Administrace komentářů

Tak po úpravě žádná změna :(

ještě dodam dmesg jestli mimo starého firmware na wifinu vám něco přijde podezřelé ...

user@NB-Pepe:~$ sudo dmesg
[sudo] password for user: 
[    0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[    0.000000]  BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x100000
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000007000 (usable)
[    0.000000]  modified: 0000000000007000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000092800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003ff70000 (usable)
[    0.000000]  modified: 000000003ff70000 - 000000003ff7a000 (ACPI data)
[    0.000000]  modified: 000000003ff7a000 - 000000003ff80000 (ACPI NVS)
[    0.000000]  modified: 000000003ff80000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ff800000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fffffc00 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378ba000 - 37fef9b4
[    0.000000] Allocated new RAMDISK: 0087d000 - 00fb29b4
[    0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fef9b3 to 0087d000 - 00fb29b3
[    0.000000] ACPI: RSDP 000F6310, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 3FF74A6D, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 3FF79ECF, 0074 (r1 QUANTA DT3       6040000 PTL         3)
[    0.000000] ACPI: DSDT 3FF74AA1, 542E (r1  INTEL SPRGDALE  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FF7AFC0, 0040
[    0.000000] ACPI: APIC 3FF79F43, 005E (r1 PTLTD       APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 3FF79FA1, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 3FF79FC9, 0037 (r1 PTLTD  ACPIHT    6040000  LTP        1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 139MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008780ac]    TEXT DATA BSS ==> [0000100000 - 00008780ac]
[    0.000000]   #4 [0000879000 - 000087d000]    INIT_PG_TABLE ==> [0000879000 - 000087d000]
[    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [000087d000 - 0000fb29b4]      NEW RAMDISK ==> [000087d000 - 0000fb29b4]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00f6290] 000f6290
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0003ff70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x00000007
[    0.000000]     0: 0x00000010 -> 0x00000092
[    0.000000]     0: 0x00000100 -> 0x0003ff70
[    0.000000] On node 0 totalpages: 261877
[    0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3941 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 279 pages used for memmap
[    0.000000]   HighMem zone: 35419 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259830
[    0.000000] Kernel command line: root=UUID=6bcb3c55-aaf2-447f-a748-d6b826f36b29 ro quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2992.506 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 5240000 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 1017800k/1048000k available (4115k kernel code, 29300k reserved, 2199k data, 532k init, 142792k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0733000 - 0xc07b8000   ( 532 kB)
[    0.004000]       .data : 0xc0504f5f - 0xc072ae60   (2199 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0504f5f   (4115 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.01 BogoMIPS (lpj=11970024)
[    0.004039] Security Framework initialized
[    0.004054] SELinux:  Disabled at boot.
[    0.004081] AppArmor: AppArmor initialized
[    0.004097] Mount-cache hash table entries: 512
[    0.004301] Initializing cgroup subsys ns
[    0.004306] Initializing cgroup subsys cpuacct
[    0.004310] Initializing cgroup subsys memory
[    0.004316] Initializing cgroup subsys freezer
[    0.004336] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004340] CPU: L2 cache: 512K
[    0.004344] CPU: Physical Processor ID: 0
[    0.004347] CPU: Processor Core ID: 0
[    0.004365] Checking 'hlt' instruction... OK.
[    0.022940] ACPI: Core revision 20080926
[    0.025947] ACPI: Checking initramfs for custom DSDT
[    0.312541] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.316001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.316001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.316001] ..... (found apic 0 pin 0) ...
[    0.358658] ....... works.
[    0.358660] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    0.360001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5985.50 BogoMIPS (lpj=11971003)
[    0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004000] CPU: L2 cache: 512K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.444282] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    0.444307] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.448073] Brought up 2 CPUs
[    0.448078] Total of 2 processors activated (11970.51 BogoMIPS).
