Administrace komentářů

cpqci                  42344  7 
mptctl                 65993  4 
mptbase                69057  1 mptctl
sg                     42873  0 
ipmi_si                44760  2 
ipmi_devintf           11024  4 
ipmi_msghandler        34696  2 ipmi_si,ipmi_devintf
md5                     5953  1 
ipv6                  285089  1012 
i2c_dev                13889  0 
i2c_core               28865  1 i2c_dev
loop                   18641  0 
button                  9313  0 
battery                11465  0 
ac                      6985  0 
hw_random               7393  0 
bnx2                   92888  0 
bonding                69820  0 
dm_snapshot            19329  2 
dm_zero                 3905  0 
dm_mirror              32201  0 
ext3                  139089  4 
jbd                    69745  1 ext3
dm_mod                 74153  17 dm_snapshot,dm_zero,dm_mirror
qla2400               205121  0 
cciss                  73017  3 
qla2xxx               183713  1 qla2400
scsi_transport_fc      12353  1 qla2xxx
usb_storage            71561  0 
uhci_hcd               35305  0 
ohci_hcd               24657  0 
ehci_hcd               33989  0 
sd_mod                 19649  0 
scsi_mod              145297  6 sg,cciss,qla2xxx,scsi_transport_fc,usb_storage,sd_mod

Bootdata ok (command line is ro root=/dev/vg0/root rhgb quiet maxcpus=2)
Linux version 2.6.9-55.ELsmp (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Apr 20 16:36:54 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfe54000 (usable)
 BIOS-e820: 00000000cfe54000 - 00000000cfe5c000 (ACPI data)
 BIOS-e820: 00000000cfe5c000 - 00000000cfe5d000 (usable)
 BIOS-e820: 00000000cfe5d000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000082ffff000 (usable)
ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f00
ACPI: XSDT (v001 HP     ProLiant 0x00000002 �? 0x0000162e) @ 0x00000000cfe547c0
ACPI: FADT (v003 HP     ProLiant 0x00000002 �? 0x0000162e) @ 0x00000000cfe54840
ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 �? 0x0000162e) @ 0x00000000cfe54140
ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x00000000cfe541c0
ACPI: HPET (v001 HP     ProLiant 0x00000002 �? 0x0000162e) @ 0x00000000cfe54200
ACPI: SPMI (v005 HP     ProLiant 0x00000001 �? 0x0000162e) @ 0x00000000cfe54240
ACPI: ERST (v001 HP     ProLiant 0x00000001 �? 0x0000162e) @ 0x00000000cfe54280
ACPI: MADT (v001 HP     ProLiant 0x00000002  0x00000000) @ 0x00000000cfe54480
ACPI: FFFF (v001 HP     ProLiant 0x00000001 �? 0x0000162e) @ 0x00000000cfe54540
ACPI: BERT (v001 HP     ProLiant 0x00000001 �? 0x0000162e) @ 0x00000000cfe546c0
ACPI: HEST (v001 HP     ProLiant 0x00000001 �? 0x0000162e) @ 0x00000000cfe54700
ACPI: SSDT (v001 HP        SSDTP 0x00000001 INTL 0x20061109) @ 0x00000000cfe59000
ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20061109) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-000000082ffff000
Bootmem setup node 0 0000000000000000-000000082ffff000
On node 0 totalpages: 8585215
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 8581119 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.4 present.
ServerWorks chipset detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6 6:15 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 16
WARNING: maxcpus limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 6:15 APIC version 16
WARNING: maxcpus limit of 2 reached. Processor ignored.
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Setting APIC routing to flat
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Checking aperture...
Built 1 zonelists
Kernel command line: ro root=/dev/vg0/root rhgb quiet maxcpus=2 console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 3000.111 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Placing software IO TLB between 0x7183000 - 0xb183000
Memory: 32910336k/34340860k available (2112k kernel code, 0k reserved, 1305k data, 208k init)
Calibrating delay using timer specific routine.. 6004.31 BogoMIPS (lpj=3002156)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
using mwait in idle threads.
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
Using IO APIC NMI watchdog
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU0: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 06
per-CPU timeslice cutoff: 4095.03 usecs.
task migration cache decay timeout: 4 msecs.
Booting processor 1/6 rip 6000 rsp 10813535f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.30 BogoMIPS (lpj=3000154)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU1: Physical Processor ID: 3
CPU1: Processor Core ID: 6
CPU1: Initial APIC ID: 6
Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 0b
Total of 2 processors activated (12004.62 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 20.834 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
time.c: Using HPET/TSC based timekeeping.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: HP ProLiant BL460c G1 detected, enabling pci=bfsort.
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:0b:08.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 19 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:13:00.1[B] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 23 (level, low) -> IRQ 201
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 209
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 217
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 217
ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 209
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1244625892.754:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key B7CA3C9BE2FAFC39
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU6] (supports C1)
ACPI: Thermal Zone [THM0] (8 C)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices: 
PCI0 
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 208k freed
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 169, pci mem ffffff0000016000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 169, io base 0000000000001000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 0000000000001020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0000000000001040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 193, io base 0000000000001060
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 217
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: irq 217, io base 0000000000003800
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 5-1: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [HEWLETT-PACKARD Hewlett-Packard TFT7600 RKM] on usb-0000:00:1d.3-1
input: USB HID v1.10 Mouse [HEWLETT-PACKARD Hewlett-Packard TFT7600 RKM] on usb-0000:00:1d.3-1
usb 6-1: new full speed USB device using address 2
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usb 6-2: new full speed USB device using address 3
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 7 ports detected
QLogic Fibre Channel HBA Driver
HP CISS Driver (v 2.6.14.RH2)
cciss: Device 0x3238 has been found at bus 11 dev 8 func 0
ACPI: PCI Interrupt 0000:0b:08.0[A] -> GSI 18 (level, low) -> IRQ 185
MSI INIT SUCCESS
cciss: using DAC cycles
      blocks= 286677119 block_size= 512
      heads= 255, sectors= 32, cylinders= 35132

