Portál AbcLinuxu, 13. května 2025 18:31

Dotaz: problém s k3b 1.0.1

12.5.2007 20:01 anonymous | skóre: 3
problém s k3b 1.0.1
Přečteno: 604×
Odpovědět | Admin
Ahoj lidi, dnes jsem si nainstaloval nové k3b 1.0.1 a hned po spuštění mě uvítají tyto dvě hlášky. Distribuce je Ubuntu 7.04.

Jestli jsem to dobře pochopil tak mám spustit k3b jako root, kvůli konfiguraci a pak už ho spouštět jen pod normálním uživatelem? Snad tomu dobře rozumím mohl by jste mě to někdo případně dovysvětlit ;-) Systems Configuration Problems 1 problem.

cdrecord will be run without root privileges It is highly recommended to configure cdrecord to run with root privileges. Only then cdrecord runs with high priority which increases the overall stability of the burning process. Apart from that it allows changing the size of the used burning buffer. A lot of user problems could be solved this way. This is also true when using SuSE's resmgr.

Running K3b as root user It is not recommended to run K3b under the root user account. This introduces unnecessary security risks. Solution: Run K3b from a proper user account and setup the device and external tool permissions appropriately. Předem díky za odpovědi :-)
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

Dalibor Smolík avatar 12.5.2007 20:16 Dalibor Smolík | skóre: 54 | blog: Postrehy_ze_zivota | 50°5'31.93"N,14°19'35.51"E
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Odpovědět | | Sbalit | Link | Blokovat | Admin
spustit v konzoli sudo k3b
Rozdíly v řeči a ve zvyklostech neznamenají vůbec nic, budeme-li mít stejné cíle a otevřená srdce.
Prcek avatar 12.5.2007 20:28 Prcek | skóre: 43 | Jindřichův Hradec / Brno
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Odpovědět | | Sbalit | Link | Blokovat | Admin
Nevim jestli je to stejna hlaska, ale taky se mi pri prvnim spusteni k3b zobrazilo neco o pravech, jako reseni bylo nabidnuto spustit k3b setup (primo v tom okne bylo tlacitko ke spusteni, ale myslim ze spustit jde i primo z programu), objevilo se okno, stacilo kliknout na OK (prava pro cdrecord byla uz nastavena spravne) a bylo hotovo.
Člověk je takový, jak vypadá... A já vypadám jako pravá, nefalšovaná děvka!!!
regnarg avatar 12.5.2007 20:32 regnarg | skóre: 20 | blog: rm -rf /this/blog
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Možná by stačilo pod rootem spustit přímo příkaz k3bsetup...
S láskou se nerodíme, ale s láskou se stáváme lidmi. --Simone De Beauvoirová
Prcek avatar 12.5.2007 20:37 Prcek | skóre: 43 | Jindřichův Hradec / Brno
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Zrejme ano, protoze to po mne stejne chtelo heslo, takze se to spoustelo pres sudo.
Člověk je takový, jak vypadá... A já vypadám jako pravá, nefalšovaná děvka!!!
12.5.2007 21:30 anonymous | skóre: 3
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
zkoušel jsem všechny zmíněné rady, ale hláška se objevuje pořád a nepřišel jsem na to kde ta práva změnit. Tady je log s konzole: 
martin@linux-desktop:~$ sudo k3b
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
ERROR: Communication problem with k3b, it probably crashed.
martin@linux-desktop:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_ASUS_CRW_5224A to device /dev/hdc
Mapping udi /org/freedesktop/Hal/devices/storage_model__NEC_DVD_RW_ND_4550A to device /dev/hdb
/dev/hdc resolved to /dev/hdc
/dev/hdc is block device (0)
/dev/hdc seems to be cdrom
(K3bDevice::Device) /dev/hdc: init()
(K3bDevice::Device) /dev/hdc feature: CD Mastering
(K3bDevice::Device) /dev/hdc feature: CD Track At Once
(K3bDevice::Device) /dev/hdc unknown profile: 2
(K3bDevice::Device) /dev/hdc: dataLen: 60
(K3bDevice::Device) /dev/hdc: checking for TAO
(K3bDevice::Device) /dev/hdc: checking for SAO
(K3bDevice::Device) /dev/hdc: checking for SAO_R96P
(K3bDevice::Device) /dev/hdc: checking for SAO_R96R
(K3bDevice::Device) /dev/hdc: checking for RAW_R16
(K3bDevice::Device) /dev/hdc: checking for RAW_R96P
(K3bDevice::Device) /dev/hdc: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed: 
                           command:    GET PERFORMANCE (ac)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       1
(K3bDevice::Device) /dev/hdc: GET PERFORMANCE length det failed.
(K3bDevice::ScsiCommand) failed: 
                           command:    GET PERFORMANCE (ac)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       1
(K3bDevice::Device) /dev/hdc: GET PERFORMANCE with real length 2048 failed.
(K3bDevice::Device) /dev/hdc:  Number of supported write speeds via 2A: 0
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdc to 0
/dev/hdb resolved to /dev/hdb
/dev/hdb is block device (64)
/dev/hdb seems to be cdrom
(K3bDevice::Device) /dev/hdb: init()
(K3bDevice::Device) /dev/hdb feature: CD Mastering
(K3bDevice::Device) /dev/hdb feature: CD Track At Once
(K3bDevice::Device) /dev/hdb feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/hdb feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/hdb feature: DVD+R
(K3bDevice::Device) /dev/hdb feature: DVD+RW
(K3bDevice::Device) /dev/hdb feature: DVD+R Double Layer
(K3bDevice::Device) /dev/hdb feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/hdb feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/hdb unknown profile: 2
(K3bDevice::Device) /dev/hdb: dataLen: 60
(K3bDevice::Device) /dev/hdb: checking for TAO
(K3bDevice::Device) /dev/hdb: checking for SAO
(K3bDevice::Device) /dev/hdb: checking for SAO_R96P
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for SAO_R96R
(K3bDevice::Device) /dev/hdb: checking for RAW_R16
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96P
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96R
(K3bDevice::Device) /dev/hdb:  Number of supported write speeds via GET PERFORMANCE: 6
(K3bDevice::Device) /dev/hdb : 8467 KB/s
(K3bDevice::Device) /dev/hdb : 7056 KB/s
(K3bDevice::Device) /dev/hdb : 5645 KB/s
(K3bDevice::Device) /dev/hdb : 4234 KB/s
(K3bDevice::Device) /dev/hdb : 2822 KB/s
(K3bDevice::Device) /dev/hdb : 1411 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdb to 3324
/dev/hdc resolved to /dev/hdc
(K3bDevice::DeviceManager) dev /dev/hdc already found
/dev/hdb resolved to /dev/hdb
(K3bDevice::DeviceManager) dev /dev/hdb already found
(K3bDevice::DeviceManager) found config entry for devicetype: ASUS CRW-5224A
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DVD_RW ND-4550A
Devices:
------------------------------
Blockdevice:    /dev/hdc
Generic device: 
Vendor:         ASUS
Description:    CRW-5224A
Version:        1.40
Write speed:    0
Profiles:       CD-ROM, CD-R, CD-RW
Read Cap:       CD-ROM, CD-R, CD-RW
Write Cap:      CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R
Reader aliases: /dev/hdc
------------------------------
Blockdevice:    /dev/hdb
Generic device: 
Vendor:         _NEC
Description:    DVD_RW ND-4550A
Version:        1.08
Write speed:    3324
Profiles:       DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/hdb
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.

martin@linux-desktop:~$ sudo k3b setup
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
ERROR: Communication problem with k3b, it probably crashed.
martin@linux-desktop:~$ kdecore (KAction): WARNING: KActionCollection::KActionCollection( QObject *parent, const char *name, KInstance *instance )
(K3bDevice::HalConnection) initializing HAL >= 0.5
Mapping udi /org/freedesktop/Hal/devices/storage_model_ASUS_CRW_5224A to device /dev/hdc
Mapping udi /org/freedesktop/Hal/devices/storage_model__NEC_DVD_RW_ND_4550A to device /dev/hdb
/dev/hdc resolved to /dev/hdc
/dev/hdc is block device (0)
/dev/hdc seems to be cdrom
(K3bDevice::Device) /dev/hdc: init()
(K3bDevice::Device) /dev/hdc feature: CD Mastering
(K3bDevice::Device) /dev/hdc feature: CD Track At Once
(K3bDevice::Device) /dev/hdc unknown profile: 2
(K3bDevice::Device) /dev/hdc: dataLen: 60
(K3bDevice::Device) /dev/hdc: checking for TAO
(K3bDevice::Device) /dev/hdc: checking for SAO
(K3bDevice::Device) /dev/hdc: checking for SAO_R96P
(K3bDevice::Device) /dev/hdc: checking for SAO_R96R
(K3bDevice::Device) /dev/hdc: checking for RAW_R16
(K3bDevice::Device) /dev/hdc: checking for RAW_R96P
(K3bDevice::Device) /dev/hdc: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed: 
                           command:    GET PERFORMANCE (ac)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       1
(K3bDevice::Device) /dev/hdc: GET PERFORMANCE length det failed.
(K3bDevice::ScsiCommand) failed: 
                           command:    GET PERFORMANCE (ac)
                           errorcode:  70
                           sense key:  NOT READY (2)
                           asc:        3a
                           ascq:       1
(K3bDevice::Device) /dev/hdc: GET PERFORMANCE with real length 2048 failed.
(K3bDevice::Device) /dev/hdc:  Number of supported write speeds via 2A: 0
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdc to 0
/dev/hdb resolved to /dev/hdb
/dev/hdb is block device (64)
/dev/hdb seems to be cdrom
(K3bDevice::Device) /dev/hdb: init()
(K3bDevice::Device) /dev/hdb feature: CD Mastering
(K3bDevice::Device) /dev/hdb feature: CD Track At Once
(K3bDevice::Device) /dev/hdb feature: CD-RW Media Write Support
(K3bDevice::Device) /dev/hdb feature: DVD Read (MMC5)
(K3bDevice::Device) /dev/hdb feature: DVD+R
(K3bDevice::Device) /dev/hdb feature: DVD+RW
(K3bDevice::Device) /dev/hdb feature: DVD+R Double Layer
(K3bDevice::Device) /dev/hdb feature: DVD-R/-RW Write
(K3bDevice::Device) /dev/hdb feature: Rigid Restricted Overwrite
(K3bDevice::Device) /dev/hdb unknown profile: 2
(K3bDevice::Device) /dev/hdb: dataLen: 60
(K3bDevice::Device) /dev/hdb: checking for TAO
(K3bDevice::Device) /dev/hdb: checking for SAO
(K3bDevice::Device) /dev/hdb: checking for SAO_R96P
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for SAO_R96R
(K3bDevice::Device) /dev/hdb: checking for RAW_R16
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96P
(K3bDevice::ScsiCommand) failed: 
                           command:    MODE SELECT (55)
                           errorcode:  70
                           sense key:  ILLEGAL REQUEST (5)
                           asc:        26
                           ascq:       0
(K3bDevice::Device) /dev/hdb: checking for RAW_R96R
(K3bDevice::Device) /dev/hdb:  Number of supported write speeds via GET PERFORMANCE: 6
(K3bDevice::Device) /dev/hdb : 8467 KB/s
(K3bDevice::Device) /dev/hdb : 7056 KB/s
(K3bDevice::Device) /dev/hdb : 5645 KB/s
(K3bDevice::Device) /dev/hdb : 4234 KB/s
(K3bDevice::Device) /dev/hdb : 2822 KB/s
(K3bDevice::Device) /dev/hdb : 1411 KB/s
(K3bDevice::DeviceManager) setting current write speed of device /dev/hdb to 3324
/dev/hdc resolved to /dev/hdc
(K3bDevice::DeviceManager) dev /dev/hdc already found
/dev/hdb resolved to /dev/hdb
(K3bDevice::DeviceManager) dev /dev/hdb already found
(K3bDevice::DeviceManager) found config entry for devicetype: ASUS CRW-5224A
(K3bDevice::DeviceManager) found config entry for devicetype: _NEC DVD_RW ND-4550A
Devices:
------------------------------
Blockdevice:    /dev/hdc
Generic device: 
Vendor:         ASUS
Description:    CRW-5224A
Version:        1.40
Write speed:    0
Profiles:       CD-ROM, CD-R, CD-RW
Read Cap:       CD-ROM, CD-R, CD-RW
Write Cap:      CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R
Reader aliases: /dev/hdc
------------------------------
Blockdevice:    /dev/hdb
Generic device: 
Vendor:         _NEC
Description:    DVD_RW ND-4550A
Version:        1.08
Write speed:    3324
Profiles:       DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Read Cap:       DVD-ROM, DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW
Write Cap:      DVD-R, DVD-R Sequential, DVD-R Dual Layer, DVD-R Dual Layer Sequential, DVD-RW, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-R, CD-RW
Writing modes:  SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite
Reader aliases: /dev/hdb
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
martin@linux-desktop:~$ X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  147
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
kbuildsycoca running...
Prcek avatar 12.5.2007 21:38 Prcek | skóre: 43 | Jindřichův Hradec / Brno
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
martin@linux-desktop:~$ sudo k3b setup
ten spousteci soubor se jmenuje k3bsetup (dohromady).
Člověk je takový, jak vypadá... A já vypadám jako pravá, nefalšovaná děvka!!!
12.5.2007 21:43 anonymous | skóre: 3
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Tak u mě ho to teda nezná :-) Instaloval jsem balíčky z http://www.getdeb.net/release.php?id=802 
martin@linux-desktop:~$ k3bsetup
bash: k3bsetup: command not found
martin@linux-desktop:~$ sudo k3bsetup
sudo: k3bsetup: command not found
martin@linux-desktop:~$ k3bsetup
bash: k3bsetup: command not found
martin@linux-desktop:~$ sudo k3bsetup
sudo: k3bsetup: command not found
martin@linux-desktop:~$
Prcek avatar 12.5.2007 22:01 Prcek | skóre: 43 | Jindřichův Hradec / Brno
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
A primo z menu k3b se ten Setup vyvolat neda? Ja mam za to ze jo... (nebo se pres tu chybu ani do k3b nejde dostat?)
Člověk je takový, jak vypadá... A já vypadám jako pravá, nefalšovaná děvka!!!
12.5.2007 22:08 knizmi | skóre: 27 | blog: Blog | Kosmonosy
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
V novejsich verzich jsem ten K3Bsetup taky nenasel. Co takhle proste prislusna prava priradit rovnou wodimu? Viz http://www.abclinuxu.cz/forum/show/175774
12.5.2007 21:38 anonymous | skóre: 3
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
nepomohlo ani smazání konfiguračního souboru k3b :-(
12.5.2007 21:57 knizmi | skóre: 27 | blog: Blog | Kosmonosy
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Odpovědět | | Sbalit | Link | Blokovat | Admin
Nejsem si jisty, jestli Ubuntu pouziva primo cdrecord, spise asi wodim, coz je jeho fork.

