Dotaz: Konfigurace PPPoE pripojeni s USB modemem

[Stoyan]

Dobry den, pouzivam Kubuntu 7.04. Mam USB modem a chtel bych se pripojit na internet. Modem jsem jiz zprovoznil a potrebuji nyni nakonfigurovat pripojeni. Muj provider jede pres PPPoE, proto jsem zkusil utilitku pppoeconf - ta vsak hleda pouze zarizeni pripojene k sitove karte, tudiz muj usb modem nenajde. Mate nejake napady co s tim?

Odpovědi

[kozzi]

No, utilita pppoeconf hleda eth zarizeni, a i kdyz tvuj modem je pripojen pres usb tak by mel vytvaret eth0 ci dsl0 ci nejake podobne rozhrani, ktere se pak da nastavit pomoci pppoeconf. Ojakej presnej typ USB modemu jde, jakou verzi jadra pouzivas. Co znamena ze jsi usb modem rozchodil, podle jakyho potupu?

[Stoyan]

Jedna se o modem Zyxel Prestige 630. Obe diody na modemu sviti a ve vypisu dmesg vidim rychlost linky - to podle navodu znamena, ze modem funguje. V Kubuntu 7.04 je verze jadra 2.6.20.

[kozzi]

No to neni uplne presnej nazev, ja potrebuju celej nazev a typ chipsetu. Podle toho zjistim jaky ovladac se pouziva a jak se nastavuje jinak pokud se pouziva ovladac eciadsl tak by se vse melo dat nastavit dle navodu: http://eciadsl.flashtux.org/tutorial.php

[Stoyan]

Je to ADSL USB modem Zyxel Prestige 630 C-3 s chipsetem Conexant AccessRunner.

[kozzi]

JJ ovladac pro tento modem je uz v jadre, ale take k nemu potrebujes firmware, mas ho nainstalovanej?

[Stoyan]

Firmware nainstalovany nemam. Ridil jsem se timto navodem (Faze1) Presneji touto casti:

"Aby připojení vůbec mohlo fungovat, je potřeba nejdřív nabootovat do Windows, kde byste měli mít daný modem nainstalovaný. Ve Windows by se modem měl chytit, tj. obě diody by měly zůstat svítit. Pak přebootujte do Ubuntu a modem se chytí i tam. Důvodem je to, že v Ubuntu není z licenčních důvodů k dispozici už od začátku firmware modemu, který je nutný, aby se modem chytil sám. Boot do Windows způsobí, že se modem inicializuje a firmware pak není v Linuxu potřeba."

[kozzi]

Toto je mozna sice taky reseni ale me osobne prijde mnohem jistejsi pouzit ten firmware. Stahni si ho z http://kozzi.php5.cz/cxacru-fw.bin a nakopiruj ho do /lib/firmware mozna pokud tam mas v /lib/firmware nejakou dalsi slozku tak to nakopirovat i do ni.

[Stoyan]

Diky, nakopiroval jsem to tam a jediny co se zmenilo je ze ten modem sviti i kdyz nabootuju rovnou do Kubuntu. V pppoeconf ale porad vidim jen eth0 a eth0:evac ale zadny dsl0:/

[kozzi]

Jo no alspon neco, a v /dev se ty nejaky zarizeni vytvorilo? Jinak nasel jsem navod neni sice primo pro pppoe ale mozna by mohl fungovat s par zmenama http://www.fi.muni.cz/~xtalas1/zyxel/navod.txt

[Stoyan]

V /dev se myslim nic nevytvorilo, neni tam asi dsl0 ani modem ani nic podobnyho. Ten navod jsem zkousel, postupoval jsem presne podle nej a kdyz jsem se pripojil (pppd call bluetone) internet porad nefunguje. Ani pingovani. V souboru pppd.log je toto:

Using interface ppp0 Connect: ppp0 <--> 8.48 LCP: timeout sending Config-Request Connection terminated Modem hangup

Nejak nechapu tento radek:

plugin pppoatm.so 8.48 # pri pppoe se tak asi bude jmenovat i ten soubor...

Ja mam pppoe, jak mam tedy nazvat ten soubor? I tak se mi ta konfigurace pripojeni zda ponekud slozita kdyz je v linuxu primo pppoeconf, ne?:)

[Stoyan]

Poradis prosim? Nechci kvuli tomu kupovat novy modem:(

[kozzi]

Pokud se ti nevytvorilo v /dev zarizeni dsl0 ani tomu nic podobne tak to jeste nemusi nic znamenat, co ti vypise prikaz ifconfig? Jo a ho ¨d jsem prosim vypis z dmesg

[Stoyan]

No ja bych rad, ale nevim jak. Z kubuntu to na web hodit nemuzu pre nefunguje internet. Z Kubuntu to taky nemuzu zapsat na NTFS disk a z windows se na linuxovy disk nedostanu. Jak to tedy mohu udelat aniz bych to musel opisovat rucne?

[miso]

usb flash?

[boar]

uprav si fstab, a pouzij na ntfs ovladac ntfs-3g

nebo si v tom druhym operacnim systemu stahni plugin do totalcommandera, kterej umi prochazet ext3/reiserfs disky.

[michal085]

Kde bych prosim sehnal ten plugin pro TC7? Nasel jsem jen plugin pro ext2 ale zadny pro ext3. Dekuji

[boar]

ext3 = ext2 + journall (nebo jak to napsat cesky :P ) takze pouzij ten. netusim, zda je i pod tc7,

[Stoyan]

ifconfig:

stoyan@stoyanpc:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0A:CD:0C:45:AA
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16 Base address:0x6f00

eth0:avah Link encap:Ethernet  HWaddr 00:0A:CD:0C:45:AA
          inet addr:169.254.6.47  Bcast:169.254.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          Interrupt:16 Base address:0x6f00

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:668 (668.0 b)  TX bytes:668 (668.0 b)

stoyan@stoyanpc:~$

dmesg:

stoyan@stoyanpc:~$ dmesg
[    0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2
(Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.2
7-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 en
d: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 en
d: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 en
d: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000002fef0000 en
d: 000000002fff0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000002fff0000 size: 0000000000008000 en
d: 000000002fff8000 type: 3
[    0.000000] copy_e820_map() start: 000000002fff8000 size: 0000000000008000 en
d: 0000000030000000 type: 4
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 en
d: 00000000fec01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 en
d: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 en
d: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[    0.000000]  BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
[    0.000000]  BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 767MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fb940
[    0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   196592
[    0.000000]   HighMem    196592 ->   196592
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   196592
[    0.000000] On node 0 totalpages: 196592
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1503 pages used for memmap
[    0.000000]   Normal zone: 190993 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 AMI                                   ) @ 0x000f
a8f0
[    0.000000] ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x
2fff0000
[    0.000000] ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x
2fff0030
[    0.000000] ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x
2fff00c0
[    0.000000] ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x
00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:8 APIC version 16
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec0
0000)
[    0.000000] Detected 1466.826 MHz processor.
[   15.877049] Built 1 zonelists.  Total pages: 195057
[   15.877054] Kernel command line: root=UUID=186f47d0-9e39-4064-885a-530d999f0b
8c ro quiet splash
[   15.877276] mapped APIC to ffffd000 (fee00000)
[   15.877279] mapped IOAPIC to ffffc000 (fec00000)
[   15.877283] Enabling fast FPU save and restore... done.
[   15.877287] Enabling unmasked SIMD FPU exception support... done.
[   15.877300] Initializing CPU#0
[   15.877381] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   15.878695] Console: colour VGA+ 80x25
[   15.879591] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   15.881160] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   15.908423] Memory: 768064k/786368k available (1992k kernel code, 17640k rese
rved, 893k data, 328k init, 0k highmem)
[   15.908437] virtual kernel memory layout:
[   15.908439]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   15.908440]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   15.908442]     vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
[   15.908444]     lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
[   15.908445]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)
[   15.908447]       .data : 0xc02f2264 - 0xc03d16d4   ( 893 kB)
[   15.908449]       .text : 0xc0100000 - 0xc02f2264   (1992 kB)
[   15.908453] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[   15.985370] Calibrating delay using timer specific routine.. 2936.48 BogoMIPS
 (lpj=5872963)
[   15.985430] Security Framework v1.0.0 initialized
[   15.985439] SELinux:  Disabled at boot.
[   15.985463] Mount-cache hash table entries: 512
[   15.985665] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 000
00000 00000000 00000000 00000000
[   15.985677] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   15.985680] CPU: L2 Cache: 256K (64 bytes/line)
[   15.985684] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 0
0000000 00000000 00000000
[   15.985698] Compat vDSO mapped to ffffe000.
[   15.985705] Remapping vsyscall page to ffffe000
[   15.985718] Checking 'hlt' instruction... OK.
[   16.001529] SMP alternatives: switching to UP code
[   16.001845] Freeing SMP alternatives: 11k freed
[   16.002178] Early unpacking initramfs... done
[   16.420565] ACPI: Core revision 20060707
[   16.424586] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[   16.426861] CPU0: AMD Athlon(tm) XP 1700+ stepping 00
[   16.426890] Total of 1 processors activated (2936.48 BogoMIPS).
[   16.427618] ENABLING IO-APIC IRQs
[   16.427937] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   16.573345] Brought up 1 CPUs
[   16.573705] Booting paravirtualized kernel on bare hardware
[   16.573812] Time: 17:39:58  Date: 06/25/107
[   16.573859] NET: Registered protocol family 16
[   16.573999] EISA bus registered
[   16.574005] ACPI: bus type pci registered
[   16.581607] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
[   16.581611] PCI: Using configuration type 1
[   16.581613] Setting up standard PCI resources
[   16.596495] ACPI: Interpreter enabled
[   16.596502] ACPI: Using IOAPIC for interrupt routing
[   16.597064] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   16.597071] PCI: Probing PCI hardware (bus 00)
[   16.598416] PCI quirk: region 0800-087f claimed by vt8235 PM
[   16.598422] PCI quirk: region 0400-040f claimed by vt8235 SMB
[   16.598625] Boot video device is 0000:01:00.0
[   16.598672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   16.623345] ACPI: Power Resource [URP1] (off)
[   16.623431] ACPI: Power Resource [URP2] (off)
[   16.623515] ACPI: Power Resource [FDDP] (off)