[    0.448131] CPU0 attaching sched-domain:
[    0.448134]  domain 0: span 0-1 level SIBLING
[    0.448138]   groups: 0 1
[    0.448147] CPU1 attaching sched-domain:
[    0.448149]  domain 0: span 0-1 level SIBLING
[    0.448152]   groups: 1 0
[    0.448267] net_namespace: 776 bytes
[    0.448277] Booting paravirtualized kernel on bare hardware
[    0.448515] Time: 16:31:42  Date: 09/25/09
[    0.448515] regulator: core version 0.5
[    0.448515] NET: Registered protocol family 16
[    0.448515] EISA bus registered
[    0.448515] ACPI: bus type pci registered
[    0.449592] PCI: PCI BIOS revision 2.10 entry at 0xfd952, last bus=3
[    0.449595] PCI: Using configuration type 1 for base access
[    0.453122] ACPI: EC: Look up EC in DSDT
[    0.458532] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.458719] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.468797] ACPI: Interpreter enabled
[    0.468802] ACPI: (supports S0 S3 S4 S5)
[    0.468824] ACPI: Using IOAPIC for interrupt routing
[    0.474752] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.474756] ACPI: EC: driver started in interrupt mode
[    0.474924] ACPI: No dock devices found.
[    0.474942] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.475004] pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
[    0.475133] pci 0000:00:1d.0: reg 20 io port: [0x1cc0-0x1cdf]
[    0.475185] pci 0000:00:1d.1: reg 20 io port: [0x1ce0-0x1cff]
[    0.475237] pci 0000:00:1d.2: reg 20 io port: [0x2000-0x201f]
[    0.475298] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff]
[    0.475344] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.475349] pci 0000:00:1d.7: PME# disabled
[    0.475437] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.475444] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[    0.475449] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[    0.475471] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.475479] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.475486] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.475493] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.475501] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f]
[    0.475508] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[    0.475549] pci 0000:00:1f.5: reg 10 io port: [0x1400-0x14ff]
[    0.475556] pci 0000:00:1f.5: reg 14 io port: [0x1c80-0x1cbf]
[    0.475563] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff]
[    0.475570] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff]
[    0.475593] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.475598] pci 0000:00:1f.5: PME# disabled
[    0.475628] pci 0000:00:1f.6: reg 10 io port: [0x1800-0x18ff]
[    0.475635] pci 0000:00:1f.6: reg 14 io port: [0x1c00-0x1c7f]
[    0.475666] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.475671] pci 0000:00:1f.6: PME# disabled
[    0.475709] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff]
[    0.475716] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff]
[    0.475736] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.475783] pci 0000:00:01.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff]
[    0.475788] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.475839] pci 0000:03:00.0: reg 10 32bit mmio: [0xd2000000-0xd200ffff]
[    0.475880] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.475884] pci 0000:03:00.0: PME# disabled
[    0.475919] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.475929] pci 0000:03:01.0: supports D1 D2
[    0.475932] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.475936] pci 0000:03:01.0: PME# disabled
[    0.475971] pci 0000:03:02.0: reg 10 32bit mmio: [0xd2016000-0xd20167ff]
[    0.475980] pci 0000:03:02.0: reg 14 32bit mmio: [0xd2010000-0xd2013fff]
[    0.476024] pci 0000:03:02.0: supports D1 D2
[    0.476027] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot
[    0.476031] pci 0000:03:02.0: PME# disabled
[    0.476054] pci 0000:03:03.0: reg 10 32bit mmio: [0xd2014000-0xd2015fff]
[    0.476119] pci 0000:00:1e.0: transparent bridge
[    0.476126] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2000000-0xd20fffff]
[    0.476157] bus 00 -> node 0
[    0.476164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.476391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.476510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[    0.480303] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11 14 15)
[    0.480431] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *5
[    0.480555] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11 14 15)
[    0.480677] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11 14 15)
[    0.480808] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11 14 15)
[    0.480942] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0, disabled.
[    0.481074] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0, disabled.
[    0.481207] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11 14 15)
[    0.481394] ACPI: WMI: Mapper loaded
[    0.481497] SCSI subsystem initialized
[    0.481497] libata version 3.00 loaded.
[    0.481497] usbcore: registered new interface driver usbfs
[    0.481497] usbcore: registered new interface driver hub
[    0.481497] usbcore: registered new device driver usb
[    0.481497] PCI: Using ACPI for IRQ routing
[    0.488015] Bluetooth: Core ver 2.13
[    0.488056] NET: Registered protocol family 31
[    0.488056] Bluetooth: HCI device and connection manager initialized
[    0.488056] Bluetooth: HCI socket layer initialized
[    0.488056] NET: Registered protocol family 8
[    0.488056] NET: Registered protocol family 20
[    0.488056] NetLabel: Initializing
[    0.488056] NetLabel:  domain hash size = 128
[    0.488056] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.488073] NetLabel:  unlabeled traffic allowed by default
[    0.488179] hpet clockevent registered
[    0.488184] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.488189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.488197] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.492106] AppArmor: AppArmor Filesystem Enabled
[    0.500013] pnp: PnP ACPI init
[    0.500032] ACPI: bus type pnp registered
[    0.505719] pnp: PnP ACPI: found 11 devices
[    0.505722] ACPI: ACPI bus type pnp unregistered
[    0.505726] PnPBIOS: Disabled by ACPI PNP
[    0.505741] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.505745] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.505749] system 00:01: ioport range 0x1c0-0x1cf has been reserved
[    0.505752] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.505755] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.505760] system 00:01: iomem range 0xfecf0000-0xfecfffff has been reserved
[    0.505764] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.540527] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
[    0.540532] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.540534] pci 0000:00:01.0:   IO window: disabled
[    0.540540] pci 0000:00:01.0:   MEM window: 0xd1000000-0xd1ffffff
[    0.540545] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.540557] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
[    0.540560] pci 0000:03:01.0:   IO window: 0x003000-0x0030ff
[    0.540565] pci 0000:03:01.0:   IO window: 0x003400-0x0034ff
[    0.540570] pci 0000:03:01.0:   PREFETCH window: 0x50000000-0x53ffffff
[    0.540575] pci 0000:03:01.0:   MEM window: 0x58000000-0x5bffffff
[    0.540580] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.540584] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
[    0.540590] pci 0000:00:1e.0:   MEM window: 0xd2000000-0xd20fffff
[    0.540595] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
[    0.540614] pci 0000:00:1e.0: setting latency timer to 64
[    0.540629] pci 0000:03:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.540635] bus: 00 index 0 io port: [0x00-0xffff]
[    0.540638] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.540640] bus: 01 index 0 mmio: [0x0-0x0]
[    0.540643] bus: 01 index 1 mmio: [0xd1000000-0xd1ffffff]
[    0.540646] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[    0.540648] bus: 01 index 3 mmio: [0x0-0x0]
[    0.540651] bus: 03 index 0 io port: [0x3000-0x3fff]
[    0.540654] bus: 03 index 1 mmio: [0xd2000000-0xd20fffff]
[    0.540656] bus: 03 index 2 mmio: [0x50000000-0x53ffffff]
[    0.540659] bus: 03 index 3 io port: [0x00-0xffff]
[    0.540661] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[    0.540664] bus: 04 index 0 io port: [0x3000-0x30ff]
[    0.540667] bus: 04 index 1 io port: [0x3400-0x34ff]
[    0.540669] bus: 04 index 2 mmio: [0x50000000-0x53ffffff]
[    0.540672] bus: 04 index 3 mmio: [0x58000000-0x5bffffff]
[    0.540685] NET: Registered protocol family 2
[    0.556080] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.556506] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.557623] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.558350] TCP: Hash tables configured (established 131072 bind 65536)
[    0.558355] TCP reno registered
[    0.564151] NET: Registered protocol family 1
[    0.564320] checking if image is initramfs... it is
[    0.988419] Switched to high resolution mode on CPU 1
[    0.992040] Switched to high resolution mode on CPU 0
[    1.155880] Freeing initrd memory: 7382k freed
[    1.155935] Simple Boot Flag at 0x36 set to 0x1
[    1.155970] cpufreq: No nForce2 chipset.
[    1.156168] audit: initializing netlink socket (disabled)
[    1.156192] type=2000 audit(1253896302.153:1): initialized
[    1.162621] highmem bounce pool size: 64 pages
[    1.162629] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.164240] VFS: Disk quotas dquot_6.5.1
[    1.164321] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.165117] fuse init (API version 7.10)
[    1.165233] msgmni has been set to 1724
[    1.165704] alg: No test for stdrng (krng)
[    1.165727] io scheduler noop registered
[    1.165732] io scheduler anticipatory registered
[    1.165736] io scheduler deadline registered
[    1.165769] io scheduler cfq registered (default)
[    1.165881] pci 0000:01:00.0: Boot video device
[    1.169881] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.169894] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.171166] ACPI: AC Adapter [ACAD] (on-line)
[    1.680012] ACPI: EC: missing confirmations, switch off interrupt mode.
[    1.697345] ACPI: Battery Slot [BAT1] (battery present)
[    1.697445] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.697448] ACPI: Power Button (FF) [PWRF]
[    1.697508] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.697512] ACPI: Sleep Button (CM) [SLPB]
[    1.697566] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.698679] ACPI: Lid Switch [LID]
[    1.698746] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input3
[    1.698750] ACPI: Power Button (CM) [PWRB]
[    1.698971] ACPI: CPU0 (power states: C1[C1] C3[C3])
[    1.699003] processor ACPI_CPU:00: registered as cooling_device0
[    1.699008] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.699027] ACPI: Invalid PBLK length [0]
[    1.699108] processor ACPI_CPU:01: registered as cooling_device1
[    1.702951] ACPI Warning (nspredef-0858): \_TZ_.THRM._AL0: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20080926]
[    1.702961] ACPI: Expecting a [Reference] package element, found type 0
[    1.703124] thermal LNXTHERM:01: registered as thermal_zone0
[    1.705687] ACPI: Thermal Zone [THRM] (44 C)
[    1.705753] isapnp: Scanning for PnP cards...
[    2.059341] isapnp: No Plug & Play device found
[    2.072193] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    2.072278] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    2.072665] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    2.072753] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.072761] serial 0000:00:1f.6: PCI INT B disabled
[    2.073691] brd: module loaded
[    2.074127] loop: module loaded
[    2.074238] Fixed MDIO Bus: probed
[    2.074246] PPP generic driver version 2.4.2
[    2.074323] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.074366] Driver 'sd' needs updating - please use bus_type methods
[    2.074379] Driver 'sr' needs updating - please use bus_type methods
[    2.074474] ata_piix 0000:00:1f.1: version 2.12
[    2.074496] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    2.074503] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    2.074510] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.074578] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.074729] scsi0 : ata_piix
[    2.074875] scsi1 : ata_piix
[    2.076138] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
[    2.076142] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
[    2.245195] ata1.00: ATA-7: WDC WD4000AAKB-22UKA0, 07.01N01, max UDMA/100
[    2.245199] ata1.00: 781422768 sectors, multi 16: LBA48 
[    2.260634] ata1.00: configured for UDMA/100
[    2.424319] ata2.00: ATAPI: Optiarc  DVD RW AD-7633A, 1.00, max UDMA/33
[    2.440261] ata2.00: configured for UDMA/33
[    2.443950] scsi 0:0:0:0: Direct-Access     ATA      WDC WD4000AAKB-2 07.0 PQ: 0 ANSI: 5
[    2.444108] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
[    2.444130] sd 0:0:0:0: [sda] Write Protect is off
[    2.444133] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.444168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.444254] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors: (400 GB/372 GiB)
[    2.444273] sd 0:0:0:0: [sda] Write Protect is off
[    2.444277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.444310] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.444315]  sda: sda1 sda2 < sda5 sda6 > sda3
[    2.469191] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.469264] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.476723] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7633A  1.00 PQ: 0 ANSI: 5
[    2.504070] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.504075] Uniform CD-ROM driver Revision: 3.20
[    2.504217] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.504274] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.505132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.505167] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.505205] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.505210] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.505287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.509196] ehci_hcd 0000:00:1d.7: debug port 1
[    2.509204] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[    2.509222] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000
[    2.524013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.524115] usb usb1: configuration #1 chosen from 1 choice
[    2.524155] hub 1-0:1.0: USB hub found
[    2.524166] hub 1-0:1.0: 8 ports detected
[    2.524324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.524349] uhci_hcd: USB Universal Host Controller Interface driver
[    2.524399] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.524408] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.524412] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.524475] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.524506] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001cc0
[    2.524600] usb usb2: configuration #1 chosen from 1 choice
[    2.524632] hub 2-0:1.0: USB hub found
[    2.524641] hub 2-0:1.0: 2 ports detected
[    2.524759] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.524766] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.524769] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.524827] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.524855] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001ce0
[    2.525021] usb usb3: configuration #1 chosen from 1 choice
[    2.525055] hub 3-0:1.0: USB hub found
[    2.525066] hub 3-0:1.0: 2 ports detected
[    2.525179] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.525186] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.525190] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.525244] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.525272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002000
[    2.525369] usb usb4: configuration #1 chosen from 1 choice
[    2.525400] hub 4-0:1.0: USB hub found
[    2.525411] hub 4-0:1.0: 2 ports detected
[    2.525585] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    2.528875] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.529842] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.529852] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.529857] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.529864] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.529870] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.532057] mice: PS/2 mouse device common for all mice
[    2.532378] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.532408] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.532501] device-mapper: uevent: version 1.0.3
[    2.532645] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.532767] device-mapper: multipath: version 1.0.5 loaded
[    2.532772] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.532899] EISA: Probing bus 0 at eisa.0
[    2.532908] Cannot allocate resource for EISA slot 1
[    2.532912] Cannot allocate resource for EISA slot 2
[    2.532915] Cannot allocate resource for EISA slot 3
[    2.532942] EISA: Detected 0 cards.
[    2.533053] cpuidle: using governor ladder
[    2.533102] cpuidle: using governor menu
[    2.533856] TCP cubic registered
[    2.533945] NET: Registered protocol family 10
[    2.534524] lo: Disabled Privacy Extensions
[    2.534985] NET: Registered protocol family 17
[    2.535011] Bluetooth: L2CAP ver 2.11
[    2.535014] Bluetooth: L2CAP socket layer initialized
[    2.535018] Bluetooth: SCO (Voice Link) ver 0.6
[    2.535020] Bluetooth: SCO socket layer initialized
[    2.535088] Bluetooth: RFCOMM socket layer initialized
[    2.535105] Bluetooth: RFCOMM TTY layer initialized
[    2.535110] Bluetooth: RFCOMM ver 1.10
[    2.535195] Using IPI No-Shortcut mode
[    2.535336] registered taskstats version 1
[    2.535477]   Magic number: 9:73:541
[    2.535576] rtc_cmos 00:04: setting system clock to 2009-09-25 16:31:44 UTC (1253896304)
[    2.535583] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.535586] EDD information not available.
[    2.536263] Freeing unused kernel memory: 532k freed
[    2.536452] Write protecting the kernel text: 4116k
[    2.536521] Write protecting the kernel read-only data: 1528k
[    2.564062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.837036] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.926949] tg3.c:v3.94 (August 14, 2008)
[    2.926976] tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.974191] usb 1-1: configuration #1 chosen from 1 choice
[    3.024588] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:c0:9f:3f:66:51
[    3.024595] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[    3.024599] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[    3.040399] FDC 0 is a National Semiconductor PC87306
[    3.077787] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    3.081581] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0
[    3.087400] ohci1394 0000:03:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.137354] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[d2016000-d20167ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.381066] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    3.483102] Initializing USB Mass Storage driver...
[    3.494992] scsi2 : SCSI emulation for USB Mass Storage devices
[    3.495518] usb-storage: device found at 2
[    3.495524] usb-storage: waiting for device to settle before scanning
[    3.495564] usbcore: registered new interface driver usb-storage
[    3.495574] USB Mass Storage support registered.
[    3.630154] PM: Starting manual resume from disk
[    3.630160] PM: Resume from partition 8:6
[    3.630162] PM: Checking hibernation image.
[    3.630414] PM: Resume from disk failed.
[    3.646928] kjournald starting.  Commit interval 5 seconds
[    3.646944] EXT3-fs: mounted filesystem with ordered data mode.
[    3.757232] usb 4-2: configuration #1 chosen from 1 choice
[    4.412218] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000019d63b]
[    7.499937] udev: starting version 141
[    7.670279] Bluetooth: Generic Bluetooth USB driver ver 0.3
[    7.670464] usbcore: registered new interface driver btusb
[    7.732268] parport_pc 00:08: reported by Plug and Play ACPI
[    7.732309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    7.759181] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.772806] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[    7.783113] Linux agpgart interface v0.103
[    7.797889] intel_rng: FWH not detected
[    7.804282] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.223875] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[    8.410120] nvidia: module license 'NVIDIA' taints kernel.
