Dotaz: ARCH_zprovozneni nvidie

[mart]

Dobry den, potrebuji radu: nedavno jsem nainstaloval arch lnx base (0.7.2) pak doinstaloval xorg,gnome,gdm a nvidii ,ale nemuzu spustit xka. /var/log/xorg tady je :

(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0):      that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0):      that the NVIDIA device files have been created properly. 
(EE) NVIDIA(0):      Please consult the NVIDIA README for details.
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

muzete mi s tim nekdo pomoci, nepomohly mi ani

nvidia-legacy

a druhy poddotaz, kde sezenu libssl , protoze prave ta mi chybi, abych mohl pouzit links, nebo lynx prohlizec primo z archu

Odpovědi

[Marek Bernát]

A xf86-video-nv vám funguje? Mohli by ste tiež pridať popis HW a xorg.conf.

libssl by sa mala nachádzať v ľubovoľnej implementácii ssl. Bežne používanou je openssl.

[Marek Bernát]

Hm, ešte pridám, že v Arch Linux je program elinks, stačí vám nainštalovať ten.

[Marek Bernát]

A ešte pridám, prečítajte si man pacman a ako prvé sa naučte pacman -Ss, ten by vám ten links našiel.

[ch-in-A]

libssl je soucasti openssl http://www.archlinux.org/packages/files/4138/

co mate za nvidii?...me satcilo nainstalovat xorg a balik nvidia jelo to. mam gf mx440

[kozzi]

takze jakou grafickou kartu presne mas hod sem tvuj xorg.conf jaky jadro pouzivas. A co tak zadat pacman -Sy openssl taky je dobre zadat pacman -Sy gnome gnome-extra

[Marek Bernát]

Ale on nechce ssl. On chce links. A ten update gnome mu IMO nijak nepomôže, ale pre mňa za mňa.

[kozzi]

no to stim gnome jsem zadal jen kvuli tomu ze nevim jak presne tam to gnome cpal kdyz tak koukam tak o pacmanovi nic nevi. Takto to je jisty ze tam ma vse. No a na ssl se ptal tak jsem mu to rek.

[Jardík]

Nejprve bych asi aktualizoval systém. Ten nvidia modul je rejmě pro novější jádro.

[mart]

tak to jadro je 2.6.16arch gcc4.0.3 / gnome jsem instaloval pacman -Sy gnome , ale stejne i dalsi balicky vcetne links / nepomohlo ani elinks - porad hlasilo, ze chybi knihovna libssl , tak jsem nainstaloval openssl a uz links jede xorg jsem zkousel vygenerovat nekolika zpusoby /hwd -xa ; Xorg -configure i xorgconfig a nic , poslu ho za chvili/ jinak grafika je GF 5200

[kozzi]

no tak pokud jsi aktualizoval tak musis mit jadro 2.6.17.6

[ch-in-A]

jak pravi instalacni howto archu.

1. stahnout minimal cd a nainstalovat

2. pacman -Syu - vyupdatovat to co ze z minimal cd instalace nainstalovalo

3. zacit instalovat dalsi veci z netu

[mart]

muj xorg:

Section "ServerLayout"
	Identifier     "Xorg Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection

Section "ServerFlags"
	Option "AllowMouseOpenFail"  "true"
	
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
#	FontPath     "/usr/share/fonts/misc:unscaled"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/100dpi"
	FontPath     "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
	FontPath     "/usr/share/fonts/cyrillic"
#	FontPath     "/usr/share/lib/X11/fonts/latin2/75dpi"
#	FontPath     "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/ttf/western"
	FontPath     "/usr/share/fonts/ttf/decoratives"
	FontPath     "/usr/share/fonts/truetype"
	FontPath     "/usr/share/fonts/truetype/openoffice"
	FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
	FontPath     "/usr/share/fonts/latex-ttf-fonts"
	FontPath     "/usr/share/fonts/defoma/CID"
	FontPath     "/usr/share/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
	Load  "dbe"
#      Load  "dri"
	Load  "extmod"
	Load  "glx"
        Load  "bitmap" # bitmap-fonts
	Load  "type1"
	Load  "freetype"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
        Option      "CoreKeyboard"
	Option "XkbRules" "xorg"
	Option "XkbModel" "pc105"
	Option "XkbLayout" ""
	Option "XkbVariant" ""
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse"
	Driver      "mouse"
	Option      "Protocol" "Microsoft"
	Option      "Device" "/dev/ttyS0"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
	Identifier  "PS/2 Mouse"
	Driver      "mouse"
	Option      "Protocol" "auto"
	Option          "ZAxisMapping"          "4 5"
	Option      "Device" "/dev/psaux"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
	Option		"SendCoreEvents"	"true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by Archie mkxcfg

Section "Monitor"
	Identifier "Monitor0"
		Option "DPMS" "true"
#	HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
	HorizSync    30.0 - 96.0 # Warning: This may fry old Monitors
	VertRefresh  50.0 - 160.0 # Very conservative. May flicker.
#	VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
	#  Default modes distilled from
	#      "VESA and Industry Standards and Guide for Computer Display Monitor
	#       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
	#  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
	# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "640x350"    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
	# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "640x400"    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
	# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "720x400"    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
	# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
	ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
	# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
	ModeLine "640x480"    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
	# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
	ModeLine "640x480"    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
	# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
	ModeLine "640x480"    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
	# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
	ModeLine "800x600"    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
	# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
	ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
	# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
	ModeLine "800x600"    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
	# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
	ModeLine "800x600"    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
	# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
	ModeLine "800x600"    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
	# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
	ModeLine "1024x768"   44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
	# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
	ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
	# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
	ModeLine "1024x768"   75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
	# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
	ModeLine "1024x768"   78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
	# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
	ModeLine "1024x768"   94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
	# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
	ModeLine "1152x864"  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
	# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
	ModeLine "1280x960"  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
	# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
	ModeLine "1280x960"  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
	# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
	ModeLine "1280x1024" 108.0 1280 1328 1440 1688   1024 1025 1028 1066 +hsync +vsync
	# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
	ModeLine "1280x1024" 135.0 1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
	# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
	ModeLine "1280x1024" 157.5 1280 1344 1504 1728   1024 1025 1028 1072 +hsync +vsync
	# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
	ModeLine "1600x1200" 162.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
	ModeLine "1600x1200" 175.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
	ModeLine "1600x1200" 189.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
	ModeLine "1600x1200" 202.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
	ModeLine "1600x1200" 229.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
	ModeLine "1792x1344" 204.8 1792 1920 2120 2448   1344 1345 1348 1394 -hsync +vsync
	# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
	ModeLine "1792x1344" 261.0 1792 1888 2104 2456   1344 1345 1348 1417 -hsync +vsync
	# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
	ModeLine "1856x1392" 218.3 1856 1952 2176 2528   1392 1393 1396 1439 -hsync +vsync
	# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
	ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 -hsync +vsync
	# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
	ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 -hsync +vsync
	# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
	ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 -hsync +vsync
	# Additional modelines
	ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
	ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
	# Extended modelines with GTF timings
	# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
	ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
	# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
	ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
	# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
	ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
	# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
	ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
	# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
	ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
	# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
	ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
	# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
	ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
	# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
	ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
	# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
	ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
	# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
	ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
	# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
	ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
	# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
	ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
	# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
	ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
	# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
	ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
	# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
	ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
	# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
	ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
	# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
	ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
	# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
	ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
	# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
	ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
	# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
	ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
	# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
	ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
EndSection

# Auto-generated by Archie mkxcfg

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	VendorName  "All"
	BoardName   "All"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultColorDepth 16
	SubSection "Display"
		Depth     1
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

#Section "DRI"
#Mode 0666
#EndSection

font path uz jsem zakomentoval, protoze mi to u nej hlasilo nejakou chybu , pak je editovano horyzont a vertikal refresh a device driver a section dri

[kozzi]

takze odinstaluj vsechny drivery(nvidia) co tam mas prikazem pacman -R nvidia(-legacy). Potom zadej

pacman -Sy nvidia nvidia-utils kernel26

no a pak nahrad tvuj /etc/X11/xorg.conf timto:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "speedo"
    Load        "freetype"
    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/75dpi"
    FontPath   "/usr/share/fonts/100dpi"
    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/Type1"
#    FontPath   "/usr/lib/X11/fonts/local/"
    FontPath   "/usr/share/fonts/misc"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/share/fonts/speedo"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/share/fonts/75dpi"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the  VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the  server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the  mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc105"
    Option "XkbLayout"  "cz"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"       # PS/2 Mouse
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5-97.3

#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-150

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks     25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "** NVIDIA (generic)                   [nv]"
    Driver      "nvidia"
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "** NVIDIA (generic)                   [nv]"
    Monitor     "My Monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

no a je to ted staci upravit /etc/inittab tak aby defaultne staroval do runlevel 5 a jeste smazat radek ohledne xdm a v /etc/rc.conf pridat to oblasti DAEMONS gdm