[   16.623601] ACPI: Power Resource [LPTP] (off)
[   16.625695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   16.626004] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.626315] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   16.626619] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   16.626819] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.626836] pnp: PnP ACPI init
[   16.631459] pnp: PnP ACPI: found 12 devices
[   16.631466] PnPBIOS: Disabled by ACPI PNP
[   16.631556] PCI: Using ACPI for IRQ routing
[   16.631560] PCI: If a device doesn't work, try "pci=routeirq".  If it helps,
post a report
[   16.633651] NET: Registered protocol family 8
[   16.633654] NET: Registered protocol family 20
[   16.634176] PCI: Bridge: 0000:00:01.0
[   16.634179]   IO window: disabled.
[   16.634185]   MEM window: dde00000-dfefffff
[   16.634190]   PREFETCH window: bdc00000-ddcfffff
[   16.634210] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   16.634246] NET: Registered protocol family 2
[   16.661381] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.661681] TCP established hash table entries: 131072 (order: 8, 1048576 byt
es)
[   16.663769] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   16.664820] TCP: Hash tables configured (established 131072 bind 65536)
[   16.664825] TCP reno registered
[   16.673458] checking if image is initramfs... it is
[   17.466768] Freeing initrd memory: 7007k freed
[   17.467444] audit: initializing netlink socket (disabled)
[   17.467464] audit(1185385198.668:1): initialized
[   17.467622] VFS: Disk quotas dquot_6.5.1
[   17.467647] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   17.467718] io scheduler noop registered
[   17.467722] io scheduler anticipatory registered
[   17.467725] io scheduler deadline registered
[   17.467736] io scheduler cfq registered (default)
[   17.468088] isapnp: Scanning for PnP cards...
[   17.822090] isapnp: No Plug & Play device found
[   17.861449] Real Time Clock Driver v1.12ac
[   17.861522] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[   17.861671] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.861951] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   17.862765] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.863185] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   17.863623] mice: PS/2 mouse device common for all mice
[   17.864502] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc
ksize
[   17.864893] input: Macintosh mouse button emulation as /class/input/input0
[   17.864941] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   17.864947] ide: Assuming 33MHz system bus speed for PIO modes; override with
 idebus=xx
[   17.865323] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
 1,12
[   17.867153] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.867163] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.867408] EISA: Probing bus 0 at eisa.0
[   17.867463] EISA: Detected 0 cards.
[   17.897578] TCP cubic registered
[   17.897587] NET: Registered protocol family 1
[   17.897618] Using IPI No-Shortcut mode
[   17.897704] ACPI: (supports S0 S1 S4 S5)
[   17.897758]   Magic number: 15:819:694
[   17.898456] Freeing unused kernel memory: 328k freed
[   17.901055] Time: tsc clocksource has been installed.
[   17.913407] input: AT Translated Set 2 keyboard as /class/input/input1
[   19.213784] Capability LSM initialized
[   19.268395] ACPI: Processor [CPU1] (supports 16 throttling states)
[   19.946796] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.946841] 8139cp 0000:00:06.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[   19.946845] 8139cp 0000:00:06.0: Try the "8139too" driver instead.
[   19.949470] 8139too Fast Ethernet driver 0.9.28
[   19.949533] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ
 16
[   19.949859] eth0: RealTek RTL8139 at 0xf0846f00, 00:0a:cd:0c:45:aa, IRQ 16
[   19.949863] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   19.996939] usbcore: registered new interface driver usbfs
[   19.996973] usbcore: registered new interface driver hub
[   19.997012] usbcore: registered new device driver usb
[   19.998262] USB Universal Host Controller Interface driver v3.0
[   19.998355] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ
 17
[   19.998370] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   19.998571] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus numbe
r 1
[   19.998610] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000dc00
[   19.998779] usb usb1: configuration #1 chosen from 1 choice
[   19.998816] hub 1-0:1.0: USB hub found
[   19.998830] hub 1-0:1.0: 2 ports detected
[   20.104838] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ
 17
[   20.104856] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   20.104889] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus numbe
r 2
[   20.104919] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
[   20.105074] usb usb2: configuration #1 chosen from 1 choice
[   20.105112] hub 2-0:1.0: USB hub found
[   20.105126] hub 2-0:1.0: 2 ports detected
[   20.131879] Floppy drive(s): fd0 is 1.44M
[   20.212797] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ
 17
[   20.212815] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   20.212852] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus numbe
r 3
[   20.212882] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000e400
[   20.213017] usb usb3: configuration #1 chosen from 1 choice
[   20.213053] hub 3-0:1.0: USB hub found
[   20.213067] hub 3-0:1.0: 2 ports detected
[   20.218354] FDC 0 is a post-1991 82077