K otazce: Resilo se to tady: http://www.abclinuxu.cz/forum/show/175774.

12.5.2007 22:09 anonymous | skóre: 3
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
tak nakonec pomohl tento příkaz. Tak jsem koukal na wodim a ten už tam opravdu je. 
martin@linux-desktop:~$ sudo chmod +s $(which cdrecord)
martin@linux-desktop:~$
Děkuji všem zúčastněným za rady :-)
David Watzke avatar 13.5.2007 00:06 David Watzke | skóre: 74 | blog: Blog... | Praha
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Odpovědět | | Sbalit | Link | Blokovat | Admin
Já vždy po instalaci nové verze (nebo tak) spouštím něco podobnýho tomuhle: 
# chmod 6755 /usr/bin/{cdrecord,wodim,cdda2wav,icedax}
“Being honest may not get you a lot of friends but it’ll always get you the right ones” ―John Lennon
bluemoon avatar 13.5.2007 08:20 bluemoon | skóre: 2 | blog: bluemoon
Rozbalit Rozbalit vše Re: problém s k3b 1.0.1
Odpovědět | | Sbalit | Link | Blokovat | Admin
no tak to se mi objevilo taky, pod rootem jsem jednou nastavil k3b a pak uz to normalne pod uzivateli jelo bez vyptavani, ono to nastaveni, chce pristupy k hardwaru a to by nemeli delat jenom nejaky uzivatele.

Založit nové vlákno • Nahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.