[Tommassino]

ja sem nvidii na arch zprovoznil velmi snadno a podle vaší chybové hlášky bych soudil že jste zappomněl přidat do /etc/rc.conf načítaní modulu nvidi toto byste tam měl mít v sekci HARDWARE: MODULES=(nvidia)

[kozzi]

to tam byt nemusí

[mart]

pacman -Syu skoncil konfliktni chybovou hlaskou_ kernel26:/lib/modules/2.6.17arch/modules.alias: exist in filesystem a tech modulu tam je nekolik snad 10-15 diky tomu nejde nainstalovat ani nvidia nvidia-utils kernel26 budu pokracovat zase zitra ?uz neudrzim vicka :)

[kozzi]

zadej pacman -Syu --force to to opravi

[ch-in-A]

nechci vypadat jako hnidopich ale myslim ze by bylo lepsi vkladat sve xorg.confy, poku maji vychozi mnozstvi komentaru, nejak prehlednejc. co treba

grep -v ^# /etc/X11/xorg.conf

[kozzi]

no přiznám že jsem to nejak podobne chtel udelat jen jsem nevedel jak zaridit aby se smazali jen ty co potrebuju

[mart]

Nevim, mozna, ze nejednoduchsi cesta je to preinstalovat.. kupi se totiz problem na problem, takze: po pacman -Syu -force jsem doinstaloval nvidia nvidia-utils kernel26 , pak jsem editoval xorg_ktery nejel, ani xorg kozziho nefachci, vyskakuje mi chyba se server layout, tak jsem si nechal vygenerovat novy pomoci hwd -xa , upravil ho a rebootnul, pak problikla nvidia (takze ovladac jede), jenze zase chyba s /etc/X11/xinit/xinitrc (radek 28 -twm;29-xclock;32-exec) jsem zakomentoval , nakonec vlastne vsechny od radku 28, upravil inittab , rebootnu . Problikla nvidia, najelo gdm, chci se prihlasit jako user a zase chyba xsession , takze : /.xsession-errors

/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:0.Xservers" -h "" -l ":0" "mart"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: Cannot find Xclients
/opt/gnome/etc/gdm/Xsession: ssh-agent not found!
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: xsm
/opt/gnome/etc/gdm/Xsession: line 238: exec: xsm: not found

mate jeste nejake napady? ja uz tomu nerozumim...

[kozzi]

mam pocit ze to mas pekne zasrany. Takze by mozna fakt neuskodilo to preinstalit.

[Marek Bernát]

Skús nainštalovať xorg-xsm

[Marek Bernát]

Ups, nejako som mimo. Toto malo ísť o jeden post vyššie

No ale, nedá mi to: nevzdávaj sa, snaž sa pochopiť chybové hlášky a hľadať na fóre, aspoň sa niečo naučíš. Reinštalácia je hlúpy zvyk z windowsu, v linuxe nič také prakticky nikdy netreba. Ak si teda totálne nezničíš zámerne systém, ale nič také si nespravil…

[ch-in-A]

zda se ze nemas nastavene to gnome v xinitrc...tipuju

kdyz uz jsi to dotahnul az sem, tak by bylo skoda to preinstalovat, ne z pohledu systemu ale z pohledu uzivatele ktery nabira zkusenosti s instalaci.

myslim ze bys mel vyhledat /etc/X11/xinit/xinitrc - globalni

nebo ~/.xinitrc pro daneho uzivatele a tam zapracovat

nevim co tam ma byt pro spusteni gnome...myslim ze neco exec gnome-session nebo asi tak neco....pouzivam icewm.

[kozzi]

no já mám arch a jediný co jsem, pro zprovozneni gnome musel udelat bylo to že v gdm jsem si vybral jako session gnome a bylo nic nikam zapisovat nemusi

[otula]

A já doplním kozziho, že gdm se spustí automaticky tak, že v /etc/inittab se nastaví

id:5:initdefault:

a úplně na konci

x:5:respawn:/opt/gnome/sbin/gdm -nodaemon

Samozřejmě nesmí předtím zapomenout na pacman -S gdm

[Marek Bernát]

Hm, nepoužívam desktop managerov, ale nie je to tak, že gdm je démon ako každý iný a stačí ho pridať do /etc/rc.conf? Do inittabu by IMHO nováčik zbytočne šahať nemal…

[otula]

Ano, stačí ho přidat do rc.conf. Ale nastavit v inittab runlevel 5 mi přijde tak nějak standardnější - aspoň jsem to tak za pár let vycítil, tak mne prosím nekamenujte

[kozzi]

nekamenuje te za ten init5 ale za ten druhej radek ten tam vubec byt nemusi pokud je gdm v sekci daemons

[Marek Bernát]

To je predsa pre začínajúce ho používateľa jedno, stačia mu dva runlevely 1: single, 2: multi. Ak od toho bude chcieť niečo viac, tak si naštuduje manuál a nastaví si to, ako bude potrebovať.

