Dotaz: leadtek winfast 2000 - spatny zvuk

[ufon_68]

Ahoj lidi, asi uz jste pro me posledni zachrana, mam problemy se zvukem na teto karte. Obraz jde dobre, ovsem misto zvuku slysim jakesi divne chrceni mezi kterym misty zaslechnu zvuk z tv, zkousel sem celou radu nastaveni modulu bttv konkretne tuneru(asi 15 cisel, nemuzu ted najit svoje poznamky ale urcite sem zkousel tuner=38,24,5 a dalsi), obraz ziskam jen na par z nich ovsem vsechny maji stejny problem se zvukem. Pouzivam program Tvtime, pokud menim zvukovou normu primo v programu tak to nema na vyslednem zvuku naprosto zadny efekt, chytam(analog signal) na celkem spatnou antenu ale win mi jede zvuk naprosto krasne. Nevim ted presne v cem spociva problem, pokud je to v nastaveni ovladace, v nastaveni tvtime, nebo v necem uplne jinem.

 dmesg | grep bttv
[17179595.868000] bttv: driver version 0.9.16 loaded
[17179595.868000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179595.868000] bttv: Bt8xx card found (0).
[17179595.868000] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 193, latency: 32, mmio: 0xfa020000
[17179595.868000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[17179595.868000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
[17179595.868000] bttv0: gpio: en=00000000, out=00000000 in=003ff500 [init]
[17179595.872000] bttv0: using tuner=24
[17179595.872000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[17179595.872000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[17179595.876000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[17179595.876000] bttv0: i2c: checking for TDA9887 @ 0x86... found
[17179596.068000] bttv0: registered device video0
[17179596.068000] bttv0: registered device vbi0
[17179596.068000] bttv0: registered device radio0
[17179596.068000] bttv0: PLL: 28636363 => 35468950 .<4>nvidia: module license 'NVIDIA' taints kernel.
[17179596.104000] bttv0: add subdevice "remote0"

-------------------------------------------------------------------------------------------------

 dmesg | grep tuner
[17179595.872000] bttv0: using tuner=24
[17179596.036000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[17179596.036000] tuner 0-0061: type set to 24 (Philips PAL/SECAM multi (FQ1216ME))
[17179596.036000] tuner 0-0063: chip found @ 0xc6 (bt878 #0 [sw])

Na otázku zatím nikdo bohužel neodpověděl.