Byla vydána verze 3.0 (@, 𝕏) svobodného softwaru HAProxy (The Reliable, High Performance TCP/HTTP Load Balancer; Wikipedie) řešícího vysokou dostupnost, vyvažování zátěže a reverzní proxy. Detailní přehled novinek v příspěvku na blogu společnosti HAProxy Technologies.
Společnost Framework Computer představila novou vylepšenou verzi svého modulárního notebooku Framework Laptop 13 s Intel Core Ultra Series 1, displej s lepším rozlišením a novou webovou kameru. Přímo do Česka jej zatím koupit nelze.
Byla vydána nová verze 2.16 svobodného video editoru Flowblade (GitHub, Wikipedie). Přehled novinek v poznámkách k vydání. Videoukázky funkcí Flowblade na Vimeu. Instalovat lze také z Flathubu.
TerminalTextEffects (TTE) je engine pro vizuální efekty v terminálu. Zdrojové kódy jsou k dispozici na GitHubu pod licencí MIT.
Od čtvrtka 30. 5. do soboty 1. 6. lze v Praze navštívit Veletrh vědy, tj. největší populárně naučnou akci v České republice, kterou každoročně od roku 2015 pořádá Akademie věd ČR. Vstup zdarma.
Canonical představil Ubuntu optimalizované pro jednodeskový počítač s RISC-V procesorem Milk-V Mars.
Armbian, tj. linuxová distribuce založená na Debianu a Ubuntu optimalizovaná pro jednodeskové počítače na platformě ARM a RISC-V, ke stažení ale také pro Intel a AMD, byl vydán ve verzi 24.5.1 Havier. Přehled novinek v Changelogu.
Společnost xAI založena Elonem Muskem a stojící za AI LLM modelem Grok získala investici 6 miliard dolarů.
Finálový zápas mistrovství světa v ledním hokeji přinesl nový rekord NIX.CZ (𝕏): "Dosavadní absolutní maximum našeho propojovacího uzlu bylo překonáno v čase 21:10, kdy jsme při přenosu dat dosáhli 3,14 Tbps. Je třeba také doplnit, že po deváté hodině večerní byly na maximu i ostatní datové přenosy nesouvisející s hokejovým šampionátem".
Přihlaste svou přednášku na další ročník konference LinuxDays, který proběhne 12. a 13. října na FIT ČVUT v pražských Dejvicích. CfP poběží do konce prázdnin, pak proběhne veřejné hlasování a výběr přednášek.
To je ve vetsine pripadnu jen poslani prikazu zarizeni, aby se vypnulo (a prestalo brat proud).
Malo ktere USB porty maji vypinac napajeciho napeti. U vetsiny pridavnych HUBu jste rad, kdyz je tam jedna pojistka spolecna pro vsechny porty.
a v tu chvíli by měl host kontrolér hlídat to, že zařízení si nevezme víc, než požadovaloA když si vezme víc, tak ho má uříznout?
7.2.1.2.1 Over-current Protection The host and all self-powered hubs must implement over-current protection for safety reasons, and the hub must have a way to detect the over-current condition and report it to the USB software. Should the aggregate current drawn by a gang of downstream facing ports exceed a preset value, the over-current protection circuit removes or reduces power from all affected downstream facing ports. The over-current condition is reported through the hub to Host Controller, as described in Section 11.12.5. The preset value cannot exceed 5.0 A and must be sufficiently above the maximum allowable port current such that transient currents (e.g., during power up or dynamic attach or reconfiguration) do not trip the over-current protector. If an over-current condition occurs on any port, subsequent operation of the USB is not guaranteed, and once the condition is removed, it may be necessary to reinitialize the bus as would be done upon power-up. The over-current limiting mechanism must be resettable without user mechanical intervention. Polymeric PTCs and solid-state switches are examples of methods, which can be used for over-current limiting.A v souvislosti s tím ještě:
11.12.5 Over-current Reporting and Recovery Over-current Reporting and Recovery USB devices must be designed to meet applicable safety standards. Usually, this will mean that a selfpowered hub implement current limiting on its downstream facing ports. If an over-current condition occurs, it causes a status and state change in one or more ports. This change is reported to the USB System Software so that it can take corrective action. A hub may be designed to report over-current as either a port or a hub event. The hub descriptor field wHubCharacteristics is used to indicate the reporting capabilities of a particular hub (see Section 11.23.2). The over-current status bit in the hub or port status field indicates the state of the over-current detection when the status is returned. The over-current status change bit in the Hub or Port Change field indicates if the over-current status has changed. When a hub experiences an over-current condition, it must place all affected ports in the Powered-off state. If a hub has per-port power switching and per-port current limiting, an over-current on one port may still cause the power on another port to fall below specified minimums. In this case, the affected port is placed in the Powered-off state and C_PORT_OVER_CURRENT is set for the port, but PORT_OVER_CURRENT is not set. If the hub has over-current detection on a hub basis, then an overcurrent condition on the hub will cause all ports to enter the Powered-off state. However, in this case, neither C_PORT_OVER_CURRENT nor PORT_OVER_CURRENT is set for the affected ports. Host recovery actions for an over-current event should include the following: 1. Host gets change notification from hub with over-current event. 2. Host extracts appropriate hub or port change information (depending on the information in the change bitmap). 3. Host waits for over-current status bit to be cleared to 0. 4. Host cycles power on to all of the necessary ports (e.g., issues a SetPortFeature(PORT_POWER) request for each port). 5. Host re-enumerates all affected ports.Takže ano, to co si žere nad poměry nejspíš uřízne, dle specifikace.
Už jsem taky viděl počítač, kde Windowsy hlásily nějakou chybu typu "překročení odběru na USB portu XY". Jednalo se o závadu motherboardu. Jinak jsem tu hlášku nikde jinde nepotkal.Hlásí to i linuxové ovladače do dmesg.
Tiskni Sdílej: