536 out
[ 917.661533] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.665959] ata1.00: status: { DRDY }
[ 917.668179] ata1.00: failed command: WRITE FPDMA QUEUED
[ 917.670392] ata1.00: cmd 61/00:40:80:0b:39/01:00:00:00:00/40 tag 8 ncq 131072 out
[ 917.670394] res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 917.674850] ata1.00: status: { DRDY }
[ 917.677075] ata1: hard resetting link
[ 918.160018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 918.160532] ata1.00: failed to set xfermode (err_mask=0x100)
[ 923.160018] ata1: hard resetting link
[ 923.644018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 928.644017] ata1.00: qc timeout (cmd 0xec)
[ 928.644023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 928.644026] ata1.00: revalidation failed (errno=-5)
[ 928.644464] ata1: hard resetting link
[ 929.128014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 939.128017] ata1.00: qc timeout (cmd 0xec)
[ 939.128023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 939.128026] ata1.00: revalidation failed (errno=-5)
[ 939.128457] ata1.00: disabled
[ 939.128478] ata1: hard resetting link
[ 939.612016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 939.612032] ata1: EH complete
[ 939.612053] sd 0:0:0:0: [sda] Unhandled error code
[ 939.612055] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.612058] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 80 00 01 00 00
[ 939.612066] end_request: I/O error, dev sda, sector 3738496
[ 939.612472] raid1: Disk failure on sda2, disabling device.
[ 939.612474] raid1: Operation continuing on 1 devices.
[ 939.616545] sd 0:0:0:0: [sda] Unhandled error code
[ 939.616547] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.616550] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0c 80 00 00 80 00
[ 939.616557] end_request: I/O error, dev sda, sector 3738752
[ 939.618691] sd 0:0:0:0: [sda] Unhandled error code
[ 939.618693] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.618696] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 03 00 00 04 00 00
[ 939.618703] end_request: I/O error, dev sda, sector 3736320
[ 939.620892] sd 0:0:0:0: [sda] Unhandled error code
[ 939.620894] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.620897] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0d 00 00 01 00 00
[ 939.620904] end_request: I/O error, dev sda, sector 3738880
[ 939.622856] sd 0:0:0:0: [sda] Unhandled error code
[ 939.622859] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.622862] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 00 00 00 80 00
[ 939.622868] end_request: I/O error, dev sda, sector 3738368
[ 939.624949] sd 0:0:0:0: [sda] Unhandled error code
[ 939.624951] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.624954] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 80 00 00 80 00
[ 939.624961] end_request: I/O error, dev sda, sector 3738240
[ 939.626995] sd 0:0:0:0: [sda] Unhandled error code
[ 939.626997] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.627000] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 00 00 00 80 00
[ 939.627007] end_request: I/O error, dev sda, sector 3739136
[ 939.629048] sd 0:0:0:0: [sda] Unhandled error code
[ 939.629050] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.629053] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 00 00 00 80 00
[ 939.629059] end_request: I/O error, dev sda, sector 3738112
[ 939.631057] sd 0:0:0:0: [sda] Unhandled error code
[ 939.631059] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.631062] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 07 00 00 03 00 00
[ 939.631068] end_request: I/O error, dev sda, sector 3737344
[ 939.633079] sd 0:0:0:0: [sda] Unhandled error code
[ 939.633081] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.633084] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 80 00 04 00 00
[ 939.633091] end_request: I/O error, dev sda, sector 3739264
[ 939.635040] sd 0:0:0:0: [sda] Unhandled error code
[ 939.635042] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.635045] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 e8 da 7d 00 00 00 08 00
[ 939.635052] end_request: I/O error, dev sda, sector 3906632960
[ 939.636914] end_request: I/O error, dev sda, sector 3906632960
[ 939.638793] md: super_written gets error=-5, uptodate=0
[ 939.639088] md: md1: recovery done.
[ 939.639523] sd 0:0:0:0: [sda] READ CAPACITY(16) failed
[ 939.639526] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.639529] sd 0:0:0:0: [sda] Sense not available.
[ 939.639551] sd 0:0:0:0: [sda] READ CAPACITY failed
[ 939.639553] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 939.639556] sd 0:0:0:0: [sda] Sense not available.