Using cfq io scheduler
      blocks= 286677119 block_size= 512
      heads= 255, sectors= 32, cylinders= 35132

 cciss/c0d0: p1 p2
ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 19 (level, low) -> IRQ 193
qla2400 0000:13:00.0: Found an ISP2432, irq 193, iobase 0xffffff000001c000
qla2400 0000:13:00.0: Configuring PCI space...
PCI: Setting latency timer of device 0000:13:00.0 to 64
qla2400 0000:13:00.0: Configure NVRAM parameters...
qla2400 0000:13:00.0: Verifying loaded RISC code...
qla2400 0000:13:00.0: Allocated (1061 KB) for firmware dump...
qla2400 0000:13:00.0: Waiting for LIP to complete...
qla2400 0000:13:00.0: Cable is unplugged...
scsi0 : qla2xxx
qla2400 0000:13:00.0: 
 QLogic Fibre Channel HBA Driver: 8.01.04-d8
  QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel
  ISP2432: PCIe (2.5Gb/s x4) @ 0000:13:00.0 hdma+, host#=0, fw=4.00.23 [IP] 
ACPI: PCI Interrupt 0000:13:00.1[B] -> GSI 16 (level, low) -> IRQ 169
qla2400 0000:13:00.1: Found an ISP2432, irq 169, iobase 0xffffff000001e000
qla2400 0000:13:00.1: Configuring PCI space...
PCI: Setting latency timer of device 0000:13:00.1 to 64
qla2400 0000:13:00.1: Configure NVRAM parameters...
qla2400 0000:13:00.1: Verifying loaded RISC code...
qla2400 0000:13:00.1: Allocated (1061 KB) for firmware dump...
qla2400 0000:13:00.1: Waiting for LIP to complete...
qla2400 0000:13:00.1: Cable is unplugged...
scsi1 : qla2xxx
qla2400 0000:13:00.1: 
 QLogic Fibre Channel HBA Driver: 8.01.04-d8
  QLogic QMH2462 - SBUS to 2Gb FC, Dual Channel
  ISP2432: PCIe (2.5Gb/s x4) @ 0000:13:00.1 hdma+, host#=1, fw=4.00.23 [IP] 
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-55.ELsmp
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005)
bonding: MII link monitoring set to 500 ms
divert: allocating divert_blk for bond0
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.52d (March 7, 2007)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth0
eth0: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 169, node addr 0017a4770410
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 169
divert: allocating divert_blk for eth1
eth1: Broadcom NetXtreme II BCM5708 1000Base-SX (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 169, node addr 0017a4770412
hw_random hardware driver 1.0.0 loaded
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
EXT3 FS on dm-1, internal journal
loop: loaded (max 8 devices)
kjournald starting.  Commit interval 5 seconds
EXT3 FS on cciss/c0d0p1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4095992k swap on /dev/vg0/swap.  Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 tigran@veritas.com
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
bnx2: eth0: using MSI
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
bnx2: eth1: using MSI
bonding: bond0: enslaving eth1 as a backup interface with a down link.
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80408540(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
bond0: duplicate address detected!
ipmi message handler version v33
ipmi message handler version v33
ipmi device interface version v33
IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33
ipmi_si: Searching for PCI Vendor 0x103c, Device 0x3302
ipmi_si: Trying "kcs" at memory address 0xf5ef0000
ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 209
ipmi_si: Found PCI BMC at BAR address 0xf5ef0000
ipmi_si: Using PCI Plug and Play interrupt 209
eth0: no IPv6 routers present
eth1: no IPv6 routers present
 IPMI kcs interface [0] initialized
Fusion MPT base driver 3.02.73rh
Copyright (c) 1999-2006 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.02.73rh
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
cpqci: module license 'Proprietary' taints kernel.
ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 217
usb 5-1: USB disconnect, address 2
device-mapper: Invalidating snapshot: Unable to allocate exception.
SysRq : Show Memory
Mem-info:
Node 0 DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Node 0 Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
Node 0 HighMem per-cpu: empty

Free pages:       24624kB (0kB HighMem)
Active:1600279 inactive:64315 dirty:1578 writeback:0 unstable:0 free:6156 slab:67129 mapped:1516529 pagetables:22018
Node 0 DMA free:10872kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:16384kB pages_scanned:156 all_unreclaimable? yes
protections[]: 0 0 0
Node 0 Normal free:13752kB min:5852kB low:11704kB high:17556kB active:6401116kB inactive:257260kB present:34324476kB pages_scanned:0 all_unreclaimable? no
protections[]: 0 0 0
Node 0 HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
protections[]: 0 0 0
Node 0 DMA: 0*4kB 1*8kB 1*16kB 1*32kB 3*64kB 1*128kB 1*256kB 2*512kB 1*1024kB 0*2048kB 2*4096kB = 10872kB
Node 0 Normal: 332*4kB 83*8kB 257*16kB 47*32kB 16*64kB 2*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 1*4096kB = 13752kB
Node 0 HighMem: empty
Swap cache: add 3741606, delete 3664002, find 11322396/11623940, race 36+1824
Free swap:       873612kB
8585215 pages of RAM
357572 reserved pages
186996 pages shared
77609 pages swap cached
Losing some ticks... checking if CPU frequency changed.