Dotaz: Náhodně se vyskytující černá obrazovka místo loginu

[paul2no]

Občas se mi stane, že po nabootování Xubuntu (14.04) se místo přihlašovací obrazovky zobrazí jen černá - ne že je monitor zhasnutý, ale zobrazuje černou plochu (nenaběhne Lightdm?). Jinak vypadá, že všechno funguje, takže řešení je restart přes terminál z tabletu, potom už to naběhne normálně. Na druhém notebooku se tohle dokonce někdy stane i jen po probuzení ze spánku (já u sebe spánek nepoužívám, takže nevím jestli i u mě by se to stávalo). Je fakt že ty předmětné notebooky jsou už pěkné vykopávky, tak nevím jestli to může být že si nerozumí HW a SW. Ovladače grafiky by měly být OK, navíc jeden má grafiku nVidia a druhý Intel. Ale i tak je divné, že se to děje jen někdy, čekal bych že když je problém tak to nebude fungovat vůbec. Zkoušel jsem se ptát Googla, ale nic jsem o tomhle problému nenašel. Nemáte nějakou radu, případně tip kde v jakém logu hledat? Děkuji.

---

---

Odpovědi

[Pavel 'TIGER' Růžička]

Začal bych kontrolou ventilátoru, jestli nejsou ucpané žebra chladiče prachem. Pokud jsou ucpané, tak se HW nadměrně zahřívá a může náhodně dělat jakékoliv neplechy.

Pokud je chladič průchozí, zkusil bych parametr jádra noapic.

Jinak v ~/.xsessions-errors nejsou žádné stopy? Tam bych asi začal a pokračoval ve /var/log/Xorg.0.log ... případně dále.

[paul2no]

Přehřátím to určitě nebude.

V těch uvedených lozích nevím, co bych měl hledat. Mám sem dát nějaké výpisy?

[Pavel 'TIGER' Růžička]

Hoď sem ty logy, v novinách stejně nic nepíšou.

[paul2no]

~/.xsession-errors

openConnection: connect: Adresář nebo soubor neexistuje
cannot connect to brltty at :0
Skript pro none spuštěn v run_im.
init: Disconnected from notified D-Bus bus

/tmp/log/Xorg.0.log

[    21.377] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    21.377] X Protocol Version 11, Revision 0
[    21.377] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    21.377] Current Operating System: Linux pavel-nb 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64
[    21.377] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=56f526bc-baab-426e-be48-cd5748e51a04 ro
[    21.377] Build Date: 16 April 2014  01:36:29PM
[    21.377] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[    21.377] Current version of pixman: 0.30.2
[    21.377] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    21.377] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug  4 08:38:23 2014
[    21.437] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.465] (==) No Layout section.  Using the first Screen section.
[    21.465] (==) No screen section available. Using defaults.
[    21.465] (**) |-->Screen "Default Screen Section" (0)
[    21.465] (**) |   |-->Monitor "< default monitor>"
[    21.466] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    21.466] (==) Automatically adding devices
[    21.466] (==) Automatically enabling devices
[    21.466] (==) Automatically adding GPU devices
[    21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    21.466] 	Entry deleted from font path.
[    21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    21.466] 	Entry deleted from font path.
[    21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    21.466] 	Entry deleted from font path.
[    21.466] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    21.466] 	Entry deleted from font path.
[    21.466] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    21.466] 	Entry deleted from font path.
[    21.466] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    21.466] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    21.466] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    21.466] (II) Loader magic: 0x7ff23e1cbd60
[    21.466] (II) Module ABI versions:
[    21.466] 	X.Org ANSI C Emulation: 0.4
[    21.466] 	X.Org Video Driver: 15.0
[    21.466] 	X.Org XInput driver : 20.0
[    21.466] 	X.Org Server Extension : 8.0
[    21.471] (--) PCI:*(0:1:0:0) 10de:0649:1025:0142 rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[    21.471] Initializing built-in extension Generic Event Extension
[    21.471] Initializing built-in extension SHAPE
[    21.471] Initializing built-in extension MIT-SHM
[    21.471] Initializing built-in extension XInputExtension
[    21.471] Initializing built-in extension XTEST
[    21.471] Initializing built-in extension BIG-REQUESTS
[    21.471] Initializing built-in extension SYNC
[    21.471] Initializing built-in extension XKEYBOARD
[    21.471] Initializing built-in extension XC-MISC
[    21.471] Initializing built-in extension SECURITY
[    21.471] Initializing built-in extension XINERAMA
[    21.471] Initializing built-in extension XFIXES
[    21.471] Initializing built-in extension RENDER
[    21.471] Initializing built-in extension RANDR
[    21.471] Initializing built-in extension COMPOSITE
[    21.471] Initializing built-in extension DAMAGE
[    21.471] Initializing built-in extension MIT-SCREEN-SAVER
[    21.471] Initializing built-in extension DOUBLE-BUFFER
[    21.471] Initializing built-in extension RECORD
[    21.471] Initializing built-in extension DPMS
[    21.471] Initializing built-in extension Present
[    21.471] Initializing built-in extension DRI3
[    21.471] Initializing built-in extension X-Resource
[    21.471] Initializing built-in extension XVideo
[    21.471] Initializing built-in extension XVideo-MotionCompensation
[    21.471] Initializing built-in extension SELinux
[    21.471] Initializing built-in extension XFree86-VidModeExtension
[    21.471] Initializing built-in extension XFree86-DGA
[    21.471] Initializing built-in extension XFree86-DRI
[    21.471] Initializing built-in extension DRI2
[    21.471] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    21.471] (II) "glx" will be loaded by default.
[    21.471] (WW) "xmir" is not to be loaded by default. Skipping.
[    21.471] (II) LoadModule: "glx"
[    21.471] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    21.769] (II) Module glx: vendor="NVIDIA Corporation"
[    21.769] 	compiled for 4.0.2, module version = 1.0.0
[    21.769] 	Module class: X.Org Server Extension
[    21.769] (II) NVIDIA GLX Module  304.117  Tue Nov 26 21:45:09 PST 2013
[    21.769] Loading extension GLX
[    21.769] (==) Matched nvidia as autoconfigured driver 0
[    21.769] (==) Matched nouveau as autoconfigured driver 1
[    21.769] (==) Matched modesetting as autoconfigured driver 2
[    21.769] (==) Matched fbdev as autoconfigured driver 3
[    21.769] (==) Matched vesa as autoconfigured driver 4
[    21.769] (==) Assigned the driver to the xf86ConfigLayout
[    21.769] (II) LoadModule: "nvidia"
[    21.769] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    21.770] (II) Module nvidia: vendor="NVIDIA Corporation"
[    21.770] 	compiled for 4.0.2, module version = 1.0.0
[    21.770] 	Module class: X.Org Video Driver
[    21.770] (II) LoadModule: "nouveau"
[    21.788] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    21.795] (II) Module nouveau: vendor="X.Org Foundation"
[    21.795] 	compiled for 1.15.0, module version = 1.0.10
[    21.795] 	Module class: X.Org Video Driver
[    21.795] 	ABI class: X.Org Video Driver, version 15.0
[    21.795] (II) LoadModule: "modesetting"
[    21.795] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    21.795] (II) Module modesetting: vendor="X.Org Foundation"
[    21.795] 	compiled for 1.15.0, module version = 0.8.1
[    21.795] 	Module class: X.Org Video Driver
[    21.795] 	ABI class: X.Org Video Driver, version 15.0
[    21.795] (II) LoadModule: "fbdev"
[    21.803] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    21.804] (II) Module fbdev: vendor="X.Org Foundation"
[    21.804] 	compiled for 1.15.0, module version = 0.4.4
[    21.804] 	Module class: X.Org Video Driver
[    21.804] 	ABI class: X.Org Video Driver, version 15.0
[    21.804] (II) LoadModule: "vesa"
[    21.807] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    21.807] (II) Module vesa: vendor="X.Org Foundation"
[    21.807] 	compiled for 1.15.0, module version = 2.3.3
[    21.807] 	Module class: X.Org Video Driver
[    21.807] 	ABI class: X.Org Video Driver, version 15.0
[    21.807] (II) NVIDIA dlloader X Driver  304.117  Tue Nov 26 21:27:08 PST 2013
[    21.807] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    21.807] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    21.807] (II) NOUVEAU driver for NVIDIA chipset families :
[    21.807] 	RIVA TNT        (NV04)
[    21.808] 	RIVA TNT2       (NV05)
[    21.808] 	GeForce 256     (NV10)
[    21.808] 	GeForce 2       (NV11, NV15)
[    21.808] 	GeForce 4MX     (NV17, NV18)
[    21.808] 	GeForce 3       (NV20)
[    21.808] 	GeForce 4Ti     (NV25, NV28)
[    21.808] 	GeForce FX      (NV3x)
[    21.808] 	GeForce 6       (NV4x)
[    21.808] 	GeForce 7       (G7x)
[    21.808] 	GeForce 8       (G8x)
[    21.808] 	GeForce GTX 200 (NVA0)
[    21.808] 	GeForce GTX 400 (NVC0)
[    21.808] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    21.808] (II) FBDEV: driver for framebuffer: fbdev
[    21.808] (II) VESA: driver for VESA chipsets: vesa
[    21.808] (++) using VT number 7

[    21.812] (II) Loading sub module "fb"
[    21.812] (II) LoadModule: "fb"
[    21.813] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.813] (II) Module fb: vendor="X.Org Foundation"
[    21.813] 	compiled for 1.15.1, module version = 1.0.0
[    21.813] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.813] (II) Loading sub module "wfb"
[    21.813] (II) LoadModule: "wfb"
[    21.828] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    21.829] (II) Module wfb: vendor="X.Org Foundation"
[    21.829] 	compiled for 1.15.1, module version = 1.0.0
[    21.829] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    21.829] (II) Loading sub module "ramdac"
[    21.829] (II) LoadModule: "ramdac"
[    21.829] (II) Module "ramdac" already built-in
[    21.829] (WW) Falling back to old probe method for modesetting
[    21.829] (EE) open /dev/dri/card0: No such file or directory
[    21.829] (WW) Falling back to old probe method for fbdev
[    21.829] (II) Loading sub module "fbdevhw"
[    21.829] (II) LoadModule: "fbdevhw"
[    21.829] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    21.829] (II) Module fbdevhw: vendor="X.Org Foundation"
[    21.829] 	compiled for 1.15.1, module version = 0.0.2
[    21.829] 	ABI class: X.Org Video Driver, version 15.0
[    21.829] (EE) open /dev/fb0: No such file or directory
[    21.829] (WW) Falling back to old probe method for vesa
[    21.829] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    21.829] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    21.829] (==) NVIDIA(0): RGB weight 888
[    21.829] (==) NVIDIA(0): Default visual is TrueColor
[    21.829] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    21.829] (**) NVIDIA(0): Enabling 2D acceleration
[    24.670] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    24.670] (II) NVIDIA(GPU-0):     Vision stereo.
[    24.674] (II) NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:1:0:0 (GPU-0)
[    24.674] (--) NVIDIA(0): Memory: 524288 kBytes
[    24.674] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.04
[    24.674] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    24.674] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    24.678] (--) NVIDIA(0): Valid display device(s) on GeForce 9600M GT at PCI:1:0:0
[    24.678] (--) NVIDIA(0):     CRT-0
[    24.678] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (connected)
[    24.678] (--) NVIDIA(0):     DFP-1
[    24.678] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    24.678] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[    24.678] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[    24.678] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    24.678] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    24.678] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    24.678] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    24.678] (**) NVIDIA(0):     been enabled on all display devices.)
[    24.679] (==) NVIDIA(0): 
[    24.679] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    24.679] (==) NVIDIA(0):     will be used as the requested mode.
[    24.679] (==) NVIDIA(0): 
[    24.679] (II) NVIDIA(0): Validated MetaModes:
[    24.679] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    24.679] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[    25.743] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[    25.743] (--) NVIDIA(0):     option
[    25.743] (II) UnloadModule: "nouveau"
[    25.743] (II) Unloading nouveau
[    25.744] (II) UnloadModule: "modesetting"
[    25.744] (II) Unloading modesetting
[    25.744] (II) UnloadModule: "fbdev"
[    25.744] (II) Unloading fbdev
[    25.744] (II) UnloadSubModule: "fbdevhw"
[    25.744] (II) Unloading fbdevhw
[    25.744] (II) UnloadModule: "vesa"
[    25.744] (II) Unloading vesa
[    25.744] (--) Depth 24 pixmap format is 32 bpp
[    25.744] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    25.757] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    26.049] Loading extension NV-GLX
[    26.075] (==) NVIDIA(0): Disabling shared memory pixmaps
[    26.075] (==) NVIDIA(0): Backing store enabled
[    26.075] (==) NVIDIA(0): Silken mouse enabled
[    26.075] (==) NVIDIA(0): DPMS enabled
[    26.075] Loading extension NV-CONTROL
[    26.075] Loading extension XINERAMA
[    26.075] (II) Loading sub module "dri2"
[    26.075] (II) LoadModule: "dri2"
[    26.075] (II) Module "dri2" already built-in
[    26.075] (II) NVIDIA(0): [DRI2] Setup complete
[    26.075] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    26.076] (--) RandR disabled
[    26.080] (II) SELinux: Disabled on system
[    26.081] (II) Initializing extension GLX
[    26.095] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    26.098] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.098] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.098] (II) LoadModule: "evdev"
[    26.098] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.115] (II) Module evdev: vendor="X.Org Foundation"
[    26.115] 	compiled for 1.15.0, module version = 2.8.2
[    26.115] 	Module class: X.Org XInput Driver
[    26.115] 	ABI class: X.Org XInput driver, version 20.0
[    26.115] (II) Using input driver 'evdev' for 'Power Button'
[    26.115] (**) Power Button: always reports core events
[    26.115] (**) evdev: Power Button: Device: "/dev/input/event3"
[    26.116] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.116] (--) evdev: Power Button: Found keys
[    26.116] (II) evdev: Power Button: Configuring as keyboard
[    26.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    26.116] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.116] (**) Option "xkb_rules" "evdev"
[    26.116] (**) Option "xkb_model" "pc105"
[    26.116] (**) Option "xkb_layout" "cz"
[    26.117] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    26.118] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    26.118] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.118] (II) Using input driver 'evdev' for 'Video Bus'
[    26.118] (**) Video Bus: always reports core events
[    26.118] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    26.118] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.118] (--) evdev: Video Bus: Found keys
[    26.118] (II) evdev: Video Bus: Configuring as keyboard
[    26.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input14/event7"
[    26.118] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.118] (**) Option "xkb_rules" "evdev"
[    26.118] (**) Option "xkb_model" "pc105"
[    26.118] (**) Option "xkb_layout" "cz"
[    26.118] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    26.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.118] (II) Using input driver 'evdev' for 'Power Button'
[    26.119] (**) Power Button: always reports core events
[    26.119] (**) evdev: Power Button: Device: "/dev/input/event1"
[    26.119] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.119] (--) evdev: Power Button: Found keys
[    26.119] (II) evdev: Power Button: Configuring as keyboard
[    26.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    26.119] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.119] (**) Option "xkb_rules" "evdev"
[    26.119] (**) Option "xkb_model" "pc105"
[    26.119] (**) Option "xkb_layout" "cz"
[    26.119] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    26.119] (II) No input driver specified, ignoring this device.
[    26.119] (II) This device may have been added with another device file.
[    26.119] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.119] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.119] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.119] (**) Sleep Button: always reports core events
[    26.119] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    26.119] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.119] (--) evdev: Sleep Button: Found keys
[    26.119] (II) evdev: Sleep Button: Configuring as keyboard
[    26.119] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    26.119] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.119] (**) Option "xkb_rules" "evdev"
[    26.120] (**) Option "xkb_model" "pc105"
[    26.120] (**) Option "xkb_layout" "cz"
[    26.120] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event13)
[    26.120] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[    26.120] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam'
[    26.120] (**) Acer Crystal Eye webcam: always reports core events
[    26.120] (**) evdev: Acer Crystal Eye webcam: Device: "/dev/input/event13"
[    26.120] (--) evdev: Acer Crystal Eye webcam: Vendor 0x64e Product 0xa103
[    26.120] (--) evdev: Acer Crystal Eye webcam: Found keys
[    26.120] (II) evdev: Acer Crystal Eye webcam: Configuring as keyboard
[    26.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input20/event13"
[    26.120] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD, id 10)
[    26.120] (**) Option "xkb_rules" "evdev"
[    26.120] (**) Option "xkb_model" "pc105"
[    26.120] (**) Option "xkb_layout" "cz"
[    26.121] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[    26.121] (II) No input driver specified, ignoring this device.
[    26.121] (II) This device may have been added with another device file.
[    26.121] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event10)
[    26.121] (II) No input driver specified, ignoring this device.
[    26.121] (II) This device may have been added with another device file.
[    26.121] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[    26.121] (II) No input driver specified, ignoring this device.
[    26.121] (II) This device may have been added with another device file.
[    26.121] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 Phantom (/dev/input/event8)
[    26.121] (II) No input driver specified, ignoring this device.
[    26.121] (II) This device may have been added with another device file.
[    26.122] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[    26.122] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    26.122] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    26.122] (**) USB Optical Mouse: always reports core events
[    26.122] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[    26.122] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[    26.122] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[    26.122] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[    26.122] (--) evdev: USB Optical Mouse: Found relative axes
[    26.122] (--) evdev: USB Optical Mouse: Found x and y relative axes
[    26.122] (II) evdev: USB Optical Mouse: Configuring as mouse
[    26.122] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[    26.122] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    26.122] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input13/event6"
[    26.122] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[    26.122] (II) evdev: USB Optical Mouse: initialized for relative axes.
[    26.122] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    26.122] (**) USB Optical Mouse: (accel) acceleration profile 0
[    26.122] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    26.122] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    26.122] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[    26.122] (II) No input driver specified, ignoring this device.
[    26.122] (II) This device may have been added with another device file.
[    26.123] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    26.123] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.123] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.123] (**) AT Translated Set 2 keyboard: always reports core events
[    26.123] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    26.123] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.123] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.123] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.123] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    26.123] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    26.123] (**) Option "xkb_rules" "evdev"
[    26.123] (**) Option "xkb_model" "pc105"
[    26.123] (**) Option "xkb_layout" "cz"
[    26.123] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[    26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    26.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    26.123] (II) LoadModule: "synaptics"
[    26.124] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.124] (II) Module synaptics: vendor="X.Org Foundation"
[    26.124] 	compiled for 1.15.0, module version = 1.7.4