[    8.451051] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    8.484250] yenta_cardbus 0000:03:01.0: CardBus bridge found [1025:0045]
[    8.484273] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI
[    8.484277] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI
[    8.484284] yenta_cardbus 0000:03:01.0: TI: mfunc 0x01121c12, devctl 0x44
[    8.492556] usb-storage: device scan complete
[    8.493665] scsi 2:0:0:0: Direct-Access     USB2.0   CardReader CF RW 0814 PQ: 0 ANSI: 0
[    8.494772] scsi 2:0:0:1: Direct-Access     USB2.0   CardReader Combo 0814 PQ: 0 ANSI: 0
[    8.499129] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    8.499364] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    8.501157] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[    8.501325] sd 2:0:0:1: Attached scsi generic sg3 type 0
[    8.546375] iTCO_vendor_support: vendor-support=0
[    8.548940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[    8.549109] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
[    8.549222] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.597716] ppdev: user-space parallel port driver
[    8.649764] acer-wmi: Acer Laptop ACPI-WMI Extras
[    8.649781] acer-wmi: No or unsupported WMI interface, unable to load
[    8.671737] nvidia 0000:01:00.0: power state changed by ACPI to D0
[    8.671754] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.672363] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.16  Sat Jan 24 19:42:59 PST 2009
[    8.676714] cfg80211: Calling CRDA to update world regulatory domain
[    8.717355] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0810, PCI irq 18
[    8.717360] yenta_cardbus 0000:03:01.0: Socket status: 30000006
[    8.717365] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #03 to #07
[    8.717376] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[    8.717380] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean.
[    8.717671] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[    8.717675] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[    8.736736] cfg80211: World regulatory domain updated:
[    8.736742]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.736745]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.736749]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.736752]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.736755]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.736758]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.808124] b43-phy0: Broadcom 4306 WLAN found
[    8.861232] phy0: Selected rate control algorithm 'pid'
[    8.912960] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.913112] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    8.924662] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[    9.071553] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[    9.073336] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[    9.074164] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    9.074812] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    9.075681] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[    9.227323] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x1d48b1, caps: 0x904713/0x4006
[    9.270681] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[    9.740015] intel8x0_measure_ac97_clock: measured 54255 usecs
[    9.740019] intel8x0: clocking to 48000
[    9.915706] lp0: using parport0 (interrupt-driven).
[   10.074035] Adding 738948k swap on /dev/sda6.  Priority:-1 extents:1 across:738948k
[   10.638623] EXT3 FS on sda5, internal journal
[   12.514985] type=1505 audit(1253889114.477:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2132
[   12.569730] type=1505 audit(1253889114.533:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2136
[   12.569968] type=1505 audit(1253889114.533:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2136
[   12.570034] type=1505 audit(1253889114.533:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2136
[   12.570093] type=1505 audit(1253889114.533:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2136
[   12.718727] type=1505 audit(1253889114.681:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2141
[   12.719042] type=1505 audit(1253889114.681:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2141
[   12.771086] type=1505 audit(1253889114.732:9): operation="profile_load" name="/usr/sbin/dhcpd3" name2="default" pid=2145
[   12.810322] type=1505 audit(1253889114.773:10): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2149
[   12.844612] type=1505 audit(1253889114.805:11): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=2153
[   17.674437] __ratelimit: 3 callbacks suppressed
[   17.674444] localedef[2743]: segfault at c ip 08070e6b sp bfd50a9c error 4 in localedef[8048000+4d000]
[   20.237874] NET: Registered protocol family 4
[   25.602919] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   25.602927] vboxdrv: Successfully done.
[   25.602930] vboxdrv: Found 2 processor cores.
[   25.603110] vboxdrv: fAsync=0 offMin=0x404 offMax=0x5440
[   25.603211] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   25.603215] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[   27.522994] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.523000] Bluetooth: BNEP filters: protocol multicast
[   27.541336] Bridge firewalling registered
[   28.919557] warning: `dhcpd3' uses 32-bit capabilities (legacy support in use)
[   36.307280] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   36.784563] input: b43-phy0 as /devices/virtual/input/input9
[   36.812041] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   36.860209] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[   36.892075] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[   36.956932] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[   37.100032] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   37.100040] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[   37.100045] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   37.160681] Registered led device: b43-phy0::tx
[   37.160704] Registered led device: b43-phy0::rx
[   37.160729] Registered led device: b43-phy0::radio
[   37.184450] b43-phy0: Radio turned on by software
[   37.184830] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   40.204963] wlan0: authenticate with AP 00:4f:62:1f:50:cd
[   40.206414] wlan0: authenticated
[   40.206425] wlan0: associate with AP 00:4f:62:1f:50:cd
[   40.209164] wlan0: RX AssocResp from 00:4f:62:1f:50:cd (capab=0x411 status=0 aid=1)
[   40.209170] wlan0: associated
[   40.209514] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   50.884015] wlan0: no IPv6 routers present
user@NB-Pepe:~$