[mart]

Uz me nebavilo si s tim hrat druhy den, tak jsem to behem 3 hodin preinstaloval a zatim vsechno jede, vcetne nvidie, ale nevim, kde jsem udelal chybu pri prvni instalaci, snad, ze jsem neaktualizoval system po nainstalovani BASE. Mam ted jen takove malickosti ...upravit rozliseni gdm pred prihlasenim / jako user to mam nastaveno. A jeste , existuje neco grafickeho na upravu a prirazeni uzivatelu do skupin pod gnome?

Ale jinak DIKY vsem , co prispeli do tohoto fora.

[kozzi]

takze to rozliseni gdm by melo byt stejne jako u uzivatel kdyztak jsem hod tvuj xorg.conf jo a ohledne tech skupin a useru tak na to si nainstaluj gst prikazem pacman -Sy gnome-system-tools akorat musis mit povolenej unstable to udelas v souboru /etc/pacman.conf - proste to tam odkomentuj asi takto:

[unstable]
Include = /etc/pacman.d/unstable

[mart]

rozliseni jsem vyresil editaci xorg (smazanim dlouheho vypisu modeline v sekci monitor)

jen mi jeste prozradte jak dohledavate balicky, a treba chybejici knihovny (pokud se mi stane neco jako pri prvni instalaci s tim links_em a chybejici libssl)

treba amarok pacman nenajde, tak jsem zkusil

pacman -Ss amarok

a ten nasel amarok-base, tak tedy to shrnu, jsou nejake problemy s balicky? popr jak je resite?to je otazek co? ale zda se , ze pacman jede jako das :)

[Marek Bernát]

-Ss podporuje regulárne výrazy a vyhľadáva aj v popisoch, takže je len malá šanca, že nenájdete, čo hľadáte. Ak sa tak napriek tomu stane, máte možnosť pridať repozitár balíčkov (napríklad unstable, ktorý spomínal kozzi, ale to ja nedoporučujem; čo doporučujem je community). -Ss potom bude hľadať aj tam. A nakoniec je tu AUR, odkiaľ môžete sťahovať balíčky pridané komunitou. Prípadne ich pridávať sám, nie je to nič zložité.

Každopádne si prečítajte tieto inštrukcie, hlavne časť 15, ale zíde sa vám to celé. Prajem veľa zdaru

[kozzi]

no řeknu to tak pokud si zapneš community repositare tak bude jen malo balicku ktere nebudes mit k dispozici. Ty doinstalujes tak ze zandes na aur.archlinux.org/packages.php a do vyhledavani zadas nazev balicku ktery chces. pokud ho najde(coz je pravdepodobne) tak si ztahnes tarball ten rozbalis do /usr/abs/local/ potom v konzoli vlezes do rozbaleneho tarballu a zadas makepkg (samozrejme jako root) to ti vygeneruje balicek ten pak nainstalujes prikazem pacman -U nazev_balicku.tar.pkg.gz. No a je to. Jinak vyroba balicku je taky snadna.

[ch-in-A]

kdyz uz jsme u baliku, obcas je v uzivatelskem repozitari jenom cvs cesta. existuje nejaky pohodlny zpusob jak si stahnout ty veci z cvs na disk?

ja to delam tak, ze si rucne vytvorim pres schranku soubory z weboveho cvs rozhrani...coz me moc nebavi..

[kozzi]

pockat to vypada ze jsi nepochopil jak to funguje v tom uzivatelskym repozitari si nemas klikat na ten odkaz (at uz to je tarball nebo cvs) ale mas kliko¨nout na ten odkaz pojmenovany tarball(vedle neho je napsano files a vedle toho je PKGBUILD) takze stahnout ten tarball ale ne zdroje. no a postupovat tak jakjsem psal proste ho rozbalit vlez do toho rozbaleneho a jako root zadat makepkg -s (-ten parametr -s zname ze kdyz chybi nejaky zavislosti tak se automaticky stahnou.) jo a jinak pokud chces stahovat neco z cvs tak se to nedali pres web ale pomoci programu cvs

  cvs :pserver:cvs:cvs@cvs.winehq.org:/home/wine login
  cvs -z3 -d :pserver:cvs:cvs@cvs.winehq.org:/home/wine co wine

tak takle se to pouziva nejak na kazdych strankach kde si muzes stahnout neco pres cvs je navod