[   20.323405] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[   20.323435] ACPI: Unable to derive IRQ for device 0000:00:11.1
[   20.323439] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[   20.323455] VP_IDE: chipset revision 6
[   20.323458] VP_IDE: not 100% native mode: will probe irqs later
[   20.323471] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:
11.1
[   20.323483]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DM
A
[   20.323499]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DM
A
[   20.323511] Probing IDE interface ide0...
[   20.348577] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   20.539584] usb 1-1: configuration #1 chosen from 1 choice
[   20.748576] hda: Maxtor 6E030L0, ATA DISK drive
[   21.032515] hdb: Maxtor 6B200P0, ATA DISK drive
[   21.095649] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   21.118408] Probing IDE interface ide1...
[   21.988330] hdc: TEAC CD-W552G, ATAPI CD/DVD-ROM drive
[   22.776178] hdd: HL-DT-STDVD-RAM GSA-H20L, ATAPI CD/DVD-ROM drive
[   22.832850] ide1 at 0x170-0x177,0x376 on irq 15
[   22.836111] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ
 17
[   22.836130] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   22.836331] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus numbe
r 4
[   22.836391] ehci_hcd 0000:00:10.3: irq 17, io mem 0xdffffe00
[   22.836399] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[   22.837114] usb usb4: configuration #1 chosen from 1 choice
[   22.837409] hub 4-0:1.0: USB hub found
[   22.837429] hub 4-0:1.0: 6 ports detected
[   22.880099] usb 1-1: USB disconnect, address 2
[   22.952536] SCSI subsystem initialized
[   22.959414] libata version 2.20 loaded.
[   22.970001] hda: max request size: 128KiB
[   22.990577] hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63
, UDMA(133)
[   22.990724] hda: cache flushes supported
[   22.990797]  hda: hda1 hda2 < hda5 >
[   23.028093] hdb: max request size: 512KiB
[   23.029593] hdb: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255
/63, UDMA(133)
[   23.031155] hdb: cache flushes supported
[   23.031195]  hdb: hdb1 hdb2 hdb3
[   23.097280] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[   23.097294] Uniform CD-ROM driver Revision: 3.20
[   23.126739] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDM
A(33)
[   23.483882] Attempting manual resume
[   23.483888] swsusp: Resume From Partition 3:67
[   23.483891] PM: Checking swsusp image.
[   23.484135] PM: Resume from disk failed.
[   23.533636] kjournald starting.  Commit interval 5 seconds
[   23.533655] EXT3-fs: mounted filesystem with ordered data mode.
[   23.623938] usb 1-1: new full speed USB device using uhci_hcd and address 3
[   23.814308] usb 1-1: configuration #1 chosen from 1 choice
[   31.569676] eth0: link down
[   33.000477] NET: Registered protocol family 17
[   33.823413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.826906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.523690] Linux agpgart interface v0.102 (c) Dave Jones
[   34.533877] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[   34.542837] agpgart: AGP aperture is 128M @ 0xe0000000
[   34.771021] input: PC Speaker as /class/input/input2
[   34.796328] parport: PnPBIOS parport detected.
[   34.796445] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE
,COMPAT,EPP,ECP,DMA]
[   34.819923] irda_init()
[   34.819954] NET: Registered protocol family 23
[   35.479928] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[   35.579733] usbcore: registered new interface driver cxacru
[   35.740584] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ
 18
[   35.740734] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   36.481833] fuse init (API version 7.8)
[   36.505379] lp0: using parport0 (interrupt-driven).
[   36.551661] Adding 473908k swap on /dev/disk/by-uuid/a25fd2be-d7a4-4d30-b2f6-
bdde576b5d53.  Priority:-1 extents:1 across:473908k
[   36.728127] EXT3 FS on hdb2, internal journal
[   37.099518] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   37.160775] NTFS volume version 3.1.
[   37.205922] NTFS volume version 3.1.
[   37.253410] NTFS volume version 3.1.
[   42.980563] No dock devices found.
[   43.071692] input: Power Button (FF) as /class/input/input4
[   43.078384] ACPI: Power Button (FF) [PWRF]
[   43.127595] input: Power Button (CM) as /class/input/input5
[   43.134372] ACPI: Power Button (CM) [PWRB]
[   43.183634] input: Sleep Button (CM) as /class/input/input6
[   43.190277] ACPI: Sleep Button (CM) [SLPB]
[   43.232326] Using specific hotkey driver
[   43.444250] ibm_acpi: ec object not found
[   43.519319] pcc_acpi: loading...
[   48.331236] ppdev: user-space parallel port driver
[   49.086195] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   49.086203] apm: overridden by ACPI.
[   49.672217] Bluetooth: Core ver 2.11
[   49.673053] NET: Registered protocol family 31
[   49.673061] Bluetooth: HCI device and connection manager initialized
[   49.673067] Bluetooth: HCI socket layer initialized
[   49.730929] Bluetooth: L2CAP ver 2.8
[   49.730937] Bluetooth: L2CAP socket layer initialized
[   49.811015] Bluetooth: RFCOMM socket layer initialized
[   49.811178] Bluetooth: RFCOMM TTY layer initialized
[   49.811183] Bluetooth: RFCOMM ver 1.8
[   50.635697] ATM dev 0: ADSL line: attempting to activate
[   55.648757] ATM dev 0: ADSL line: channel analysis
[   60.667765] ATM dev 0: ADSL line: up (2048 kb/s down | 128 kb/s up)
[   75.425418] NET: Registered protocol family 10
[   75.425993] lo: Disabled Privacy Extensions
[   75.426331] ADDRCONF(NETDEV_UP): eth0: link is not ready
stoyan@stoyanpc:~$

