Administrace komentářů

w_scan -f t -c CZ -X > channel.conf
w_scan version 20090808 (compiled for DVB API 5.0)
using settings for CZECH REPUBLIC
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
	/dev/dvb/adapter0/frontend0 -> DVB-T "Realtek RTL2832 DVB-T  RTL2836 DTMB": good 
	/dev/dvb/adapter1/frontend0 -> DVB-T "Realtek RTL2832 DVB-T  RTL2836 DTMB": good 
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.1
frontend Realtek RTL2832 DVB-T  RTL2836 DTMB supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
Scanning 7MHz frequencies...
177500: (time: 00:01) set_frontend:1690: FATAL: unsupported DVB API Version 5.1

dmesg
[   17.467653] dvb-usb: found a 'USB DVB-T Device' in warm state.
[   17.467661] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   17.493005] DVB: registering new adapter (USB DVB-T Device)
[   17.493341] DVB: registering adapter 0 frontend 0 (Realtek RTL2832 DVB-T  RTL2836 DTMB)...
[   17.493369] dvb-usb: USB DVB-T Device successfully initialized and connected.
[   17.493386] dvb-usb: found a 'USB DVB-T Device' in warm state.
[   17.493392] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   17.495526] DVB: registering new adapter (USB DVB-T Device)
[   17.495836] DVB: registering adapter 1 frontend 0 (Realtek RTL2832 DVB-T  RTL2836 DTMB)...
[   17.495865] dvb-usb: USB DVB-T Device successfully initialized and connected.

lsusb
Bus 001 Device 003: ID 1f4d:b803