IDE/USB2 adapter Delock (Myson Century)

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

USB 2.0 to IDE adapter

Identifikace pod Linuxem

#cat /proc/bus/usb/devices
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04cf ProdID=8818 Rev=b0.08
S:  Manufacturer=Myson Century, Inc.
S:  Product=USB Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms


#lsusb
Bus 001 Device 003: ID 04cf:8818 Myson Century, Inc. Fast 3.5" External Storage


#lsusb -v
Bus 001 Device 003: ID 04cf:8818 Myson Century, Inc. Fast 3.5" External Storage
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04cf Myson Century, Inc.
  idProduct          0x8818 Fast 3.5" External Storage
  bcdDevice           b0.08
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 
    bmAttributes         0xc0
      Self Powered
    MaxPower               10mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      5 SFF-8070i
      bInterfaceProtocol     80 
      iInterface              5 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Postup zprovoznění pod Linuxem

V DapperDrake a debianu plug&play

Poznámka

Mala krabicka s IDE konektorem ktery se zasune do IDE disku a umozni jeho pripojeni k PC/NTB pomoci USB. Externi napajeni (maly adapter). Adapter ma vypinac a jako prislusenstvi se dodava redukce na 2,5" disk. Pomoci datove a napajeci redukce IDE/SATA lze pripojit i sata disky.

Dokument vytvořil: Peter Lehotsky, 18.4.2006 13:35 | Poslední úprava: Peter Lehotsky, 27.2.2011 15:09 | Historie změn | Zobrazeno: 919×