abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×
    dnes 13:33 | Nová verze

    Vyšlo Pharo 12.0, programovací jazyk a vývojové prostředí s řadou pokročilých vlastností. Krom tradiční nadílky oprav přináší nový systém správy ladících bodů, nový způsob definice tříd, prostor pro objekty, které nemusí procházet GC a mnoho dalšího.

    Pavel Křivánek | Komentářů: 0
    dnes 04:55 | Zajímavý software

    Microsoft zveřejnil na GitHubu zdrojové kódy MS-DOSu 4.0 pod licencí MIT. Ve stejném repozitáři se nacházejí i před lety zveřejněné zdrojové k kódy MS-DOSu 1.25 a 2.0.

    Ladislav Hagara | Komentářů: 19
    včera 17:33 | Nová verze

    Canonical vydal (email, blog, YouTube) Ubuntu 24.04 LTS Noble Numbat. Přehled novinek v poznámkách k vydání a také příspěvcích na blogu: novinky v desktopu a novinky v bezpečnosti. Vydány byly také oficiální deriváty Edubuntu, Kubuntu, Lubuntu, Ubuntu Budgie, Ubuntu Cinnamon, Ubuntu Kylin, Ubuntu MATE, Ubuntu Studio, Ubuntu Unity a Xubuntu. Jedná se o 10. LTS verzi.

    Ladislav Hagara | Komentářů: 13
    včera 14:22 | Komunita

    Na YouTube je k dispozici videozáznam z včerejšího Czech Open Source Policy Forum 2024.

    Ladislav Hagara | Komentářů: 2
    včera 13:22 | Nová verze

    Fossil (Wikipedie) byl vydán ve verzi 2.24. Jedná se o distribuovaný systém správy verzí propojený se správou chyb, wiki stránek a blogů s integrovaným webovým rozhraním. Vše běží z jednoho jediného spustitelného souboru a uloženo je v SQLite databázi.

    Ladislav Hagara | Komentářů: 0
    včera 12:44 | Nová verze

    Byla vydána nová stabilní verze 6.7 webového prohlížeče Vivaldi (Wikipedie). Postavena je na Chromiu 124. Přehled novinek i s náhledy v příspěvku na blogu. Vypíchnout lze Spořič paměti (Memory Saver) automaticky hibernující karty, které nebyly nějakou dobu používány nebo vylepšené Odběry (Feed Reader).

    Ladislav Hagara | Komentářů: 0
    včera 04:55 | Nová verze

    OpenJS Foundation, oficiální projekt konsorcia Linux Foundation, oznámila vydání verze 22 otevřeného multiplatformního prostředí pro vývoj a běh síťových aplikací napsaných v JavaScriptu Node.js (Wikipedie). V říjnu se verze 22 stane novou aktivní LTS verzí. Podpora je plánována do dubna 2027.

    Ladislav Hagara | Komentářů: 0
    včera 04:22 | Nová verze

    Byla vydána verze 8.2 open source virtualizační platformy Proxmox VE (Proxmox Virtual Environment, Wikipedie) založené na Debianu. Přehled novinek v poznámkách k vydání a v informačním videu. Zdůrazněn je průvodce migrací hostů z VMware ESXi do Proxmoxu.

    Ladislav Hagara | Komentářů: 0
    včera 04:11 | Nová verze

    R (Wikipedie), programovací jazyk a prostředí určené pro statistickou analýzu dat a jejich grafické zobrazení, bylo vydáno ve verzi 4.4.0. Její kódové jméno je Puppy Cup.

    Ladislav Hagara | Komentářů: 0
    24.4. 22:44 | IT novinky

    IBM kupuje společnost HashiCorp (Terraform, Packer, Vault, Boundary, Consul, Nomad, Waypoint, Vagrant, …) za 6,4 miliardy dolarů, tj. 35 dolarů za akcii.

    Ladislav Hagara | Komentářů: 14
    KDE Plasma 6
     (73%)
     (9%)
     (2%)
     (16%)
    Celkem 788 hlasů
     Komentářů: 4, poslední 6.4. 15:51
    Rozcestník

    Dotaz: Arch, catalyst a *ERROR* CMMQS initialization is failed

    unknown_ avatar 21.2.2008 12:03 unknown_ | skóre: 30 | blog: blog
    Arch, catalyst a *ERROR* CMMQS initialization is failed
    Přečteno: 782×
    Ahoj. Zkusil sem nainstalit Arch. Rychlost je vynikající (ta i686 optimalizace je znát). Mám problém. Nainstaloval sem pacman -S extra/catalyst (8.02-1). Pak sem do /etc/rc.conf dal modul fglrx. lsmod říká, že je naloadován.

    dmesg:
    Linux version 2.6.24-ARCH (root@T-POWA-LX) (gcc version 4.2.3) #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
     BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
     BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
     BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
     BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
     BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
     BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
     BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
     BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 130928) 0 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      Normal       4096 ->   130928
      HighMem    130928 ->   130928
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
        0:        0 ->   130928
    On node 0 totalpages: 130928
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 4064 pages, LIFO batch:0
      Normal zone: 990 pages used for memmap
      Normal zone: 125842 pages, LIFO batch:31
      HighMem zone: 0 pages used for memmap
      Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F66B0, 0014 (r0 PTLTD )
    ACPI: RSDT 1FF762D7, 0030 (r1 PTLTD  Wistron   6040000  LTP        0)
    ACPI: FACP 1FF7AED2, 0074 (r1 INTEL  ODEM      6040000 PTL        50)
    ACPI: DSDT 1FF767DF, 46F3 (r1 INTEL  ODEM      6040000 MSFT  100000E)
    ACPI: FACS 1FF7BFC0, 0040
    ACPI: BOOT 1FF7AFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
    ACPI: SSDT 1FF76307, 04D0 (r1 INTEL    GV3Ref     1001 MSFT  100000E)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d8000
    swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e0000
    swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
    swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129906
    Kernel command line: root=/dev/sda3 ro
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140d000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 1694.519 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 512752k/523712k available (2493k kernel code, 10356k reserved, 853k data, 308k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xfff80000 - 0xfffff000   ( 508 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
        lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
          .init : 0xc044b000 - 0xc0498000   ( 308 kB)
          .data : 0xc036f73f - 0xc0444cdc   ( 853 kB)
          .text : 0xc0100000 - 0xc036f73f   (2493 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 3392.92 BogoMIPS (lpj=5651072)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    ACPI: setting ELCR to 0200 (from 0c00)
    CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    net_namespace: 64 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd7d5, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 1180-11bf claimed by ICH4 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 9 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    system 00:04: ioport range 0x200-0x20f has been reserved
    system 00:04: ioport range 0x600-0x60f has been reserved
    system 00:04: ioport range 0x700-0x70f has been reserved
    system 00:04: ioport range 0x800-0x80f has been reserved
    system 00:04: ioport range 0x1000-0x107f has been reserved
    system 00:04: ioport range 0x1180-0x11bf has been reserved
    system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
    PCI: Bridge: 0000:00:01.0
      IO window: 3000-3fff
      MEM window: d0100000-d01fffff
      PREFETCH window: d8000000-dfffffff
    PCI: Bus 3, cardbus bridge: 0000:02:09.0
      IO window: 00001400-000014ff
      IO window: 00002800-000028ff
      PREFETCH window: 34000000-37ffffff
      MEM window: 38000000-3bffffff
    PCI: Bus 7, cardbus bridge: 0000:02:09.1
      IO window: 00002c00-00002cff
      IO window: 00004000-000040ff
      PREFETCH window: 3c000000-3fffffff
      MEM window: 40000000-43ffffff
    PCI: Bridge: 0000:00:1e.0
      IO window: disabled.
      MEM window: d0200000-d02fffff
      PREFETCH window: disabled.
    PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:02:09.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1695k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI interrupt for device 0000:00:1f.6 disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 308k freed
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.12
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
    ata1.00: ATA-6: HTE726060M9AT00, MH4OA6AA, max UDMA/100
    ata1.00: 117210240 sectors, multi 16: LBA48 
    ata1.00: configured for UDMA/100
    ata2.00: ATAPI: QSI     DVD+/-RW SDW-082, LX32, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access     ATA      HTE726060M9AT00  MH4O PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM            QSI      DVD+-RW SDW-082  LX32 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
    Driver 'sd' needs updating - please use bus_type methods
    Driver 'sr' needs updating - please use bus_type methods
    usb usb1: configuration #1 chosen from 1 choice
    sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda:<6>hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
     sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-1: new low speed USB device using uhci_hcd and address 3
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:02:05.0 to 64
    ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
    b44.c:v2.0
    eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:b6:20:82
    ieee80211_crypt: registered algorithm 'NULL'
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
    ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
    ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
    ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 52799 usecs
    intel8x0: clocking to 48000
    ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1f.6 to 64
    Linux agpgart interface v0.102
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
    [fglrx] ASYNCIO init succeed!
    [fglrx] PAT is enabled successfully!
    [fglrx] module loaded - fglrx 8.45.5 [Feb  1 2008] on minor 0
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /devices/virtual/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/virtual/input/input3
    ACPI: Lid Switch [LID0]
    input: Sleep Button (CM) as /devices/virtual/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THRC] (73 C)
    ACPI: Thermal Zone [THRS] (59 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    agpgart: Detected an Intel 855PM Chipset.
    agpgart: AGP aperture is 256M @ 0xe0000000
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input5
    input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    intel_rng: FWH not detected
    ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
    ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    input: PC Speaker as /devices/platform/pcspkr/input/input7
    Yenta: CardBus bridge found at 0000:02:09.0 [17c0:3301]
    rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Yenta: ISA IRQ mask 0x00b8, PCI irq 11
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
    pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
    Yenta: CardBus bridge found at 0000:02:09.1 [17c0:3301]
    Yenta: ISA IRQ mask 0x00b8, PCI irq 10
    Socket status: 30000006
    Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
    pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:02:09.2 to 64
    Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d0203000-d02037ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    parport_pc 00:06: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[06e40a00694f1003]
    lp0: using parport0 (interrupt-driven).
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    ppdev: user-space parallel port driver
    Marking TSC unstable due to: TSC halts in idle.
    Time: acpi_pm clocksource has been installed.
    EXT3 FS on sda3, internal journal
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on sda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1028152k swap on /dev/sda2.  Priority:-1 extents:1 across:1028152k
    b44: eth0: Link is up at 10 Mbps, half duplex.
    b44: eth0: Flow control is off for TX and off for RX.
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [fglrx] Internal AGP support requested, but kernel AGP support active.
    [fglrx] Have to use kernel AGP support to avoid conflicts.
    [fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
    [fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
    [fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
    [fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
    [fglrx] Reserve Block - 2 offset =  0X8000000 length = 0X10000000
    [fglrx:firegl_cmmqs_init] *ERROR* CMMQS initialization is failed.
    NET: Registered protocol family 4
    NET: Registered protocol family 5
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    [fglrx] Internal AGP support requested, but kernel AGP support active.
    [fglrx] Have to use kernel AGP support to avoid conflicts.
    [fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
    [fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
    [fglrx:firegl_cmmqs_init] *ERROR* CMMQS initialization is failed.
    
