Administrace komentářů

Sending to fax using: /usr/bin/sendfax -n -h  \
'/usr/sbin/hylafax'  -d 'Send fax'@'0524566215' \
 -x 'Enterprise' -c 'Komentar' -f 'ondrej@pczona.sk' \
'/tmp/kde-ondrik/kdeprint_TlAwoIA'

sendfax: Unused options after last destination. 
usage: sendfax [options] [files]
(Read the manual page; it's too complicated

CountryCode:		421
AreaCode:		52
FAXNumber:		+421524566215
LongDistancePrefix:	00421
InternationalPrefix:	00
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		medium
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1  # use this to supply a hint
ModemRate:		19200	# rate for DCE-DTE communication
ModemFlowControl:	rtscts	# default
#
ModemNoFlowCmd:		AT&K0	# setup no flow control
ModemHardFlowCmd:	AT&K3	# setup hardware flow control
ModemSoftFlowCmd:	AT&K4	# setup software flow control
ModemSetupDTRCmd:	AT&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1	# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3	# product information
#
ModemDialCmd:		ATDT%s	# T for tone dialing