Microsoft zveřejnil na GitHubu zdrojové kódy MS-DOSu 4.0 pod licencí MIT. Ve stejném repozitáři se nacházejí i před lety zveřejněné zdrojové k kódy MS-DOSu 1.25 a 2.0.
Canonical vydal (email, blog, YouTube) Ubuntu 24.04 LTS Noble Numbat. Přehled novinek v poznámkách k vydání a také příspěvcích na blogu: novinky v desktopu a novinky v bezpečnosti. Vydány byly také oficiální deriváty Edubuntu, Kubuntu, Lubuntu, Ubuntu Budgie, Ubuntu Cinnamon, Ubuntu Kylin, Ubuntu MATE, Ubuntu Studio, Ubuntu Unity a Xubuntu. Jedná se o 10. LTS verzi.
Na YouTube je k dispozici videozáznam z včerejšího Czech Open Source Policy Forum 2024.
Fossil (Wikipedie) byl vydán ve verzi 2.24. Jedná se o distribuovaný systém správy verzí propojený se správou chyb, wiki stránek a blogů s integrovaným webovým rozhraním. Vše běží z jednoho jediného spustitelného souboru a uloženo je v SQLite databázi.
Byla vydána nová stabilní verze 6.7 webového prohlížeče Vivaldi (Wikipedie). Postavena je na Chromiu 124. Přehled novinek i s náhledy v příspěvku na blogu. Vypíchnout lze Spořič paměti (Memory Saver) automaticky hibernující karty, které nebyly nějakou dobu používány nebo vylepšené Odběry (Feed Reader).
OpenJS Foundation, oficiální projekt konsorcia Linux Foundation, oznámila vydání verze 22 otevřeného multiplatformního prostředí pro vývoj a běh síťových aplikací napsaných v JavaScriptu Node.js (Wikipedie). V říjnu se verze 22 stane novou aktivní LTS verzí. Podpora je plánována do dubna 2027.
Byla vydána verze 8.2 open source virtualizační platformy Proxmox VE (Proxmox Virtual Environment, Wikipedie) založené na Debianu. Přehled novinek v poznámkách k vydání a v informačním videu. Zdůrazněn je průvodce migrací hostů z VMware ESXi do Proxmoxu.
R (Wikipedie), programovací jazyk a prostředí určené pro statistickou analýzu dat a jejich grafické zobrazení, bylo vydáno ve verzi 4.4.0. Její kódové jméno je Puppy Cup.
IBM kupuje společnost HashiCorp (Terraform, Packer, Vault, Boundary, Consul, Nomad, Waypoint, Vagrant, …) za 6,4 miliardy dolarů, tj. 35 dolarů za akcii.
Byl vydán TrueNAS SCALE 24.04 “Dragonfish”. Přehled novinek této open source storage platformy postavené na Debianu v poznámkách k vydání.
31.10.2007 20:45
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
Ahoj, po instalaci openSUSE 10.3 mi nefunguje indikator baterie. Tedy, ze OS si stale mysli, ze jsem pripojen k el. siti, i kdyz jedu z baterky. V Ubuntu mi to fungovalo v pohode, takze problem bude nekde v distribuci. Rad bych podal blizsi informace, ale nevim konkretne co by pomohlo, takze kdyztak dodam pozdeji na vyzadani. Dik za pomoc.
Jinak mam ACER TravelMate 4501WLMi http://www.abclinuxu.cz/hardware/sestavy/notebooky/acer/acer-travelmate-4501wlmi .
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
modprobe sbs, respektive co napíše lsmod | grep sbs? Co píše cat /proc/acpi/battery/*/state s odpojenou, zapojenou baterií. A totéž i pro soubor /proc/acpi/battery/*/info ale jen se zapojenou materií.
1.11.2007 08:12
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
Ahoj, tak to lsmod | grep sbs mi v konzoli vyhodi todle: sbs 22664 0
Co se tyce toho cat /proc/acpi/battery/*/state a /proc/acpi/battery/*/info tak v adresari battery nic nemam. Jako dukaz tady hodim vypis z konsole (asi to neni prilis unixove, ale aspon ze mam jeste zkusenosti z DOSu :) ).
quimby@eduroam51-121:~> cd /proc/acpi/battery/ quimby@eduroam51-121:/proc/acpi/battery> dir celkem 0
A posledni vec. Jestli jsem zkousel modprobe sbs. Nezkousel. Ale zkusil jsem to ted a napsalo to bash: modprobe: command not found. Tak ja zkusim to mobprobe nainstalovat a pak uvidime.
1.11.2007 08:15
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
modprobe bych nainstalovane mel mit, tak nevim proc to nejde. Zkousel jsem to i jako superuzivatel a pise to to same.
1.11.2007 14:23
Ilfirin | skóre: 32
| blog: ilfblog
| Liberec
2.11.2007 11:45
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
quimby@quimby-laptop:~> su Heslo: quimby-laptop:/home/quimby # modprobe sbs quimby-laptop:/home/quimby #
a ceho jsem tim mel docilit? Protoze to nic nedela. 
battery? Pošli sem celý výpis lsmod, lspci a dmesg. Díky.
2.11.2007 12:08
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
quimby-laptop:/home/quimby # lsmod Module Size Used by af_packet 29064 4 ip6t_LOG 10496 7 nf_conntrack_ipv6 22848 4 xt_pkttype 5888 3 ipt_LOG 9984 8 xt_limit 6656 15 microcode 15372 0 snd_pcm_oss 50432 0 snd_mixer_oss 20096 1 snd_pcm_oss snd_seq 54452 0 snd_seq_device 12172 1 snd_seq ip6t_REJECT 9216 3 xt_tcpudp 7168 4 ipt_REJECT 8448 3 xt_state 6528 8 iptable_mangle 6784 0 iptable_nat 11140 0 nf_nat 21912 1 iptable_nat iptable_filter 6912 1 ip6table_mangle 6656 0 nf_conntrack_ipv4 14856 6 iptable_nat nf_conntrack 61684 5 nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 nfnetlink 9752 4 nf_conntrack_ipv6,nf_nat,nf_conntrack_ipv4,nf_conntrack ip_tables 16324 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 6784 1 ip6_tables 17476 3 ip6t_LOG,ip6table_mangle,ip6table_filter x_tables 18308 11 ip6t_LOG,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables ipv6 268152 17 nf_conntrack_ipv6,ip6t_REJECT,ip6table_mangle cpufreq_conservative 11272 0 cpufreq_userspace 8704 0 cpufreq_powersave 5888 0 acpi_cpufreq 13192 0 speedstep_lib 9220 0 apparmor 40736 0 fuse 45460 2 nls_iso8859_1 8192 1 nls_cp437 9856 1 vfat 16128 1 fat 52380 1 vfat loop 21636 0 dm_mod 56880 0 pcmcia 41076 0 snd_intel8x0 36636 1 tifm_7xx1 11392 0 ohci1394 36272 0 snd_intel8x0m 21132 1 snd_ac97_codec 97060 2 snd_intel8x0,snd_intel8x0m ac97_bus 6272 1 snd_ac97_codec ieee1394 91136 1 ohci1394 tifm_core 14084 1 tifm_7xx1 snd_pcm 82564 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec fglrx 1485740 29 snd_timer 26756 2 snd_seq,snd_pcm b44 29580 0 ipw2200 141896 0 ieee80211 35400 1 ipw2200 ieee80211_crypt 9728 1 ieee80211 firmware_class 13568 3 microcode,pcmcia,ipw2200 yenta_socket 28684 1 rsrc_nonstatic 15872 1 yenta_socket mii 9344 1 b44 pcmcia_core 40852 3 pcmcia,yenta_socket,rsrc_nonstatic sbs 22664 0 snd 58164 13 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer container 9088 0 i2c_i801 12560 0 soundcore 11460 1 snd rtc_cmos 12064 0 sr_mod 19492 0 i2c_core 27520 1 i2c_i801 snd_page_alloc 14472 3 snd_intel8x0,snd_intel8x0m,snd_pcm intel_agp 27156 1 parport_pc 40764 0 shpchp 35092 0 rtc_core 23048 1 rtc_cmos pci_hotplug 33216 1 shpchp iTCO_wdt 14372 0 cdrom 37020 1 sr_mod irda 120712 0 agpgart 35764 2 fglrx,intel_agp crc_ccitt 6144 1 irda button 12432 0 iTCO_vendor_support 7812 1 iTCO_wdt rtc_lib 7040 1 rtc_core parport 37832 1 parport_pc serio_raw 10756 0 joydev 13632 0 sg 37036 0 usbhid 41300 0 hid 29184 1 usbhid ff_memless 9352 1 usbhid sd_mod 31104 6 ehci_hcd 34956 0 uhci_hcd 27024 0 usbcore 123756 4 usbhid,ehci_hcd,uhci_hcd edd 12996 0 ext3 131976 2 mbcache 12292 1 ext3 jbd 68148 1 ext3 fan 9220 0 ata_piix 21380 5 libata 136904 1 ata_piix scsi_mod 140376 4 sr_mod,sg,sd_mod,libata thermal 19848 0 processor 40876 2 acpi_cpufreq,thermal
quimby-laptop:/home/quimby # lspci 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01) 02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller 02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller 02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
quimby-laptop:/home/quimby # dmesg
Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003feec000 (ACPI data)
BIOS-e820: 000000003feec000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 261856) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 261856
early_node_map[1] active PFN ranges
0: 0 -> 261856
On node 0 totalpages: 261856
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 253 pages used for memmap
HighMem zone: 32227 pages, LIFO batch:7
DMI present.
Using APIC driver default
ACPI: RSDP 000F62C0, 0014 (r0 ACER )
ACPI: RSDT 3FEE6205, 0030 (r1 ACER Kestrel 20021012 LTP 0)
ACPI: FACP 3FEEBF2C, 0074 (r1 ACER Kestrel 20021012 PTL 50)
ACPI: DSDT 3FEE6235, 5CF7 (r1 ACER Kestrel 20021012 MSFT 100000E)
ACPI: FACS 3FEFCFC0, 0040
ACPI: HPET 3FEEBFA0, 0038 (r1 ACER Kestrel 20021012 PTL 0)
ACPI: BOOT 3FEEBFD8, 0028 (r1 ACER Kestrel 20021012 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
ACPI: HPET id: 0x8086a201 base: 0x0
Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000)
Built 1 zonelists. Total pages: 259811
Kernel command line: root=/dev/disk/by-id/scsi-SATA_IC25N060ATMR04-_MRA300K5V38PNH-part4 vga=0x317 resume=/dev/sda7 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0180f000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1498.767 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030364k/1047424k available (1824k kernel code, 16412k reserved, 761k data, 228k init, 129920k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c832b - 0xc0386964 ( 761 kB)
.text : 0xc0100000 - 0xc02c832b (1824 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2999.48 BogoMIPS (lpj=5998963)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 4014k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 746 Objects with 55 Devices 181 Methods 18 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0440)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..........................................................................
Initialized 18/18 Regions 3/3 Fields 36/36 Buffers 17/24 Packages (755 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 59 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *6)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *6)
ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:04: ioport range 0x164e-0x164f has been reserved
pnp: 00:04: iomem range 0xfec10000-0xfec1ffff could not be reserved
pnp: 00:04: iomem range 0xff800000-0xffbfffff could not be reserved
pnp: 00:04: iomem range 0xfff00000-0xffffffff could not be reserved
pnp: 00:04: iomem range 0x0-0x9ffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: d0100000-d01fffff
PREFETCH window: d8000000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:06.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: 50000000-53ffffff
MEM window: 58000000-5bffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: d0200000-d05fffff
PREFETCH window: 50000000-55ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:06.0 (0104 -> 0107)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1193999506.364:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:56e3
vesafb: pmi: set display start = c00c5751, set palette = c00c578b
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to NOHz mode on CPU #0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
ACPI: Thermal Zone [THRM] (64 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = -229797029 ns)
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ata2.00: ATAPI: QSI DVDRW SDW-042, DX70, max UDMA/33
input: AT Translated Set 2 keyboard as /class/input/input2
ata2.00: configured for UDMA/33
ata2: EH pending after completion, repeating EH (cnt=4)
scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-042 DX70 PQ: 0 ANSI: 5
ACPI: Fan [FAN0] (on)
ACPI: Transitioning device [FAN1] to D3
ACPI: Transitioning device [FAN1] to D3
ACPI: Fan [FAN1] (off)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sda6 sda7 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
usb 2-1: new low speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: new device found, idVendor=046d, idProduct=c019
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Optical Mouse
usb 2-1: Manufacturer: Logitech
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Optical Mouse as /class/input/input3
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
Linux agpgart interface v0.102 (c) Dave Jones
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 23
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
pnp: Device 00:0a disabled.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:08: reported by Plug and Play ACPI
agpgart: Detected an Intel 855GM Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:01 failed with error -16
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI Exception (sbs-1647): AE_ERROR, Error obtaining _EC [20070126]
sbs: probe of ACPI0001:00 failed with error -5
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01a21b22, devctl 0x64
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
Yenta: ISA IRQ mask 0x0838, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA sound/pci/ac97/ac97_codec.c:2145: MC'97 0 converters and GPIO not ready (0x1)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 51923 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6
eth1: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:4b:d9:77
ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Adding 610428k swap on /dev/sda7. Priority:-1 extents:1 across:610428k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00001edbb6]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1193999522.717:2): type=1505 info="AppArmor initialized" pid=1932
ttyS1: LSR safety check engaged!
powernow: This module only works with AMD K7 CPUs
ttyS1: LSR safety check engaged!
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8183 buckets, 65464 max)
[fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
ADDRCONF(NETDEV_UP): eth1: link is not ready
audit(1193995946.757:3): audit_pid=2884 old=0 by auid=4294967295
IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk>
bootsplash: status on console 0 changed to on
NET: Registered protocol family 17
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
martian source 255.255.255.255 from 192.168.0.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:19:5b:bc:ed:09:08:00
martian source 255.255.255.255 from 192.168.0.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:19:5b:bc:ed:09:08:00
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=384 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=364
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=269 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=249
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=384 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=364
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=384 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=364
eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.174.5 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=51702 DF PROTO=TCP SPT=6543 DPT=22523 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.13.12 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=18187 DF PROTO=TCP SPT=11113 DPT=4075 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.147 DST=81.0.237.227 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=835 DF PROTO=TCP SPT=20327 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0006654800C1C6A5)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=81.0.237.227 DST=192.168.0.147 LEN=80 TOS=0x00 PREC=0x80 TTL=57 ID=55928 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.0.147 DST=81.0.237.227 LEN=52 TOS=0x00 PREC=0x00 TTL=57 ID=835 DF PROTO=TCP SPT=20327 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0006654800C1C6A5) ]
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=81.0.237.227 DST=192.168.0.147 LEN=80 TOS=0x00 PREC=0x80 TTL=57 ID=55928 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.0.147 DST=81.0.237.227 LEN=52 TOS=0x00 PREC=0x00 TTL=57 ID=835 DF PROTO=TCP SPT=20327 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 OPT (0101080A0006654800C1C6A5) ]
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.122.13 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=1082 DF PROTO=TCP SPT=11097 DPT=29271 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.14.14 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=19579 DF PROTO=TCP SPT=11100 DPT=9125 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.12.2 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=12641 DF PROTO=TCP SPT=11101 DPT=15606 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.40.3 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=243 ID=0 DF PROTO=TCP SPT=11018 DPT=17093 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.145.19 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=52 ID=8436 DF PROTO=TCP SPT=11097 DPT=15919 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.11.2 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=243 ID=0 DF PROTO=TCP SPT=11018 DPT=17091 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.16.16 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=52621 DF PROTO=TCP SPT=11147 DPT=27565 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.15.12 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=46680 DF PROTO=TCP SPT=11147 DPT=27564 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.14.16 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=36358 DF PROTO=TCP SPT=11147 DPT=20373 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.13.15 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=44414 DF PROTO=TCP SPT=11147 DPT=20372 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.14.21 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=7531 DF PROTO=TCP SPT=11102 DPT=18602 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:0e:35:4a:51:79:00:19:5b:bc:ed:09:08:00 SRC=172.21.17.15 DST=192.168.0.147 LEN=40 TOS=0x00 PREC=0x80 TTL=51 ID=22097 DF PROTO=TCP SPT=11147 DPT=20385 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.147 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
modprobe battery (možná se k tobě bude vázat i bug #301365 v bugzilla.novell.com)
4.11.2007 19:31
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
quimby@quimby-laptop:~> su Heslo: quimby-laptop:/home/quimby # modprobe battery quimby-laptop:/home/quimby #Taky nic... Na tu bugzillu jsem se mrknul. Vypada to podobne, ale zadne reseni jsem tam nenasel.
6.11.2007 10:35
Quimby | skóre: 6
| blog: Quimby
| Havířov / Praha
Tak uz jsem si to vyresil. Zde i reseni, kdyby se to nekomu hodilo:
Podarilo se mi nainstalovat novejsi kernel, konkretne 2.6.23.1, a ted uz podpora baterky bezi bez problemu. Predtim jsem mel 2.6.22.5 myslim.
Tiskni
Sdílej:
