Administrace komentářů

No překvapivě to uplně zabitý není. Zatím se mi povedlo to dostat do stavu, kdy mám na televizi 800x600 výřez LCDčka notebooku. Což je sice hezké, ale v praxi úplně k ničemu.

Navíc, když spustím třeba Kaffeine, tak obraz vidím jen na notebooku, na televizi mám v tom místě jen modrý čtverec.

Na desktopu mám NVidii a tam mám prostě Screen O na monitoru a Screen 1 na televizi ... takhle bych si to představoval i tady, ale jaxi mi to nejde ... xorg.conf následuje:

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.


# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath	"/usr/share/fonts/local"
    FontPath	"/usr/share/fonts/misc"
    FontPath	"/usr/share/fonts/Type1"
    FontPath	"/usr/share/fonts/TTF"
    FontPath	"/usr/share/fonts/75dpi"
    FontPath	"/usr/share/fonts/100dpi"

# The default path is shown here.


EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

	Load	"dri"
	Load	"glx"

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"

EndSection


# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option	"NoTrapSignals"

# Uncomment this to disable the  VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option	"DontVTSwitch"

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

#    Option	"DontZap"

# Uncomment this to disable the  mode switching
# sequences.  This allows clients to receive these key events.

#    Option	"DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option	"DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option	"AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option	"DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option	"AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

    Option	"blank time"	"10"	# 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option	"standby time"	"20"
#    Option	"suspend time"	"30"
#    Option	"off time"	"60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"keyboard"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment
# out the above line, and uncomment the following line.

#    Option	"Protocol"	"Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

    Option	"AutoRepeat"	"500 30"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

    Option	"Xleds"	"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option	"XkbModel"	"pc102"
#    Option	"XkbModel"	"pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option	"XkbModel"	"microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option	"XkbModel"	"pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option	"XkbLayout"	"de"
#
# or:
#
#    Option	"XkbLayout"	"de"
#    Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option	"XkbOptions"	"ctrl:swapcaps"


# These are the default XKB settings for xorg
#
#    Option	"XkbRules"	"xorg"
#    Option	"XkbModel"	"pc101"
#    Option	"XkbLayout"	"us"
#    Option	"XkbVariant"	""
#    Option	"XkbOptions"	""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"




    Option	"Device"	"/dev/psaux"


    Option	"Protocol"	"ImPS/2"



EndSection



# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

# The identifier line must be present.

    Identifier	"Generic Monitor"





EndSection


Section "Monitor"

	Identifier	"TV-monitor"


#    Option "LeftOf"  "Generic Monitor"

    Option  "PreferredMode"  "800x600"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"

# The Identifier must be present.

    Identifier	"ATI Radeon"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver	"radeon"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset	"generic"

# Various other lines can be specified to override the driver's automatic
# detection code.  In most cases they are not needed.

#    VideoRam	256
#    Clocks	25.2 28.3

# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID	"PCI:0:10:0"

# Various option lines can be added here as required.  Some options
# are more appropriate in Screen sections, Display subsections or even
# Monitor sections.

#    Option	"hw cursor" "off"

	

	Option "TVDACLoadDetect" "TRUE"
	Option "ForceTVOut" "true"
       	Option "TVStandard" "pal"
       	Option "monitor-S-video" "TV-monitor"

EndSection




# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"

# The Identifier, Device and Monitor lines must be present

    Identifier	"Screen-LCD"
    Device	"ATI Radeon"
    Monitor	"Generic Monitor"

# The favoured Depth and/or Bpp may be specified here

    DefaultDepth 16

    SubSection "Display"
        Depth		8
        Modes		"640x480"
        ViewPort	0 0
        Virtual 	800 600
    EndSubsection

    SubSection "Display"
	Depth		16
        Modes		"640x480" "1400x1050"
#	Virtual              2048 2048 
    EndSubSection

    SubSection "Display"
	Depth		1
        Modes		"640x480"
    EndSubSection
    
    

EndSection


Section	"Screen"

	Identifier "Screen-TV"
	Device "ATI Radeon"
	Monitor "TV-monitor"
	DefaultDepth  24
        
	SubSection "Display"
                Depth          24
                Modes         "800x600"
        EndSubSection
    
	

EndSection



# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.



Section "ServerLayout"
    Identifier	"simple layout"
    Screen 0	"Screen-LCD" 0 0
    Screen 1	"Screen-TV" LeftOf "Screen-LCD"
    InputDevice	"Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection