Dotaz: TEAC W58E

[Michal Fortik]

Pali, ale CD nejde precist.<BR>

Prikladam vypis cdrecordu : <BR>

fort:~# cdrecord -v -dummy -eject dev=/dev/sg0 speed=8 -data /root/<BR>

aAttached devices:<BR>

Host: scsi0 Channel: 00 Id: 00 Lun: 00<BR>

Vendor: TEAC Model: CD-W58E Rev: 1.0A<BR>

Type: CD-ROM<BR>

ANSI SCSI revision: 02<BR>

<BR>

Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM <BR>

scsidev: '/dev/sg0'<BR>

devname: '/dev/sg0'<BR>

scsibus: -2 target: -2 lun: -2<BR>

Linux sg driver version: 3.1.17<BR>

Using libscg version 'schily-0.1' atapi: 1<BR>

Device type : Removable CD-ROM<BR>

Version : 0<BR>

Response Format: 1<BR>

Vendor_info : 'TEAC '<BR>

Identifikation : 'CD-W58E '<BR>

Revision : '1.0A'<BR>

Device seems to be: Generic mmc CD-RW.<BR>

Using generic SCSI-3/mmc CD-R driver (mmc_cdr).<BR>

Driver flags : SWABAUDIO<BR>

Drive buf size : 1300480 = 1270 KB<BR>

FIFO size : 4194304 = 4096 KB<BR>

Track 01: data 600 MB<BR>

Total size: 689 MB (68:16.02) = 307202 sectors<BR>

Lout start: 689 MB (68:18/02) = 307202 sectors<BR>

Current Secsize: 2048<BR>

ATIP info from disk:<BR>

Indicated writing power: 4<BR>

Is not unrestricted<BR>

Is not erasable<BR>

Disk sub type: Medium Type A, high Beta category (A+) (3)<BR>

ATIP start of lead in: -11250 (97:32/00)<BR>

ATIP start of lead out: 337275 (74:59/00)<BR>

Disk type: Long strategy type (Cyanine, AZO or similar)<BR>

Manuf. index: 26<BR>

Manufacturer: TDK Corporation<BR>

Blocks total: 337275 Blocks current: 337275 Blocks remaining: 30073<BR>

Starting to write CD/DVD at speed 8 in dummy mode for single session.<BR>

Last chance to quit, starting dummy write in 1 seconds.<BR>

Waiting for reader process to fill input buffer ... input buffer rea<BR> dy.<BR>

Starting new track at sector: 0<BR>

Track 01: 600 of 600 MB written (fifo 100%).<BR>

Track 01: Total bytes read/written: 629145600/629145600 (307200 sectors).<BR>

Writing time: 517.252s<BR>

Fixating...<BR>

WARNING: Some drives don't like fixation in dummy mode.<BR>

Fixating time: 32.056s<BR>

cdrecord: fifo had 9910 puts and 9910 gets. cdrecord: fifo was 0 times empty and 9826 times full, min fill was 89%.<BR>

<BR>

<BR> Jeste vypis /proc/scsi/scsi :<BR>

<BR>

Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00<BR>

Vendor: TEAC Model: CD-W58E Rev: 1.0A<BR>

Type: CD-ROM ANSI SCSI revision: 02<BR>

Moc dik za kazdou radu.

Odpovědi

[Juraj Puchky]

Hmm nevim nejsem si jisty ale nikde nevidim ze by na to cd palil<BR> v nejakem fs formatu treba iso..<BR> Co kdyby si skusil jako data prilozit<BR>

/dev/neco <BR> pricemz zarizeni neco bude disk s fs ISO blah o kapacite jednoho cd..<BR> Nebo skus prose cat /dev/cdrom > /newcd.img<BR> a pak ten img soubor zadat jako data .<BR> <BR>

[Oldrich Auda]

Pro vypalovani je nutne nepouzivat -dummy, tento prepinac je pro vyzkouseni, ale IMHO je dost nestastny, sam jsem s nim uz CD zkazil, nebot hlaska WARNING: Some drives don't like fixation in dummy mode je nekdy pravda, takove CD je potom v podstate znicene.

<BR> <BR>

Budu Vam vdecny za informaci, zda bez -dummy vypalovacka funguje. Vcetne multisession apod. Diky!

<BR> <BR>

O. Auda (auda@aow.cz)

[Michal Fortik]

V cdrtoaster-u jsem ten prepinac dummy nejak prehlid. Bez nej to pali skvele, zatim jsem zkousel audio a data, multisession ne. Dik moc za odpoved.<BR>

Michal Fortik<BR>

Jeste neco, dummy mi to CD-cko neznicil ;)