Byl vydán Nextcloud Hub 8. Představení novinek tohoto open source cloudového řešení také na YouTube. Vypíchnout lze Nextcloud AI Assistant 2.0.
Vyšlo Pharo 12.0, programovací jazyk a vývojové prostředí s řadou pokročilých vlastností. Krom tradiční nadílky oprav přináší nový systém správy ladících bodů, nový způsob definice tříd, prostor pro objekty, které nemusí procházet GC a mnoho dalšího.
Microsoft zveřejnil na GitHubu zdrojové kódy MS-DOSu 4.0 pod licencí MIT. Ve stejném repozitáři se nacházejí i před lety zveřejněné zdrojové k kódy MS-DOSu 1.25 a 2.0.
Canonical vydal (email, blog, YouTube) Ubuntu 24.04 LTS Noble Numbat. Přehled novinek v poznámkách k vydání a také příspěvcích na blogu: novinky v desktopu a novinky v bezpečnosti. Vydány byly také oficiální deriváty Edubuntu, Kubuntu, Lubuntu, Ubuntu Budgie, Ubuntu Cinnamon, Ubuntu Kylin, Ubuntu MATE, Ubuntu Studio, Ubuntu Unity a Xubuntu. Jedná se o 10. LTS verzi.
Na YouTube je k dispozici videozáznam z včerejšího Czech Open Source Policy Forum 2024.
Fossil (Wikipedie) byl vydán ve verzi 2.24. Jedná se o distribuovaný systém správy verzí propojený se správou chyb, wiki stránek a blogů s integrovaným webovým rozhraním. Vše běží z jednoho jediného spustitelného souboru a uloženo je v SQLite databázi.
Byla vydána nová stabilní verze 6.7 webového prohlížeče Vivaldi (Wikipedie). Postavena je na Chromiu 124. Přehled novinek i s náhledy v příspěvku na blogu. Vypíchnout lze Spořič paměti (Memory Saver) automaticky hibernující karty, které nebyly nějakou dobu používány nebo vylepšené Odběry (Feed Reader).
OpenJS Foundation, oficiální projekt konsorcia Linux Foundation, oznámila vydání verze 22 otevřeného multiplatformního prostředí pro vývoj a běh síťových aplikací napsaných v JavaScriptu Node.js (Wikipedie). V říjnu se verze 22 stane novou aktivní LTS verzí. Podpora je plánována do dubna 2027.
Byla vydána verze 8.2 open source virtualizační platformy Proxmox VE (Proxmox Virtual Environment, Wikipedie) založené na Debianu. Přehled novinek v poznámkách k vydání a v informačním videu. Zdůrazněn je průvodce migrací hostů z VMware ESXi do Proxmoxu.
R (Wikipedie), programovací jazyk a prostředí určené pro statistickou analýzu dat a jejich grafické zobrazení, bylo vydáno ve verzi 4.4.0. Její kódové jméno je Puppy Cup.
Dřív mi bez problémů fungovalo připojení flash disku ,ale od tý doby co jsem předělal Gentoo kompletně na UTF8 a přidal jsem ivman jako automounter, tak flash nemohu namoutovat:
# mount /dev/sda1 /mnt/flash/ mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so
# dmesg mplete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x186 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x187 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete
tím to asi nebude,kdyz dam sdb nebo sdb1, vypisuje to zařízení nenalezeno
# lshal udi = '/org/freedesktop/Hal/devices/usb_device_930_651c_100_-1_0800F15032527B91' info.udi = '/org/freedesktop/Hal/devices/usb_device_930_651c_100_-1_0800F15032 527B91' (string) linux.kernel_devname = 'usb-0000:00:1f.2-1' (string) usb_device.version_bcd = 512 (0x200) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.parent_number = 3 (0x3) (int) usb_device.linux.device_number = 3 (0x3) (int) usb_device.level_number = 1 (0x1) (int) usb_device.port_number = 1 (0x1) (int) usb_device.bus_number = 1 (0x1) (int) info.product = 'USB Flash Memory' (string) usb_device.product = 'USB Flash Memory' (string) info.vendor = 'Toshiba Corp.' (string) usb_device.vendor = 'Toshiba Corp.' (string) usb_device.vendor_id = 2352 (0x930) (int) usb_device.product_id = 25884 (0x651c) (int) usb_device.serial = '0800F15032527B91' (string) usb_device.can_wake_up = false (bool) usb_device.is_self_powered = false (bool) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.max_power = 200 (0xc8) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_class = 0 (0x0) (int) usb_device.configuration_value = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_206_-1_0000:00:1f.2 ' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (st ring) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) info.bus = 'usb_device' (string)
pardon
udi = '/org/freedesktop/Hal/devices/block_6062-898A' volume.mount_point = '' (string) volume.policy.mount_option.utf8 = true (bool) volume.policy.mount_option.noatime = true (bool) volume.policy.mount_option.sync = true (bool) volume.policy.desired_mount_point = 'usbdisk' (string) volume.policy.mount_filesystem = 'vfat' (string) volume.policy.should_mount = true (bool) info.udi = '/org/freedesktop/Hal/devices/block_6062-898A' (string) volume.partition.msdos_part_table_type = 6 (0x6) (int) volume.size = 126083072 (0x783e000) (uint64) volume.block_size = 512 (0x200) (int) volume.num_blocks = 246256 (0x3c1f0) (int) volume.partition.number = 1 (0x1) (int) volume.is_partition = true (bool) volume.is_mounted = false (bool) volume.is_disc = false (bool) volume.uuid = '6062-898A' (string) volume.label = '' (string) volume.fsversion = 'FAT16' (string) volume.fsusage = 'filesystem' (string) volume.fstype = 'vfat' (string) info.product = 'Volume (vfat)' (string) block.storage_device = '/org/freedesktop/Hal/devices/block_8_0' (string) block.minor = 1 (0x1) (int) block.major = 8 (0x8) (int) info.capabilities = 'block volume' (string) info.category = 'volume' (string) block.device = '/dev/sda1' (string) info.parent = '/org/freedesktop/Hal/devices/block_8_0' (string) block.is_volume = true (bool) block.have_scanned = false (bool) block.no_partitions = false (bool) linux.sysfs_path_device = '/sys/block/sda/sda1' (string) linux.sysfs_path = '/sys/block/sda/sda1' (string) info.bus = 'block' (string) udi = '/org/freedesktop/Hal/devices/block_8_0' volume.is_partition = false (bool) storage.policy.should_mount = true (bool) info.udi = '/org/freedesktop/Hal/devices/block_8_0' (string) storage.requires_eject = false (bool) storage.hotpluggable = true (bool) storage.removable = true (bool) info.product = 'USB Flash Memory' (string) info.vendor = ' ' (string) storage.drive_type = 'disk' (string) block.storage_device = '/org/freedesktop/Hal/devices/block_8_0' (string) storage.physical_device = '/org/freedesktop/Hal/devices/usb_usb_device_930_651c_100_-1_0800F15032527B91_0' (string) storage.vendor = ' ' (string) storage.model = 'USB Flash Memory' (string) storage.automount_enabled_hint = true (bool) storage.no_partitions_hint = false (bool) storage.media_check_enabled = true (bool) storage.bus = 'usb' (string) block.minor = 0 (0x0) (int) block.major = 8 (0x8) (int) info.capabilities = 'block storage' (string) info.category = 'storage' (string) block.device = '/dev/sda' (string) info.parent = '/org/freedesktop/Hal/devices/scsi_0_0_0_0' (string) block.is_volume = false (bool) block.have_scanned = true (bool) block.no_partitions = false (bool) linux.sysfs_path_device = '/sys/block/sda' (string) linux.sysfs_path = '/sys/block/sda' (string) info.bus = 'block' (string) udi = '/org/freedesktop/Hal/devices/scsi_0_0_0_0' info.capabilities = 'scsi_generic' (string) scsi.generic_device = '/dev/sg0' (string) info.udi = '/org/freedesktop/Hal/devices/scsi_0_0_0_0' (string) info.product = 'SCSI Device' (string) scsi.lun = 0 (0x0) (int) scsi.target = 0 (0x0) (int) scsi.bus = 0 (0x0) (int) scsi.host = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/scsi_host_0' (string) scsi.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0' (string) info.bus = 'scsi' (string) udi = '/org/freedesktop/Hal/devices/scsi_host_0' info.udi = '/org/freedesktop/Hal/devices/scsi_host_0' (string) info.capabilities = 'scsi_host' (string) info.product = 'SCSI Host Interface' (string) scsi_host.host = 0 (0x0) (int) info.parent = '/org/freedesktop/Hal/devices/usb_usb_device_930_651c_100_-1_0800F15032527B91_0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host0' (string) linux.sysfs_path = '/sys/class/scsi_host/host0' (string) info.bus = 'scsi_host' (string) udi = '/org/freedesktop/Hal/devices/usb_usb_device_930_651c_100_-1_0800F15032527B91_0' info.udi = '/org/freedesktop/Hal/devices/usb_usb_device_930_651c_100_-1_0800F15032527B91_0' (string) info.product = 'USB Mass Storage Interface' (string) usb.interface.subclass = 6 (0x6) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.number = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.max_power = 200 (0xc8) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.is_self_powered = false (bool) usb.can_wake_up = false (bool) usb.serial = '0800F15032527B91' (string) usb.product_id = 25884 (0x651c) (int) usb.vendor_id = 2352 (0x930) (int) usb.vendor = 'Toshiba Corp.' (string) usb.product = 'USB Flash Memory' (string) usb.bus_number = 1 (0x1) (int) usb.port_number = 1 (0x1) (int) usb.level_number = 1 (0x1) (int) usb.linux.device_number = 3 (0x3) (int) usb.linux.parent_number = 3 (0x3) (int) usb.num_ports = 0 (0x0) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.version_bcd = 512 (0x200) (int) info.parent = '/org/freedesktop/Hal/devices/usb_device_930_651c_100_-1_0800F15032527B91' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0' (string) info.bus = 'usb' (string) udi = '/org/freedesktop/Hal/devices/usb_device_930_651c_100_-1_0800F15032527B91' info.udi = '/org/freedesktop/Hal/devices/usb_device_930_651c_100_-1_0800F15032527B91' (string) linux.kernel_devname = 'usb-0000:00:1f.2-1' (string) usb_device.version_bcd = 512 (0x200) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.linux.parent_number = 3 (0x3) (int) usb_device.linux.device_number = 3 (0x3) (int) usb_device.level_number = 1 (0x1) (int) usb_device.port_number = 1 (0x1) (int) usb_device.bus_number = 1 (0x1) (int) info.product = 'USB Flash Memory' (string) usb_device.product = 'USB Flash Memory' (string) info.vendor = 'Toshiba Corp.' (string) usb_device.vendor = 'Toshiba Corp.' (string) usb_device.vendor_id = 2352 (0x930) (int) usb_device.product_id = 25884 (0x651c) (int) usb_device.serial = '0800F15032527B91' (string) usb_device.can_wake_up = false (bool) usb_device.is_self_powered = false (bool) usb_device.device_revision_bcd = 256 (0x100) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.max_power = 200 (0xc8) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_class = 0 (0x0) (int) usb_device.configuration_value = 1 (0x1) (int) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_206_-1_0000:00:1f.2' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) info.bus = 'usb_device' (string)
to by melo byt asi vsechno co souvisi s flashdiskem
s sda ten sami vysledek
i pod rootem stejny problem
i pod rootem stejny problem
uz to funguje pomohlo:
# mount -t vfat -o iocharset=utf8,codepage=852 /dev/sda1 /mnt/flash/
Tiskni Sdílej: