Administrace komentářů

Enable VLAN - Check this box and then you can change the VLANID of each SSID. If you want to configure the Guest and Internal networks on VLAN, the switch you are using must support VLAN. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE802.1Q standard, and enable this field.

VLANID (1-4) - Provide a number between 1 and 4095 for VLAN. This will cause the device to send packets with VLAN tags. The switch connecting with the device must support VLAN IEEE802.1Q frames. The wireless stations connecting to the SSID of a specified VLANID can communicate with the PC connecting to the port with the same VLANID on the Switch.

---------------

Jeste mne napadlo, kdybych do nejake podobne krabicky dal OpenWrt a na 1 karte vytvoril 2 SSID. Nestacilo by jenom nastavit kazde jinou sitovou adresu?

Krabicka by se pres kabel pripojila na server a overila se pres radius, to by ji umoznilo pouzivat rozsah 192.168.0.0 - 192.168.255.255 (/16). (A kdyby nekdo na kabel pripojil vlastni krabicku, tak by mu nefungovala.)

1. SSID by dostalo 192.168.0.0  - 192.168.15.255 (/20) - bez zabezpeceni
2. SSID by dostalo 192.168.16.0 - 192.168.31.255 (/20) - zabezpecene radiusem

Firewall v OpenWrt krabicce by poresil pristup z 1. SSID, tedy presmerovani vseho na port 80 na serveru. 2. SSID by fungovalo jako normalni WPA enterprise radius AP.

Takhle by to asi melo fungovat, ale je s tim moc prace