Apacer Mega Steno (6in1 reader)

Ovladač:

v jádře

Technické parametry

Umí to SmartMediaTM Card, Type I/II CompactFlashTM Card, MultiMediaTM Card, IBM MicrodriveTM , Secure DigitalTM Card a Memory Stick.

Více info + fotka u výrobce: http://apacer.com/apacer_english/product_html/mega_steno11.asp

Identifikace pod Linuxem

Při připojení:

kernel: hub 1-0:1.0: new USB device on port 2, assigned address 5
kernel: SCSI subsystem initialized
kernel: Initializing USB Mass Storage driver...
kernel: scsi0 : SCSI emulation for USB Mass Storage devices
kernel: Vendor: Apacer    Model: Mega Steno        Rev: 1.03
kernel: Type:   Direct-Access                      ANSI SCSI revision: 02
scsi.agent[2557]: how to add device type= at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host0/0:0:0:0 ??
kernel: Vendor: Apacer    Model: Mega Steno        Rev: 1.03
kernel: Type:   Direct-Access                      ANSI SCSI revision: 02
scsi.agent[2572]: how to add device type= at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host0/0:0:0:1 ??
kernel: Vendor: Apacer    Model: Mega Steno        Rev: 1.03
kernel: Type:   Direct-Access                      ANSI SCSI revision: 02
kernel: WARNING: USB Mass Storage data integrity not assured
kernel: USB Mass Storage device found at 5
kernel: drivers/usb/core/usb.c: registered new driver usb-storage
kernel: USB Mass Storage support registered.
scsi.agent[2587]: disk at /devices/pci0000:00/0000:00:11.2/usb1/1-2/1-2:1.0/host0/0:0:0:2
kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
kernel: Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
kernel: Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2

Mountu s 8MB CompactFlash a mountu s 512MB CompactFlash:

kernel: SCSI device sda: 15680 512-byte hdwr sectors (8 MB)
kernel: sda: Write Protect is off
kernel: SCSI device sda: 15680 512-byte hdwr sectors (8 MB)
kernel: sda: Write Protect is off
kernel: sda: sda1
kernel: SCSI device sda: 1043968 512-byte hdwr sectors (535 MB)
kernel: sda: Write Protect is off
kernel: SCSI device sda: 1043968 512-byte hdwr sectors (535 MB)
kernel: sda: Write Protect is off
kernel: sda: sda1

Výstuplsusb:

Bus 001 Device 005: ID 0d7d:0240 Apacer I/O Magic Drive
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0d7d Apacer
  idProduct          0x0240 I/O Magic Drive
  bcdDevice            1.00
  iManufacturer           1 Apacer
  iProduct                2 Mega Steno
  iSerial                 3 19220DA1018B
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
    MaxPower              350mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               none
        wMaxPacketSize         64
        bInterval             255
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               none
        wMaxPacketSize          2
        bInterval               1
  Language IDs: (length=4)
     0409 English(US)

Postup zprovoznění pod Linuxem

Pokud je již rozběhané usb, tak stačí připojit, měl by se natáhnout modul usb-storage.

Kernel by měl být zkompilován s následujícími volbami:

CONFIG_USB_STORAGE
CONFIG_SCSI
CONFIG_SCSI_MULTI_LUN (jinak je vidět jen jeden disk místo tří)
CONFIG_BLK_DEV_SD

Poznámka

Po výměně média je potřeba 2x pustit mount, poprvý to nikdy neprojde (platí jen pro 2.4, pod 2.6 kernely už naprosto v pohodě).

Testováno na kernelu 2.4.20 a 2.6.0-test9 a jen s několika Compact Flash Type I kartami.

Dokument vytvořil: Michal Čihař, 23.4.2003 21:39 | Zobrazeno: 777×