[ 939.639587] sd 0:0:0:0: [sda] Asking for cache data failed
[ 939.640681] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 939.642601] sda: detected capacity change from 2000398934016 to 0
[ 939.870509] RAID1 conf printout:
[ 939.870513] --- wd:1 rd:2
[ 939.870517] disk 0, wo:1, o:0, dev:sda2
[ 939.870520] disk 1, wo:0, o:1, dev:sdb2
[ 939.870522] RAID1 conf printout:
[ 939.870523] --- wd:1 rd:2
[ 939.870525] disk 1, wo:0, o:1, dev:sdb2
[ 1178.273762] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.285951] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.285992] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1178.286005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132096] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1238.132150] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354097] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354137] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1298.354148] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277466] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277491] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277506] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1598.277517] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1829.752018] [drm] nouveau 0000:00:12.0: Setting dpms mode 1 on vga encoder (output 0)
[ 1897.954560] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954585] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954600] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 1897.954612] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089163] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089178] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 2198.089190] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Je problem opravdu s diskem nebo to muze byt deskou (radicem)? Ale na te same mam puvodni Seagate a ten jede /zatim/ v pohode. Mam ho reklamovat?
Diky moc.
smartctl -d sat -a /dev/sda
vypise co? Je mozne, ze pro provedeni toho prikazu muze byt potreba nejprve masinu restartovat, aby se disk opet chytil.
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M0120830
Firmware Version: 80.00A80
User Capacity: 2 000 398 934 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Oct 15 10:38:24 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (27720) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 113
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 110 103 000 Old_age Always - 37
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
15.10.2013 10:39
Luboš Doležel (Doli) | skóre: 98
| blog: Doliho blog
| Kladensko
Ale jak říkám, zajímavé je, že ty 3 dny to jelo bez sebemenších problémů. Synchronizace RAIDu atd.. Ale stát se může cokoliv.
Díky, dám vědět, jak jsem dopadl.
15.10.2013 11:45
Josef Kufner | skóre: 70
15.10.2013 11:54
Josef Kufner | skóre: 70
15.10.2013 15:03
Josef Kufner | skóre: 70
né všechny konektory a pružinky jsou pozlacené!
A i pozlacený kontakt může blbnout - nemusí mít dobrý přítlak - únava pružiny.
A taky se láme kabel u průchodky z konektoru
17.10.2013 00:46
Josef Kufner | skóre: 70
smartctl -d sat -a /dev/sdapo tech vymenach by byl k dispozici?
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD20EFRX-68EUZN0
Serial Number: WD-WCC4M0120830
Firmware Version: 80.00A80
User Capacity: 2 000 398 934 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 17 21:46:53 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (27720) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x703d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 174 174 021 Pre-fail Always - 4266
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 168
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 6
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 3
194 Temperature_Celsius 0x0022 116 103 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 118 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute dela
> smartctl -d sat -a /dev/sda
smartctl 5.42 2011-10-20 r3458 [armv5tel-linux-2.6.32.12] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: WDC WD30EFRX-68AX9N0
Serial Number: WD-XXXXXXXXXXX
LU WWN Device Id: 5 0014ee 058c81985
Firmware Version: 80.00A80
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 (revision not indicated)
Local Time is: Thu Oct 17 21:53:53 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (40980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 6041
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2295
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5202
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1214
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 19
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2275
194 Temperature_Celsius 0x0022 108 103 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 5197 -
# 2 Short offline Completed without error 00% 5187 -
# 3 Short offline Completed without error 00% 5180 -
# 4 Extended offline Completed without error 00% 5173 -
# 5 Short offline Completed without error 00% 5151 -
# 6 Short offline Completed without error 00% 5137 -
# 7 Short offline Completed without error 00% 5127 -
# 8 Short offline Completed without error 00% 5118 -
# 9 Short offline Completed without error 00% 5112 -
#10 Short offline Completed without error 00% 5107 -
#11 Extended offline Completed without error 00% 5103 -
#12 Short offline Completed without error 00% 5088 -
#13 Short offline Completed without error 00% 5082 -
#14 Short offline Completed without error 00% 5072 -
#15 Short offline Completed without error 00% 5044 -
#16 Short offline Completed without error 00% 5022 -
#17 Short offline Completed without error 00% 4995 -
#18 Extended offline Completed without error 00% 4977 -
#19 Short offline Completed without error 00% 4947 -
#20 Short offline Completed without error 00% 4928 -
#21 Short offline Completed without error 00% 4921 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.