Portál AbcLinuxu, 26. dubna 2024 19:22
cdrecord -scanbus
mi vypalovacku spravne nahlasi. Jakmile ale udelam pokus o zapis (vypaleni dat,audioCD, nebo jen vymazani RWcka), tak vypalovacka prestane pracovat, cdrecord tvrdi ze pali, ale progressbar nikam nejede, proste cas bezi a nic se nedeje, vypalovacka ani netoci CDcek a nesviti LEDkou. Akorat /sbin/famd
si najednou bere 100% CPU.
Kdyz prerusim vypalovani a zadam opet cdrecord -scanbus, cdrecord zatuhne ve fazi:
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
scsibus0:
Jinak mechanika dale bez problemu mountuje a cte. Proste jen nezapisuje. Ve windows jsem to jeste nevyzkousel, protoze ty pro zmenu zacaly samy od sebe restartovat pocitac okamzite jakmile je vyberu v LILO.
Zkusim jeste co na to rekne Slax ci Danix.
19:56:10: hdd: SONY CD-RW CRX175E, ATAPI CD/DVD-ROM drive
...
19:56:10: SCSI subsystem driver Revision: 1.00
...
00:40:30: ide-cd: ignoring drive hdd
00:40:30: hdd: attached ide-scsi driver.
00:40:30: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
00:40:30: Vendor: SONY Model: CD-RW CRX175E Rev: 1.0j
00:40:30: Type: CD-ROM ANSI SCSI revision: 02
00:40:30: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
00:40:30: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
00:40:30: Uniform CD-ROM driver Revision: 3.12
00:40:34: ISO 9660 Extensions: Microsoft Joliet Level 3
00:40:34: ISOFS: changing to secondary root
...
00:57:43: scsi : aborting command due to timeout : pid 11873, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
00:57:43: hdd: lost interrupt
00:57:43: ide-scsi: The scsi wants to send us more data than expected - discarding data
00:57:43: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
00:57:43: ]
00:57:43: ide-scsi: expected 64512 got 129020 limit 64512
00:58:23: scsi : aborting command due to timeout : pid 11874, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
00:58:23: hdd: lost interrupt
00:58:23: ide-scsi: The scsi wants to send us more data than expected - discarding data
00:58:23: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
00:58:23: ]
00:58:23: ide-scsi: expected 64512 got 129020 limit 64512
00:59:03: scsi : aborting command due to timeout : pid 11876, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
00:59:03: scsi : aborting command due to timeout : pid 11877, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
00:59:03: hdd: lost interrupt
00:59:03: ide-scsi: The scsi wants to send us more data than expected - discarding data
00:59:03: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
00:59:03: ]
00:59:03: ide-scsi: expected 64512 got 129020 limit 64512
00:59:03: hdd: irq timeout: status=0xd0 { Busy }
00:59:03: hdd: DMA disabled
00:59:03: hdd: ATAPI reset complete
...
01:07:18: scsi : aborting command due to timeout : pid 12041, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
01:07:18: hdd: lost interrupt
01:07:18: ide-scsi: The scsi wants to send us more data than expected - discarding data
01:07:18: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
01:07:18: ]
01:07:18: ide-scsi: expected 64512 got 129020 limit 64512
01:10:38: scsi : aborting command due to timeout : pid 12042, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
01:10:38: hdd: lost interrupt
01:10:38: ide-scsi: The scsi wants to send us more data than expected - discarding data
01:10:38: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
01:10:38: ]
01:10:38: ide-scsi: expected 64512 got 129020 limit 64512
01:11:12: scsi : aborting command due to timeout : pid 12044, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
01:11:22: scsi : aborting command due to timeout : pid 12044, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
01:11:22: SCSI host 0 abort (pid 12044) timed out - resetting
01:11:22: SCSI bus is being reset for host 0 channel 0.
01:11:22: SCSI host 0 channel 0 reset (pid 12044) timed out - trying harder
01:11:22: SCSI bus is being reset for host 0 channel 0.
01:12:32: scsi : aborting command due to timeout : pid 12045, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
01:13:12: scsi : aborting command due to timeout : pid 12045, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00
01:13:12: SCSI host 0 abort (pid 12045) timed out - resetting
01:13:12: SCSI bus is being reset for host 0 channel 0.
01:13:12: SCSI host 0 channel 0 reset (pid 12045) timed out - trying harder
01:13:12: SCSI bus is being reset for host 0 channel 0.
01:13:58: scsi : aborting command due to timeout : pid 12043, scsi0, channel 0, id 0, lun 0 Read Buffer 00 00 00 00 00 00 fc 00 00
01:13:58: hdd: lost interrupt
01:13:58: ide-scsi: The scsi wants to send us more data than expected - discarding data
01:13:58: ide-scsi: [[ 3c 0 0 0 0 0 0 fc 0 0 0 0 ]
01:13:58: ]
01:13:58: ide-scsi: expected 64512 got 129020 limit 64512
01:13:58: hdd: irq timeout: status=0xd0 { Busy }
01:13:58: hdd: ATAPI reset complete
01:16:03: ISO 9660 Extensions: Microsoft Joliet Level 3
01:16:03: ISOFS: changing to secondary root
cdrecord_2.0+a18-1_i386.deb
)u sebe na stazeni do doby, nez se objevi novejsi, funkcni verze.
Dekuji timto Ottovi za pomoc.
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.