Administrace komentářů

K mé radosti máme po "zábavě". Před chvílí jsem aktualizoval na Linux 3.11.10-200.fc19.x86_64 a všiml si, že upgrade se dotkl i usb_modeswitch (byť asi rozhodující je novější kernel). Teď je modem Huawei E1750 připraven během chvilky a v dmesgu má idProduct=1446. Pro zajímavost přikládám aktuální výpis, který začíná přehozením z jednoho USB do druhého a končí, když už jsem byl na Netu.

[Dec11 03:28] sd 9:0:0:0: [sdc] Test WP failed, assume Write Enabled
[  +0.001611] sd 9:0:0:0: [sdc] Asking for cache data failed
[  +0.000012] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ +21.307278] usb 1-9: USB disconnect, device number 6
[  +0.002402] option1 ttyUSB0: option_instat_callback: error -108
[  +0.000250] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000012] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000008] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000009] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.001103] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[  +0.000067] option 1-9:1.0: device disconnected
[  +0.002300] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[  +0.000074] option 1-9:1.1: device disconnected
[  +0.000431] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000013] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000009] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.000008] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[  +0.002607] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[  +0.000048] option 1-9:1.2: device disconnected
[  +6.637567] usb 1-7: new high-speed USB device number 7 using ehci-pci
[  +0.116445] usb 1-7: New USB device found, idVendor=12d1, idProduct=1446
[  +0.000011] usb 1-7: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[  +0.000008] usb 1-7: Product: HUAWEI Mobile
[  +0.000008] usb 1-7: Manufacturer: HUAWEI Technology
[  +0.009179] usb-storage 1-7:1.0: USB Mass Storage device detected
[  +0.000180] scsi19 : usb-storage 1-7:1.0
[  +0.003758] usb-storage 1-7:1.1: USB Mass Storage device detected
[  +0.000178] scsi20 : usb-storage 1-7:1.1
[  +0.601044] usb 1-7: USB disconnect, device number 7
[Dec11 03:29] usb 1-7: new high-speed USB device number 8 using ehci-pci
[  +0.117614] usb 1-7: New USB device found, idVendor=12d1, idProduct=1001
[  +0.000015] usb 1-7: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[  +0.000008] usb 1-7: Product: HUAWEI Mobile
[  +0.000007] usb 1-7: Manufacturer: HUAWEI Technology
[  +0.007588] usb-storage 1-7:1.0: USB Mass Storage device detected
[  +0.000171] option 1-7:1.0: GSM modem (1-port) converter detected
[  +0.001613] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB0
[  +0.003380] usb-storage 1-7:1.1: USB Mass Storage device detected
[  +0.000151] option 1-7:1.1: GSM modem (1-port) converter detected
[  +0.000741] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB1
[  +0.003802] usb-storage 1-7:1.2: USB Mass Storage device detected
[  +0.000144] option 1-7:1.2: GSM modem (1-port) converter detected
[  +0.000559] usb 1-7: GSM modem (1-port) converter now attached to ttyUSB2
[  +0.003707] usb-storage 1-7:1.3: USB Mass Storage device detected
[  +0.000989] scsi24 : usb-storage 1-7:1.3
[  +0.002824] usb-storage 1-7:1.4: USB Mass Storage device detected
[  +0.000567] scsi25 : usb-storage 1-7:1.4
[  +1.000008] scsi 24:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[  +0.003470] sr1: scsi-1 drive
[  +0.001079] scsi 25:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[  +0.000172] sr 24:0:0:0: Attached scsi CD-ROM sr1
[  +0.000728] sr 24:0:0:0: Attached scsi generic sg2 type 5
[  +0.002404] sd 25:0:0:0: Attached scsi generic sg3 type 0
[  +0.002373] sd 25:0:0:0: [sdb] Attached SCSI removable disk
[ +17.591829] sd 9:0:0:0: [sdc] Test WP failed, assume Write Enabled
[  +0.001767] sd 9:0:0:0: [sdc] Asking for cache data failed
[  +0.000012] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[  +0.172295] usb 1-8: reset high-speed USB device number 4 using ehci-pci

Tak že díky všem za reakce i těm, co to opravili. (Takto kdyby fungovalo vše a pořád, to by byl život snad i nuda)