Administrace komentářů

Zdravím. Na svém notebooku bych rád rozchodil tuto kartu... TV Karta AVerMedia AVerTV CardBus Plus Je to karta do PCMCIA slotu. Mám Kubuntu 8.04. Smažil jsem se prohledávat fórum, ale bohužel z popisů zprovoznění karet nejsem moc moudrej.. Sem uživatel začátečník, tak prosím nekamenovat za hloupé dotazy.. Nainstaloval jsem si klikací aplikace TVtime a Kdetv. Karta zama od sebe po zasunutí neběží. Když dám "lscpi" dostanu toto:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01) 02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 02:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection

ovšem v modprobe -l už SAA7133/SAA7135 nenajdu... je tam pouze:

/lib/modules/2.6.24-19-generic/kernel/drivers/media/video/saa7134/saa7134.ko

po "dmesg":

[ 28.254354] saa7133[0]: subsystem: 1461:f436, board: UNKNOWN/GENERIC [card=0,autodetected] [ 28.254363] saa7133[0]: board init: gpio is 220000 [ 28.389621] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00 [ 28.389642] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 28.389661] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff [ 28.389681] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.389701] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [ 28.389721] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.389740] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.389760] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 28.390008] saa7133[0]: dsp access error [ 28.390011] saa7133[0]: dsp access error [ 28.390016] saa7133[0]: dsp access error [ 28.390039] saa7133[0]: registered device video0 [v4l2] [ 28.390060] saa7133[0]: registered device vbi0 [ 28.390069] saa7133[0]: dsp access error [ 28.390072] saa7133[0]: dsp access error [ 28.411009] saa7134 ALSA driver for DMA sound loaded [ 28.411034] saa7133[0]/alsa: saa7133[0] at 0xa4000000 irq 19 registered as card -2 [ 28.570797] lp0: using parport0 (interrupt-driven).

Mužete mě prosím nějak polopaticky popsat jak to zprovoznit..

Moc díky...

Míla