    
    lsmod:
    Module                  Size  Used by
    ipv6                  248388  8 
    appletalk              30688  2 
    ipx                    23972  2 
    p8022                   2048  1 ipx
    psnap                   3332  2 appletalk,ipx
    llc                     6036  2 p8022,psnap
    p8023                   1920  1 ipx
    ext2                   62472  1 
    joydev                  9664  0 
    ppdev                   7556  0 
    lp                      9220  0 
    parport_pc             35172  1 
    parport                31432  3 ppdev,lp,parport_pc
    firewire_ohci          16128  0 
    firewire_core          36544  1 firewire_ohci
    crc_itu_t               2304  1 firewire_core
    serio_raw               5636  0 
    psmouse                36496  0 
    rtc_cmos                7584  0 
    rtc_core               15496  1 rtc_cmos
    rtc_lib                 2944  1 rtc_core
    ohci1394               28848  0 
    ieee1394               79800  1 ohci1394
    yenta_socket           23052  2 
    rsrc_nonstatic         11008  1 yenta_socket
    pcspkr                  2944  0 
    video                  16016  0 
    output                  3200  1 video
    i2c_i801                8848  0 
    i2c_core               19328  1 i2c_i801
    usbhid                 40896  0 
    hid                    33920  1 usbhid
    ff_memless              5128  1 usbhid
    intel_agp              21780  1 
    shpchp                 29460  0 
    pci_hotplug            26528  1 shpchp
    sg                     26640  0 
    evdev                   9344  0 
    thermal                13084  0 
    processor              29400  2 thermal
    fan                     3844  0 
    button                  6544  0 
    battery                10756  0 
    ac                      4612  0 
    fglrx                1475852  3 
    agpgart                27352  2 intel_agp,fglrx
    snd_intel8x0m          14092  0 
    snd_seq_oss            29440  0 
    snd_seq_midi_event      6528  1 snd_seq_oss
    snd_seq                47056  4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device          6924  2 snd_seq_oss,snd_seq
    snd_intel8x0           28572  0 
    snd_ac97_codec         95268  2 snd_intel8x0m,snd_intel8x0
    snd_pcm_oss            37024  0 
    snd_pcm                68996  4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer              19204  2 snd_seq,snd_pcm
    snd_page_alloc          8072  3 snd_intel8x0m,snd_intel8x0,snd_pcm
    snd_mixer_oss          14464  1 snd_pcm_oss
    snd                    44772  10 snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore               6368  1 snd
    ac97_bus                2176  1 snd_ac97_codec
    ipw2200               138184  0 
    ieee80211              30664  1 ipw2200
    ieee80211_crypt         4992  1 ieee80211
    b44                    23568  0 
    ssb                    29188  1 b44
    pcmcia                 32556  1 ssb
    pcmcia_core            32664  3 yenta_socket,rsrc_nonstatic,pcmcia
    mii                     4864  1 b44
    ext3                  121992  2 
    jbd                    43412  1 ext3
    mbcache                 6912  2 ext2,ext3
    sr_mod                 14884  0 
    cdrom                  33824  1 sr_mod
    sd_mod                 22656  5 
    ehci_hcd               32524  0 
    uhci_hcd               22672  0 
    pata_acpi               5248  0 
    usbcore               125292  4 usbhid,ehci_hcd,uhci_hcd
    ata_piix               14724  4 
    ata_generic             5252  0 
    libata                137712  3 pata_acpi,ata_piix,ata_generic
    
    xorg.conf:
    Section "ServerLayout"
    	Identifier     "X.org Configured"
    	Screen      0  "aticonfig-Screen[0]" 0 0
    	InputDevice    "Mouse0" "CorePointer"
    	InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    
    Section "Files"
    	RgbPath      "/usr/share/X11/rgb"
    	ModulePath   "/usr/lib/xorg/modules"
    	FontPath     "/usr/share/fonts/misc"
    	FontPath     "/usr/share/fonts/100dpi:unscaled"
    	FontPath     "/usr/share/fonts/75dpi:unscaled"
    	FontPath     "/usr/share/fonts/TTF"
    	FontPath     "/usr/share/fonts/Type1"
    EndSection
    
