ICY BOX IB-351UE-BL

Podpora:	kompletní
Ovladač:	v jádře

Technické parametry

USB2.0/Firewire externy hlinnikovy box
3,5" PATA disk, aj viac ako 250GB
usb2.0 - 56MB/s
firewire - 50MB/s
2 firewire konektory - da sa pripojit dalsie firewire zariadenie
zdroj 12V/2A 5V/2A

Identifikace pod Linuxem

USB:
/proc/bus/usb/devices 
T:  Bus=05 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=067b ProdID=3507 Rev= 0.01
S:  Manufacturer=Prolific Technology Inc.
S:  Product=ATAPI-6 Bridge Controller
S:  SerialNumber=128
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

dmesg
usb 5-3: new high speed USB device using ehci_hcd and address 3
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
  Vendor: Maxtor 7  Model: L250R0            Rev: BAJ4
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 490234751 512-byte hdwr sectors (251000 MB)
sdc: assuming drive cache: write through
SCSI device sdc: 490234751 512-byte hdwr sectors (251000 MB)
sdc: assuming drive cache: write through
 /dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
usb-storage: device scan complete

Firewire:
dmesg
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0050770e00000128]
SCSI subsystem initialized
sbp2: $Rev: 1306 $ Ben Collins 
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
  Vendor: Maxtor 7  Model: L250R0            Rev:
  Type:   Direct-Access-RBC                  ANSI SCSI revision: 04
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 14

Postup zprovoznění pod Linuxem

Standartne mass storage zariadenie - kubuntu 5.10 aj Fedora Core 4 automaticky spoznali disk pripojeny cez usb aj firewire

Poznámka

Spolu s diskom Maxtor Maxline III 250GB (mal by byt spolahlivejsi ako bezne IDE disky) chceme pouzit na zalohovanie. Po 3 hodinach badblocks -w bol hlinnikovy povrch boxu mierne zohriaty - box uchladi tento disk.

Dokument vytvořil: Zaphod, 7.3.2006 21:01 | Poslední úprava: Zaphod, 27.2.2011 15:09 | Historie změn | Zobrazeno: 877×