[boar]

udelej to, po zapojeni usbmodemu das dmesg| tail, a pak cat /proc/bus/usb/devices. to nam sem vypis

[Stoyan]

Tak uz to tu mas, nevis tedy co dal?

[Stoyan]

stoyan@stoyanpc:~$ dmesg| tail
[  159.210394] ATM dev 0: usbatm_complete: urb 0xe903a440 failed (-84)!
[  159.211391] ATM dev 0: usbatm_complete: urb 0xe903a3c0 failed (-84)!
[  159.212392] ATM dev 0: usbatm_complete: urb 0xe903a340 failed (-84)!
[  159.243062] usb 1-1: USB disconnect, address 3
[  162.894333] usb 1-2: new full speed USB device using uhci_hcd and address 4
[  163.063350] usb 1-2: configuration #1 chosen from 1 choice
[  165.420420] cxacru 1-2:1.0: found firmware cxacru-fw.bin
[  181.956823] ATM dev 0: ADSL line: attempting to activate
[  186.969882] ATM dev 0: ADSL line: channel analysis
[  191.981891] ATM dev 0: ADSL line: up (2048 kb/s down | 128 kb/s up)
stoyan@stoyanpc:~$ cat /proc/bus/usb/devices

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.20-15-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.20-15-generic uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0586 ProdID=330b Rev= 0.01
S:  Manufacturer=-
S:  Product=ADSL USB MODEM
S:  SerialNumber=11111111
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 7 Cls=00(>ifc ) Sub=00 Prot=00 Driver=cxacru
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=200ms
stoyan@stoyanpc:~$                             

[BigWrigley]

Zdravim

Nechci Vam do mluvit, ale proc probuh pro ADSL USB modem chcete pouzivat PPPoE? PPPoE je (z nazvu vyplyva) PPP over Ethernet. USB modemy vytvareji (podle typu modulu) vzdy nejake zarizeni typu /dev/ttyUSB0, /dev/ttyACM0 a pod. S timto zarizenim se komunikuje jako s modemem (seriovym portem). Zkuste nalezt nejake takoveto zarizeni v /dev, a pouzijte jej jako modem v kppp. Pro zacatek je dobre vyzkouset, jestli se s Vami modem bavi pomoci minicomu.

Mimochodem, asi Vam to uz chodi, ze? http://stoyan.ic.cz/zyxel.html

Ales

[Stoyan]

Mate pravdu ze PPPoE je PPP over Ethernet cili lan kabel, ten nazev je ale zavadejici. Ve WinXP chodim na net normalne pres PPPoE a USB modem. Modem jsem zprovoznil, ale vlastni konfiguraci pripojeni k internetu ne. Zarizeni, ktere uvadite jsem nenasel, zde je vypis adresare dev. Myslite ze neco z toho muze byt onen usb modem?

[BigWrigley]

Ve win je mozne, ze se nejak emuluje Ethernet pres USB rozhrani. Tj. zastrcite usb kabel a vznikne virtualni eth rozhrani.

Jak tak koukam, tak v /dev/nic zajimaveho neni. Co Vam vypise ifconfig -a se zapojenym modemem?

Ales

[BigWrigley]

Tak se musim trochu poopravit. Zda se, ze tenhle modem opravdu pouziva PPPoE i pres USB. Nasel jsem tyto odkazy:

http://www.linux.ie/lists/pipermail/cork/2004-July/004014.html

http://www.linuxquestions.org/questions/showthread.php?t=384593

Dobra zprava je, ze ten modem nejspis pod linuxem funguje. Zkuste to projit, mozna Vam to pomuze. Jak jsem pochopil, pomoci koniguraku a nejake skriptu se ten modem "nasetuje" a pak se pouzije PPPoE.

Ales