    Section "Module"
    	Load  "xtrap"
    	Load  "glx"
    	Load  "extmod"
    	Load  "dbe"
    	Load  "record"
    	Load  "GLcore"
    #	Load  "dri"
    	Load  "freetype"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Keyboard0"
    	Driver      "kbd"
    EndSection
    
    Section "InputDevice"
    	Identifier  "Mouse0"
    	Driver      "mouse"
    	Option	    "Protocol" "auto"
    	Option	    "Device" "/dev/input/mice"
    	Option	    "ZAxisMapping" "4 5 6 7"
    EndSection
    
    Section "Monitor"
    	Identifier   "Monitor0"
    	VendorName   "Monitor Vendor"
    	ModelName    "Monitor Model"
    EndSection
    
    Section "Monitor"
    	Identifier   "aticonfig-Monitor[0]"
    	Option	    "VendorName" "ATI Proprietary Driver"
    	Option	    "ModelName" "Generic Autodetecting Monitor"
    	Option	    "DPMS" "true"
    EndSection
    
    Section "Device"
    
         
    	Identifier  "Card0"
    	Driver      "ati"
    	VendorName  "ATI Technologies Inc"
    	BoardName   "RV350 [Mobility Radeon 9600 M10]"
    	BusID       "PCI:1:0:0"
    EndSection
    
    Section "Device"
    	Identifier  "aticonfig-Device[0]"
    	Driver      "fglrx"
    EndSection
    
    Section "Screen"
    	Identifier "Screen0"
    	Device     "Card0"
    	Monitor    "Monitor0"
    	SubSection "Display"
    		Viewport   0 0
    		Depth     1
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     4
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     8
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     15
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     16
    	EndSubSection
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    
    Section "Screen"
    	Identifier "aticonfig-Screen[0]"
    	Device     "aticonfig-Device[0]"
    	Monitor    "aticonfig-Monitor[0]"
    	DefaultDepth     24
    	SubSection "Display"
    		Viewport   0 0
    		Depth     24
    	EndSubSection
    EndSection
    
    #Section "DRI"
    #	Mode 0666
    #EndSection
                 
    
    problém je, že to hlásí:
    [merlyn@Vallhala ~]$ glxinfo|grep render
    direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
    OpenGL renderer string: Mesa GLX Indirect
    [merlyn@Vallhala ~]$
    
    // po zadání export LIBGL_DEBUG=verbose se nic nezmění

    a
    [merlyn@Vallhala ~]$ fglrxinfo
    display: :0.0  screen: 0
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.4 (2.1 Mesa 7.0.3-rc1)
    
    [merlyn@Vallhala ~]$
    
    A 3D akcelerace nefunguje a netuším co s tím. M

    Odpovědi

    kozzi avatar 21.2.2008 12:22 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    A co /var/log/Xorg.0.log
    Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
    unknown_ avatar 21.2.2008 12:25 unknown_ | skóre: 30 | blog: blog
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-ARCH i686 
    Current Operating System: Linux Vallhala 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008 i686
    Build Date: 03 February 2008  02:54:48PM
     
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 21 20:30:19 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "aticonfig-Screen[0]" (0)
    (**) |   |-->Monitor "aticonfig-Monitor[0]"
    (**) |   |-->Device "aticonfig-Device[0]"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    	/usr/share/fonts/misc,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/TTF,
    	/usr/share/fonts/Type1,
    	/usr/share/fonts/misc,
    	/usr/share/fonts/100dpi:unscaled,
    	/usr/share/fonts/75dpi:unscaled,
    	/usr/share/fonts/TTF,
    	/usr/share/fonts/Type1
    (**) RgbPath set to "/usr/share/X11/rgb"
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d65c0
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.3
    	X.Org Video Driver: 2.0
    	X.Org XInput driver : 2.0
    	X.Org Server Extension : 0.3
    	X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,3340 card 17c0,4010 rev 21 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 21 class 06,04,00 hdr 01
    (II) PCI: 00:1d:0: chip 8086,24c2 card 17c0,4006 rev 03 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,24c4 card 17c0,4006 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,24c7 card 17c0,4006 rev 03 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,24cd card 17c0,1071 rev 03 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
    (II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,24ca card 17c0,4006 rev 03 class 01,01,8a hdr 00
    (II) PCI: 00:1f:3: chip 8086,24c3 card 17c0,4006 rev 03 class 0c,05,00 hdr 00
    (II) PCI: 00:1f:5: chip 8086,24c5 card 17c0,2005 rev 03 class 04,01,00 hdr 00
    (II) PCI: 00:1f:6: chip 8086,24c6 card 17c0,1069 rev 03 class 07,03,00 hdr 00
    (II) PCI: 01:00:0: chip 1002,4e50 card 17c0,2072 rev 00 class 03,00,00 hdr 00
    (II) PCI: 02:05:0: chip 14e4,4401 card 17c0,1082 rev 01 class 02,00,00 hdr 00
    (II) PCI: 02:06:0: chip 8086,4223 card 8086,1001 rev 05 class 02,80,00 hdr 00
    (II) PCI: 02:09:0: chip 1180,0476 card 1400,0000 rev ac class 06,07,00 hdr 82
    (II) PCI: 02:09:1: chip 1180,0476 card 2c00,0000 rev ac class 06,07,00 hdr 82
    (II) PCI: 02:09:2: chip 1180,0552 card 17c0,107a rev 04 class 0c,00,10 hdr 80
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 I/O range:
    	[0] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
    	[1] -1	0	0x00003400 - 0x000034ff (0x100) IX[B]
    	[2] -1	0	0x00003800 - 0x000038ff (0x100) IX[B]
    	[3] -1	0	0x00003c00 - 0x00003cff (0x100) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    	[0] -1	0	0xd0100000 - 0xd01fffff (0x100000) MX[B]
    (II) Bus 1 prefetchable memory range:
    	[0] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0000 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
    	[0] -1	0	0xd0200000 - 0xd02fffff (0x100000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-CardBus bridge:
    (II) Bus 3: bridge is at (2:9:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) PCI-to-CardBus bridge:
    (II) Bus 7: bridge is at (2:9:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
    (--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x3000/8
    (II) Addressable bus resource ranges are
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    	[0] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[1] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[2] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[3] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[4] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[5] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[6] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[8] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[10] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[11] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[12] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[13] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[14] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[15] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[16] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[17] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[20] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[21] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[22] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[23] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    	[0] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[1] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[2] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[3] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[4] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[5] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[6] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[8] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[10] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[11] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[12] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[13] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[14] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[15] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[16] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[17] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[20] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[21] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[22] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[23] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[16] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[17] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[18] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[19] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[20] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[21] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.4.0.90, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    	compiled for 7.1.0, module version = 8.45.5
    	Module class: X.Org Video Driver
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    	compiled for 1.4.0, module version = 1.2.3
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    	compiled for 1.4.0, module version = 1.2.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.0
    (II) Primary Device is: PCI 01:00:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.45.5
    (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.455.2                  
    (II) ATI Proprietary Linux Driver Build Date: Feb  1 2008 10:11:22
    (--) Assigning device section with no busID to primary device
    (--) Chipset Supported AMD Graphics Processor (0x4E50) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[16] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[17] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[18] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[19] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[20] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[21] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    (II) fglrx(0): pEnt->device->identifier=0x820bb20
    (II) resource ranges after probing:
    	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[24] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[29] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[30] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[31] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[32] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "DPMS" "true"
    (II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (--) fglrx(0): Chipset: "ATI MOBILITY RADEON 9600/9700 Series" (Chipset = 0x4e50)
    (--) fglrx(0): (PciSubVendor = 0x17c0, PciSubDevice = 0x2072)
    (--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
    (--) fglrx(0): MMIO registers at 0xd0100000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 131072 kB
    (II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600   
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: P10 
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmGetBusid returned ''
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    	compiled for 7.1.0, module version = 8.45.5
    	ABI class: X.Org Server Extension, version 0.3
    (II) fglrx(0): Using adapter: 1:0.0.
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): AGP card detected
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
    (II) fglrx(0):  Display1: No EDID information from DDC.
    (II) fglrx(0):  Display1: Failed to get EDID information. 
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled
    (II) fglrx(0): Primary Controller - LCD on internal LVDS
    (II) fglrx(0): Internal Desktop Setting: 0x00000001
    (II) fglrx(0): POWERplay version 3.  1 power state available:
    (II) fglrx(0):   1. 392/203MHz @ 60Hz [enable load balancing]
    (==) fglrx(0): Qbs is not supported in this release. Disabled.
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0):  PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) fglrx(0): Center Mode is disabled 
    (==) fglrx(0): TMDS coherent mode is enabled 
    (II) fglrx(0): Total of 15 modes found for primary display.
    (--) fglrx(0): Virtual size is 1400x1050 (pitch 0)
    (**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1440 1552 1688  1050 1052 1055 1063 (64.0 kHz)
    (**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1376 1488 1688  1024 1038 1041 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0  108.00  1152 1312 1424 1688  864 961 964 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1248 1360 1688  768 910 913 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "848x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0  108.00  848 1160 1272 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1136 1248 1688  600 826 829 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "720x576": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0  108.00  720 1096 1208 1688  576 814 817 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "720x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0  108.00  720 1096 1208 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1056 1168 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1056 1168 1688  400 726 729 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1056 1168 1688  350 701 704 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0  108.00  512 992 1104 1688  384 718 721 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0  108.00  400 936 1048 1688  300 826 829 1066 doublescan (64.0 kHz)
    (**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0  108.00  320 920 1032 1688  240 766 769 1066 doublescan (64.0 kHz)
    (**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0  108.00  320 920 1032 1688  200 726 729 1066 doublescan (64.0 kHz)
    (==) fglrx(0): DPI set to (96, 96)
    (--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
    (**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1440 1552 1688  1050 1052 1055 1063 (64.0 kHz)
    (**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1376 1488 1688  1024 1038 1041 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0  108.00  1152 1312 1424 1688  864 961 964 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1248 1360 1688  768 910 913 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "848x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0  108.00  848 1160 1272 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1136 1248 1688  600 826 829 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "720x576": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0  108.00  720 1096 1208 1688  576 814 817 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "720x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0  108.00  720 1096 1208 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1056 1168 1688  480 766 769 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1056 1168 1688  400 726 729 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1056 1168 1688  350 701 704 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0  108.00  512 992 1104 1688  384 718 721 1066 (64.0 kHz)
    (**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0  108.00  400 936 1048 1688  300 826 829 1066 doublescan (64.0 kHz)
    (**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0  108.00  320 920 1032 1688  240 766 769 1066 doublescan (64.0 kHz)
    (**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0  108.00  320 920 1032 1688  200 726 729 1066 doublescan (64.0 kHz)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.2.0
    	ABI class: X.Org Video Driver, version 2.0
    (==) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) fglrx(0): Depth moves disabled by default
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): ATI GART size: 256 MB
    (II) fglrx(0): [pci] find AGP GART
    (II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
    (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
    (II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
    (II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
    (II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000)
    (II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
    (II) fglrx(0): [agp] graphics chipset has AGP v2.0
    (II) fglrx(0): [pcie] 0 kB allocated
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] 0	0	0xd0100000 - 0xd010ffff (0x10000) MX[B]
    	[1] 0	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
    	[2] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
    	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[6] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
    	[7] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
    	[8] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
    	[9] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
    	[10] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
    	[11] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
    	[12] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
    	[13] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[14] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
    	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
    	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    	[19] 0	0	0x00003000 - 0x000030ff (0x100) IX[B]
    	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[22] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
    	[23] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
    	[24] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
    	[25] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
    	[26] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
    	[27] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
    	[28] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[29] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[30] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
    	[31] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
    	[32] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
    	[33] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
    	[34] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
    	[35] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
    	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (WW) fglrx(0): could not detect X server version (query_status=-3)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports 
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card10
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card11
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card12
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card13
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card14
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmGetBusid returned ''
    (II) [drm] DRM interface version 1.0
    (II) [drm] DRM open master succeeded.
    (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) fglrx(0): [drm] framebuffer handle = 0x7000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [drm] installed DRM signal handler
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0):     Name: fglrx
    (II) fglrx(0):     Version: 8.45.5
    (II) fglrx(0):     Date: Feb  1 2008
    (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.24-ARCH
    (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
    (II) fglrx(0):     Build-Kernel __SMP__:            no
    (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    (II) fglrx(0): [drm] register handle = 0x00009000
    (II) fglrx(0): Interrupt handler installed at IRQ 11.
    (II) fglrx(0): Exposed events to the /proc interface
    (EE) fglrx(0): Failed to initialize CMMQS driver.
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x6000 at 0xb7f04000
    (II) fglrx(0): [drm] Closed DRM master.
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed!                  *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO)             *
    (WW) fglrx(0): * no 3D acceleration available                *
    (WW) fglrx(0): ********************************************* *
    (II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x08000000
    (==) fglrx(0): Write-combining range (0xd8000000,0x8000000)
    (II) fglrx(0): FBMM initialized for area (0,0)-(1408,8191)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1408 x 7141
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    	Screen to screen bit blits
    	Solid filled rectangles
    	Solid Horizontal and Vertical Lines
    	Offscreen Pixmaps
    	Setting up tile and stipple cache:
    		32 128x128 slots
    		32 256x256 slots
    		16 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (WW) fglrx(0): Option "VendorName" is not used
    (WW) fglrx(0): Option "ModelName" is not used
    (II) fglrx(0): Direct rendering disabled
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
    (II) Module GLcore: vendor="X.Org Foundation"
    	compiled for 1.4.0.90, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 0.3
    (II) GLX: Initialized MESA-PROXY GL provider for screen 0
    (**) Option "Protocol" "auto"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) evaluating device (Mouse0)
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (II) 3rd Button detected: disabling emulate3Button
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled
    
    kozzi avatar 21.2.2008 12:38 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    Tak to vypada ze chyba je v tech ovladacich, je to nejspis BUG budes muset pockat na to az to opravi. Mezitim zkus pouzit radeonhd jestli podporuje tvoji kartu.
    Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
    unknown_ avatar 21.2.2008 12:42 unknown_ | skóre: 30 | blog: blog
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    Mám ATI Mobility Radeon 9700, mám pocit, že na tu radeonhd nejde, ale můžu to zkusit.
    kozzi avatar 21.2.2008 12:49 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    mas pravdu neni. Dalsi moznost je prejit na nejakou starsi verzi catalyst, ale ta nebude podporovat AIGLX, tudiz ani compiz atd, ale akcelerace by tam jed mela.
    Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
    21.2.2008 12:41 Jix0 | skóre: 24 | blog: Not only for humans
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    Dopis do Xorg.conf toto:
    Section "Extensions"
            Option      "Composite" "disabled"
    EndSection
    a v sekci Module odkomentuj (odstran tu mrizku) pred tim "Load"
    #	Load  "dri"
    If you will not cooperate, you are to be executed! | Starting as a DJ
    unknown_ avatar 21.2.2008 12:45 unknown_ | skóre: 30 | blog: blog
    Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
    Nepomohlo. Spíš to bude asi ten bug.

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.