[    26.124] 	Module class: X.Org XInput Driver
[    26.124] 	ABI class: X.Org XInput driver, version 20.0
[    26.124] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    26.124] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.124] (**) Option "Device" "/dev/input/event5"
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 59)
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 109)
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right scroll-buttons
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    26.144] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.144] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event5"
[    26.160] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    26.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[    26.160] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    26.160] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    26.160] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.160] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    26.160] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event12)
[    26.162] (II) No input driver specified, ignoring this device.
[    26.162] (II) This device may have been added with another device file.
[    26.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[    26.162] (II) No input driver specified, ignoring this device.
[    26.162] (II) This device may have been added with another device file.
[    38.214] (II) XKB: reuse xkmfile /var/lib/xkb/server-15659461D8B9AC515B1091E099D8EE9DC1634218.xkm
[    45.350] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[    45.350] (II) NVIDIA(GPU-0):     Vision stereo.
[    45.350] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    45.350] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[    45.350] (**) NVIDIA(0):     been enabled on all display devices.)
[  7011.675] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[  7013.040] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 11769.049] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 11770.428] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14536.256] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 14537.617] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 18857.097] (II) config/udev: removing device USB Optical Mouse
[ 18857.099] (II) evdev: USB Optical Mouse: Close
[ 18857.099] (II) UnloadModule: "evdev"
[ 18863.207] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 18863.207] (II) No input driver specified, ignoring this device.
[ 18863.207] (II) This device may have been added with another device file.
[ 18863.209] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 18863.209] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 18863.209] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 18863.209] (**) USB Optical Mouse: always reports core events
[ 18863.209] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 18863.209] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 18863.209] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 18863.209] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 18863.209] (--) evdev: USB Optical Mouse: Found relative axes
[ 18863.209] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 18863.210] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 18863.210] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 18863.210] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 18863.210] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18863.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input21/event6"
[ 18863.210] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 18863.210] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 18863.210] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 18863.210] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 18863.210] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 18863.210] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 19139.409] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 19140.774] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 21272.061] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 21272.061] (II) NVIDIA(GPU-0):     Vision stereo.
[ 21272.061] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 21272.061] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 21272.061] (**) NVIDIA(0):     been enabled on all display devices.)
[ 21272.086] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 21272.086] (II) NVIDIA(GPU-0):     Vision stereo.
[ 21272.086] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 21272.086] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 21272.086] (**) NVIDIA(0):     been enabled on all display devices.)
[ 21272.091] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 21272.091] (II) NVIDIA(GPU-0):     Vision stereo.
[ 21272.091] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 21272.091] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 21272.091] (**) NVIDIA(0):     been enabled on all display devices.)
[ 22928.661] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 22928.661] (II) NVIDIA(GPU-0):     Vision stereo.
[ 22928.661] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 22928.661] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 22928.661] (**) NVIDIA(0):     been enabled on all display devices.)
[ 26873.333] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 26874.711] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 27077.796] (II) config/udev: removing device USB Optical Mouse
[ 27077.816] (II) evdev: USB Optical Mouse: Close
[ 27077.817] (II) UnloadModule: "evdev"
[ 27083.430] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 27083.430] (II) No input driver specified, ignoring this device.
[ 27083.430] (II) This device may have been added with another device file.
[ 27083.431] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 27083.431] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27083.431] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 27083.431] (**) USB Optical Mouse: always reports core events
[ 27083.431] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 27083.431] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 27083.431] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 27083.431] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 27083.431] (--) evdev: USB Optical Mouse: Found relative axes
[ 27083.431] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 27083.431] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 27083.431] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 27083.431] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27083.431] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27083.431] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input22/event6"
[ 27083.431] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 27083.431] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 27083.431] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27083.431] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 27083.431] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27083.431] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 28848.520] (II) config/udev: removing device USB Optical Mouse
[ 28848.537] (II) evdev: USB Optical Mouse: Close
[ 28848.537] (II) UnloadModule: "evdev"
[ 28854.152] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 28854.152] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 28854.152] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 28854.152] (**) USB Optical Mouse: always reports core events
[ 28854.152] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 28854.152] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 28854.152] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 28854.153] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 28854.153] (--) evdev: USB Optical Mouse: Found relative axes
[ 28854.153] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 28854.153] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 28854.153] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 28854.153] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 28854.153] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28854.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input23/event6"
[ 28854.153] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 28854.153] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 28854.153] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 28854.153] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 28854.153] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 28854.153] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 28854.153] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 28854.153] (II) No input driver specified, ignoring this device.
[ 28854.153] (II) This device may have been added with another device file.
[ 29134.957] (II) config/udev: removing device USB Optical Mouse
[ 29134.976] (II) evdev: USB Optical Mouse: Close
[ 29134.976] (II) UnloadModule: "evdev"
[ 29140.817] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29140.817] (II) No input driver specified, ignoring this device.
[ 29140.817] (II) This device may have been added with another device file.
[ 29140.818] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29140.819] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29140.819] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29140.819] (**) USB Optical Mouse: always reports core events
[ 29140.819] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29140.819] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29140.819] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29140.819] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29140.819] (--) evdev: USB Optical Mouse: Found relative axes
[ 29140.819] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29140.819] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29140.819] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29140.819] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29140.819] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29140.819] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input24/event6"
[ 29140.819] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29140.819] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29140.819] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29140.819] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29140.819] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29140.819] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29179.592] (II) config/udev: removing device USB Optical Mouse
[ 29179.612] (II) evdev: USB Optical Mouse: Close
[ 29179.612] (II) UnloadModule: "evdev"
[ 29185.508] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29185.508] (II) No input driver specified, ignoring this device.
[ 29185.508] (II) This device may have been added with another device file.
[ 29185.510] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29185.510] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29185.510] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29185.510] (**) USB Optical Mouse: always reports core events
[ 29185.510] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29185.510] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29185.510] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29185.510] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29185.510] (--) evdev: USB Optical Mouse: Found relative axes
[ 29185.510] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29185.510] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29185.510] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29185.510] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29185.510] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29185.510] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input25/event6"
[ 29185.510] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29185.510] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29185.510] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29185.510] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29185.510] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29185.510] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29192.002] (II) config/udev: removing device USB Optical Mouse
[ 29192.018] (II) evdev: USB Optical Mouse: Close
[ 29192.018] (II) UnloadModule: "evdev"
[ 29197.770] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29197.770] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29197.770] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29197.770] (**) USB Optical Mouse: always reports core events
[ 29197.770] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29197.776] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29197.776] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29197.776] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29197.776] (--) evdev: USB Optical Mouse: Found relative axes
[ 29197.776] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29197.776] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29197.776] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29197.776] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29197.776] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29197.776] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input26/event6"
[ 29197.776] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29197.776] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29197.776] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29197.776] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29197.776] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29197.776] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29197.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29197.777] (II) No input driver specified, ignoring this device.
[ 29197.777] (II) This device may have been added with another device file.
[ 29205.136] (II) config/udev: removing device USB Optical Mouse
[ 29205.156] (II) evdev: USB Optical Mouse: Close
[ 29205.156] (II) UnloadModule: "evdev"
[ 29210.686] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29210.686] (II) No input driver specified, ignoring this device.
[ 29210.686] (II) This device may have been added with another device file.
[ 29210.688] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29210.688] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29210.688] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29210.688] (**) USB Optical Mouse: always reports core events
[ 29210.688] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29210.692] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29210.692] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29210.692] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29210.692] (--) evdev: USB Optical Mouse: Found relative axes
[ 29210.692] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29210.692] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29210.692] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29210.692] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29210.692] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29210.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input27/event6"
[ 29210.692] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29210.692] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29210.692] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29210.692] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29210.692] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29210.692] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29212.089] (II) config/udev: removing device USB Optical Mouse
[ 29212.104] (II) evdev: USB Optical Mouse: Close
[ 29212.104] (II) UnloadModule: "evdev"
[ 29217.866] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29217.866] (II) No input driver specified, ignoring this device.
[ 29217.866] (II) This device may have been added with another device file.
[ 29217.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29217.868] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29217.868] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29217.868] (**) USB Optical Mouse: always reports core events
[ 29217.868] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29217.868] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29217.868] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29217.868] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29217.869] (--) evdev: USB Optical Mouse: Found relative axes
[ 29217.869] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29217.869] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29217.869] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29217.869] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29217.869] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29217.869] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input28/event6"
[ 29217.869] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29217.869] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29217.869] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29217.869] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29217.869] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29217.869] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29225.730] (II) config/udev: removing device USB Optical Mouse
[ 29225.748] (II) evdev: USB Optical Mouse: Close
[ 29225.748] (II) UnloadModule: "evdev"
[ 29231.652] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29231.652] (II) No input driver specified, ignoring this device.
[ 29231.652] (II) This device may have been added with another device file.
[ 29231.653] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29231.653] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29231.653] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29231.653] (**) USB Optical Mouse: always reports core events
[ 29231.653] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29231.653] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29231.653] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29231.653] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29231.653] (--) evdev: USB Optical Mouse: Found relative axes
[ 29231.653] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29231.653] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29231.653] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29231.653] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29231.653] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29231.653] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input29/event6"
[ 29231.653] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29231.653] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29231.653] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29231.653] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29231.653] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29231.653] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29233.665] (II) config/udev: removing device USB Optical Mouse
[ 29233.677] (II) evdev: USB Optical Mouse: Close
[ 29233.677] (II) UnloadModule: "evdev"
[ 29239.539] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29239.539] (II) No input driver specified, ignoring this device.
[ 29239.539] (II) This device may have been added with another device file.
[ 29239.542] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29239.542] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29239.542] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29239.542] (**) USB Optical Mouse: always reports core events
[ 29239.542] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29239.542] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29239.542] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29239.542] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29239.542] (--) evdev: USB Optical Mouse: Found relative axes
[ 29239.542] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29239.542] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29239.542] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29239.542] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29239.542] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29239.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input30/event6"
[ 29239.542] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29239.542] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29239.542] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29239.542] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29239.542] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29239.542] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29240.108] (II) config/udev: removing device USB Optical Mouse
[ 29240.116] (II) evdev: USB Optical Mouse: Close
[ 29240.116] (II) UnloadModule: "evdev"
[ 29245.926] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29245.926] (II) No input driver specified, ignoring this device.
[ 29245.926] (II) This device may have been added with another device file.
[ 29245.930] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29245.930] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29245.930] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29245.930] (**) USB Optical Mouse: always reports core events
[ 29245.930] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29245.930] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29245.930] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29245.930] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29245.930] (--) evdev: USB Optical Mouse: Found relative axes
[ 29245.930] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29245.930] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29245.930] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29245.930] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29245.930] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29245.930] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input31/event6"
[ 29245.930] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29245.930] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29245.930] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29245.930] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29245.930] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29245.930] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29254.744] (II) config/udev: removing device USB Optical Mouse
[ 29254.765] (II) evdev: USB Optical Mouse: Close
[ 29254.765] (II) UnloadModule: "evdev"
[ 29260.698] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29260.698] (II) No input driver specified, ignoring this device.
[ 29260.698] (II) This device may have been added with another device file.
[ 29260.702] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29260.702] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29260.702] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29260.702] (**) USB Optical Mouse: always reports core events
[ 29260.702] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29260.704] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29260.704] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29260.704] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29260.704] (--) evdev: USB Optical Mouse: Found relative axes
[ 29260.704] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29260.704] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29260.704] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29260.704] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29260.704] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29260.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input32/event6"
[ 29260.704] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29260.704] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29260.704] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29260.704] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29260.704] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29260.704] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29270.860] (II) config/udev: removing device USB Optical Mouse
[ 29270.877] (II) evdev: USB Optical Mouse: Close
[ 29270.877] (II) UnloadModule: "evdev"
[ 29276.783] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29276.783] (II) No input driver specified, ignoring this device.
[ 29276.783] (II) This device may have been added with another device file.
[ 29276.785] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29276.785] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29276.785] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29276.785] (**) USB Optical Mouse: always reports core events
[ 29276.785] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29276.785] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29276.785] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29276.785] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29276.785] (--) evdev: USB Optical Mouse: Found relative axes
[ 29276.785] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29276.785] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29276.785] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29276.786] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29276.786] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29276.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input33/event6"
[ 29276.786] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29276.786] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29276.786] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29276.786] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29276.786] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29276.786] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29280.036] (II) config/udev: removing device USB Optical Mouse
[ 29280.049] (II) evdev: USB Optical Mouse: Close
[ 29280.049] (II) UnloadModule: "evdev"
[ 29285.884] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29285.884] (II) No input driver specified, ignoring this device.
[ 29285.884] (II) This device may have been added with another device file.
[ 29285.884] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29285.884] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29285.884] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29285.884] (**) USB Optical Mouse: always reports core events
[ 29285.884] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29285.896] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29285.896] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29285.896] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29285.896] (--) evdev: USB Optical Mouse: Found relative axes
[ 29285.896] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29285.896] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29285.896] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29285.896] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29285.896] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29285.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input34/event6"
[ 29285.896] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29285.896] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29285.896] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29285.896] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29285.896] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29285.896] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29295.417] (II) config/udev: removing device USB Optical Mouse
[ 29295.429] (II) evdev: USB Optical Mouse: Close
[ 29295.429] (II) UnloadModule: "evdev"
[ 29300.940] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29300.940] (II) No input driver specified, ignoring this device.
[ 29300.940] (II) This device may have been added with another device file.
[ 29300.944] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29300.944] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29300.944] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29300.944] (**) USB Optical Mouse: always reports core events
[ 29300.944] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29300.944] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29300.944] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29300.944] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29300.944] (--) evdev: USB Optical Mouse: Found relative axes
[ 29300.944] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29300.944] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29300.944] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29300.944] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29300.944] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29300.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input35/event6"
[ 29300.944] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29300.944] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29300.944] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29300.944] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29300.944] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29300.944] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29301.364] (II) config/udev: removing device USB Optical Mouse
[ 29301.385] (II) evdev: USB Optical Mouse: Close
[ 29301.385] (II) UnloadModule: "evdev"
[ 29307.381] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29307.381] (II) No input driver specified, ignoring this device.
[ 29307.381] (II) This device may have been added with another device file.
[ 29307.385] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29307.385] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29307.385] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29307.385] (**) USB Optical Mouse: always reports core events
[ 29307.385] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29307.385] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29307.385] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29307.385] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29307.385] (--) evdev: USB Optical Mouse: Found relative axes
[ 29307.385] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29307.385] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29307.385] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29307.385] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29307.385] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29307.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input36/event6"
[ 29307.385] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29307.385] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29307.385] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29307.385] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29307.385] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29307.385] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29330.381] (II) config/udev: removing device USB Optical Mouse
[ 29330.392] (II) evdev: USB Optical Mouse: Close
[ 29330.392] (II) UnloadModule: "evdev"
[ 29336.013] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29336.013] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29336.013] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29336.013] (**) USB Optical Mouse: always reports core events
[ 29336.013] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29336.020] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29336.020] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29336.020] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29336.020] (--) evdev: USB Optical Mouse: Found relative axes
[ 29336.020] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29336.020] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29336.020] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29336.020] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29336.020] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29336.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input37/event6"
[ 29336.020] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29336.020] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29336.020] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29336.020] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29336.020] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29336.020] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29336.021] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29336.021] (II) No input driver specified, ignoring this device.
[ 29336.021] (II) This device may have been added with another device file.
[ 29348.737] (II) config/udev: removing device USB Optical Mouse
[ 29348.753] (II) evdev: USB Optical Mouse: Close
[ 29348.753] (II) UnloadModule: "evdev"
[ 29354.247] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29354.247] (II) No input driver specified, ignoring this device.
[ 29354.247] (II) This device may have been added with another device file.
[ 29354.247] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29354.247] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29354.247] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29354.247] (**) USB Optical Mouse: always reports core events
[ 29354.247] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29354.247] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29354.247] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29354.247] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29354.247] (--) evdev: USB Optical Mouse: Found relative axes
[ 29354.247] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29354.247] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29354.247] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29354.247] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29354.247] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29354.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input38/event6"
[ 29354.247] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29354.248] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29354.248] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29354.248] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29354.248] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29354.248] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29361.877] (II) config/udev: removing device USB Optical Mouse
[ 29361.896] (II) evdev: USB Optical Mouse: Close
[ 29361.896] (II) UnloadModule: "evdev"
[ 29367.609] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29367.609] (II) No input driver specified, ignoring this device.
[ 29367.609] (II) This device may have been added with another device file.
[ 29367.612] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29367.612] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29367.612] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29367.612] (**) USB Optical Mouse: always reports core events
[ 29367.612] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29367.612] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29367.612] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29367.612] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29367.612] (--) evdev: USB Optical Mouse: Found relative axes
[ 29367.612] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29367.612] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29367.612] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29367.612] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29367.612] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29367.612] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input39/event6"
[ 29367.612] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29367.613] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29367.613] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29367.613] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29367.613] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29367.613] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29383.701] (II) config/udev: removing device USB Optical Mouse
[ 29383.713] (II) evdev: USB Optical Mouse: Close
[ 29383.714] (II) UnloadModule: "evdev"
[ 29389.367] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29389.367] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29389.367] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29389.367] (**) USB Optical Mouse: always reports core events
[ 29389.367] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29389.380] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29389.380] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29389.380] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29389.380] (--) evdev: USB Optical Mouse: Found relative axes
[ 29389.380] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29389.380] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29389.380] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29389.380] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29389.380] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29389.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input40/event6"
[ 29389.380] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29389.380] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29389.380] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29389.380] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29389.380] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29389.380] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29389.381] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29389.381] (II) No input driver specified, ignoring this device.
[ 29389.381] (II) This device may have been added with another device file.
[ 29395.105] (II) config/udev: removing device USB Optical Mouse
[ 29395.112] (II) evdev: USB Optical Mouse: Close
[ 29395.112] (II) UnloadModule: "evdev"
[ 29400.766] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29400.766] (II) No input driver specified, ignoring this device.
[ 29400.766] (II) This device may have been added with another device file.
[ 29400.769] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29400.769] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29400.769] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29400.769] (**) USB Optical Mouse: always reports core events
[ 29400.769] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29400.769] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29400.769] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29400.769] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29400.769] (--) evdev: USB Optical Mouse: Found relative axes
[ 29400.769] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29400.769] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29400.769] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29400.769] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29400.769] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29400.769] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input41/event6"
[ 29400.769] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29400.769] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29400.769] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29400.769] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29400.769] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29400.769] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29404.530] (II) config/udev: removing device USB Optical Mouse
[ 29404.544] (II) evdev: USB Optical Mouse: Close
[ 29404.544] (II) UnloadModule: "evdev"
[ 29410.017] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29410.017] (II) No input driver specified, ignoring this device.
[ 29410.017] (II) This device may have been added with another device file.
[ 29410.020] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29410.020] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29410.020] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29410.020] (**) USB Optical Mouse: always reports core events
[ 29410.020] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29410.020] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29410.020] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29410.020] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29410.020] (--) evdev: USB Optical Mouse: Found relative axes
[ 29410.020] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29410.020] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29410.020] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29410.020] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29410.020] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29410.020] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input42/event6"
[ 29410.020] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29410.021] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29410.021] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29410.021] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29410.021] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29410.021] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29420.152] (II) config/udev: removing device USB Optical Mouse
[ 29420.156] (II) evdev: USB Optical Mouse: Close
[ 29420.156] (II) UnloadModule: "evdev"
[ 29425.833] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29425.833] (II) No input driver specified, ignoring this device.
[ 29425.833] (II) This device may have been added with another device file.
[ 29425.844] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29425.844] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29425.844] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29425.844] (**) USB Optical Mouse: always reports core events
[ 29425.844] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29425.844] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29425.844] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29425.844] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29425.844] (--) evdev: USB Optical Mouse: Found relative axes
[ 29425.844] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29425.844] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29425.844] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29425.844] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29425.844] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29425.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input43/event6"
[ 29425.844] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29425.844] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29425.844] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29425.844] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29425.844] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29425.844] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29428.096] (II) config/udev: removing device USB Optical Mouse
[ 29428.112] (II) evdev: USB Optical Mouse: Close
[ 29428.112] (II) UnloadModule: "evdev"
[ 29433.803] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29433.803] (II) No input driver specified, ignoring this device.
[ 29433.803] (II) This device may have been added with another device file.
[ 29433.812] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29433.812] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29433.812] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29433.812] (**) USB Optical Mouse: always reports core events
[ 29433.812] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29433.812] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29433.812] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29433.812] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29433.812] (--) evdev: USB Optical Mouse: Found relative axes
[ 29433.812] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29433.812] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29433.812] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29433.812] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29433.812] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29433.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input44/event6"
[ 29433.812] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29433.813] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29433.813] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29433.813] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29433.813] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29433.813] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29434.536] (II) config/udev: removing device USB Optical Mouse
[ 29434.551] (II) evdev: USB Optical Mouse: Close
[ 29434.551] (II) UnloadModule: "evdev"
[ 29440.510] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29440.510] (II) No input driver specified, ignoring this device.
[ 29440.510] (II) This device may have been added with another device file.
[ 29440.513] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29440.513] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29440.513] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29440.513] (**) USB Optical Mouse: always reports core events
[ 29440.513] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29440.513] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29440.513] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29440.513] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29440.513] (--) evdev: USB Optical Mouse: Found relative axes
[ 29440.513] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29440.513] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29440.513] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29440.513] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29440.513] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29440.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input45/event6"
[ 29440.513] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29440.513] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29440.513] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29440.513] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29440.513] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29440.513] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29448.177] (II) config/udev: removing device USB Optical Mouse
[ 29448.189] (II) evdev: USB Optical Mouse: Close
[ 29448.189] (II) UnloadModule: "evdev"
[ 29453.811] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29453.811] (II) No input driver specified, ignoring this device.
[ 29453.811] (II) This device may have been added with another device file.
[ 29453.814] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29453.814] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29453.814] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29453.814] (**) USB Optical Mouse: always reports core events
[ 29453.814] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29453.814] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29453.814] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29453.814] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29453.814] (--) evdev: USB Optical Mouse: Found relative axes
[ 29453.814] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29453.814] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29453.814] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29453.814] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29453.814] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29453.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input46/event6"
[ 29453.814] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29453.814] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29453.814] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29453.814] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29453.814] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29453.814] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29457.852] (II) config/udev: removing device USB Optical Mouse
[ 29457.864] (II) evdev: USB Optical Mouse: Close
[ 29457.864] (II) UnloadModule: "evdev"
[ 29463.526] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29463.526] (II) No input driver specified, ignoring this device.
[ 29463.526] (II) This device may have been added with another device file.
[ 29463.529] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29463.529] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29463.529] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29463.529] (**) USB Optical Mouse: always reports core events
[ 29463.529] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29463.529] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29463.529] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29463.529] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29463.529] (--) evdev: USB Optical Mouse: Found relative axes
[ 29463.529] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29463.529] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29463.529] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29463.529] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29463.529] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29463.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input47/event6"
[ 29463.529] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29463.529] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29463.530] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29463.530] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29463.530] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29463.530] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29475.709] (II) config/udev: removing device USB Optical Mouse
[ 29475.722] (II) evdev: USB Optical Mouse: Close
[ 29475.722] (II) UnloadModule: "evdev"
[ 29481.505] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29481.505] (II) No input driver specified, ignoring this device.
[ 29481.505] (II) This device may have been added with another device file.
[ 29481.509] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29481.509] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29481.509] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29481.509] (**) USB Optical Mouse: always reports core events
[ 29481.509] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29481.509] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29481.509] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29481.509] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29481.509] (--) evdev: USB Optical Mouse: Found relative axes
[ 29481.509] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29481.509] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29481.509] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29481.509] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29481.509] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29481.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input48/event6"
[ 29481.509] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29481.509] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29481.509] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29481.509] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29481.509] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29481.509] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29491.337] (II) config/udev: removing device USB Optical Mouse
[ 29491.352] (II) evdev: USB Optical Mouse: Close
[ 29491.352] (II) UnloadModule: "evdev"
[ 29496.929] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29496.929] (II) No input driver specified, ignoring this device.
[ 29496.929] (II) This device may have been added with another device file.
[ 29496.931] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29496.931] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29496.931] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29496.931] (**) USB Optical Mouse: always reports core events
[ 29496.931] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29496.931] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29496.931] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29496.931] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29496.931] (--) evdev: USB Optical Mouse: Found relative axes
[ 29496.931] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29496.931] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29496.931] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29496.931] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29496.931] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29496.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input49/event6"
[ 29496.931] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29496.931] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29496.931] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29496.931] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29496.931] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29496.931] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29507.205] (II) config/udev: removing device USB Optical Mouse
[ 29507.228] (II) evdev: USB Optical Mouse: Close
[ 29507.228] (II) UnloadModule: "evdev"
[ 29513.131] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29513.131] (II) No input driver specified, ignoring this device.
[ 29513.131] (II) This device may have been added with another device file.
[ 29513.133] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29513.133] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29513.133] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29513.133] (**) USB Optical Mouse: always reports core events
[ 29513.133] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29513.133] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29513.133] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29513.133] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29513.133] (--) evdev: USB Optical Mouse: Found relative axes
[ 29513.133] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29513.133] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29513.133] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29513.133] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29513.133] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29513.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input50/event6"
[ 29513.133] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29513.133] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29513.134] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29513.134] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29513.134] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29513.134] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29517.372] (II) config/udev: removing device USB Optical Mouse
[ 29517.384] (II) evdev: USB Optical Mouse: Close
[ 29517.384] (II) UnloadModule: "evdev"
[ 29522.885] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29522.885] (II) No input driver specified, ignoring this device.
[ 29522.885] (II) This device may have been added with another device file.
[ 29522.887] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29522.887] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29522.887] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29522.887] (**) USB Optical Mouse: always reports core events
[ 29522.887] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29522.900] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29522.900] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29522.900] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29522.900] (--) evdev: USB Optical Mouse: Found relative axes
[ 29522.900] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29522.900] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29522.900] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29522.900] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29522.900] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29522.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input51/event6"
[ 29522.900] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29522.900] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29522.900] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29522.900] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29522.900] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29522.900] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29530.022] (II) config/udev: removing device USB Optical Mouse
[ 29530.040] (II) evdev: USB Optical Mouse: Close
[ 29530.040] (II) UnloadModule: "evdev"
[ 29535.616] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 29535.616] (II) No input driver specified, ignoring this device.
[ 29535.616] (II) This device may have been added with another device file.
[ 29535.618] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 29535.618] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 29535.618] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 29535.618] (**) USB Optical Mouse: always reports core events
[ 29535.618] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 29535.618] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 29535.618] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 29535.618] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 29535.618] (--) evdev: USB Optical Mouse: Found relative axes
[ 29535.618] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 29535.618] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 29535.618] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 29535.618] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 29535.618] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29535.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input52/event6"
[ 29535.618] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 29535.619] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 29535.619] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 29535.619] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 29535.619] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 29535.619] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 29979.995] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 29981.378] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 31739.457] (II) config/udev: removing device USB Optical Mouse
[ 31739.472] (II) evdev: USB Optical Mouse: Close
[ 31739.472] (II) UnloadModule: "evdev"
[ 31745.234] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 31745.234] (II) No input driver specified, ignoring this device.
[ 31745.234] (II) This device may have been added with another device file.
[ 31745.234] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 31745.234] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 31745.234] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 31745.234] (**) USB Optical Mouse: always reports core events
[ 31745.234] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 31745.234] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 31745.234] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 31745.234] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 31745.234] (--) evdev: USB Optical Mouse: Found relative axes
[ 31745.234] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 31745.234] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 31745.234] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 31745.234] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 31745.234] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31745.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input53/event6"
[ 31745.235] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 31745.235] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 31745.235] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 31745.235] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 31745.235] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 31745.235] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 35085.218] (II) config/udev: removing device USB Optical Mouse
[ 35085.232] (II) evdev: USB Optical Mouse: Close
[ 35085.232] (II) UnloadModule: "evdev"
[ 35090.889] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 35090.889] (II) No input driver specified, ignoring this device.
[ 35090.889] (II) This device may have been added with another device file.
[ 35090.893] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[ 35090.893] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 35090.893] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 35090.893] (**) USB Optical Mouse: always reports core events
[ 35090.893] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[ 35090.893] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 35090.893] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 35090.894] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 35090.894] (--) evdev: USB Optical Mouse: Found relative axes
[ 35090.894] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 35090.894] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 35090.894] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 35090.894] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 35090.894] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35090.894] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input54/event6"
[ 35090.894] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 35090.894] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 35090.894] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 35090.894] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 35090.894] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 35090.894] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 37373.651] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 37373.651] (II) NVIDIA(GPU-0):     Vision stereo.
[ 37373.651] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 37373.651] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 37373.651] (**) NVIDIA(0):     been enabled on all display devices.)
[ 37535.421] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 37535.421] (II) NVIDIA(GPU-0):     Vision stereo.
[ 37535.421] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 37535.421] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 37535.421] (**) NVIDIA(0):     been enabled on all display devices.)
[ 39088.570] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 39089.970] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40462.909] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 40464.296] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46308.922] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 46310.291] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 48871.490] (II) evdev: USB Optical Mouse: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) UnloadModule: "synaptics"
[ 48871.490] (II) evdev: AT Translated Set 2 keyboard: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) evdev: Acer Crystal Eye webcam: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) evdev: Sleep Button: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) evdev: Power Button: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) evdev: Video Bus: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48871.490] (II) evdev: Power Button: Close
[ 48871.490] (II) UnloadModule: "evdev"
[ 48873.697] (EE) Server terminated successfully (0). Closing log file.

[Pavel 'TIGER' Růžička]

Hele a děje se to u displaye notebooku, nebo u externího monitoru anebo u obojího?

[paul2no]

Přímo u displeje notebooku. Externí monitor na kterém bych to mohl odzkoušet tu ani nemám, max. televizi (přes HDMI).

[Pavel 'TIGER' Růžička]

Ha, tak to jsem jeden řádek pochopil špatně. Vypadalo to, jako když k tomu máš připojené externí zobrazovací zařízení. Nicméně, jak píše kolega dole. Hoď sem log z /var/log/lightdm. Pro začátek lightdm.log.

[paul2no]

Koukal jsem do logu x-0-greeter.log a vidím tam, že se nepovedlo načíst wallpaper. Může to mít něco společného? Je fakt, že některá pozadí se mi zobrazují i na přihlašovací/zamykací obrazovce, jiná ne. A možná je fakt že si neuvědomuju, že bych tenhle problém měl, když jsem měl pozadí co se zobrazovalo i pod přihlašovacím dialogem.

** (lightdm-gtk-greeter:1647): WARNING **: Failed to load user background: Nelze otevřít soubor „/home/paul/Galerie/Wallpapers/wp22babyept1440.JPG“: Operace zamítnuta

** (lightdm-gtk-greeter:1647): WARNING **: Failed to load user image: Nelze otevřít soubor „/home/paul/.face“: Adresář nebo soubor neexistuje
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
init: Proces indicator-messages main skončil, spouštím znovu
init: Proces indicator-power main (1688) byl ukončen signálem TERM
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-sound main skončil, spouštím znovu
init: Proces indicator-application main (1699) byl ukončen signálem TERM
init: Proces indicator-application main skončil, spouštím znovu
init: Proces indicator-messages main skončil, spouštím znovu
init: indicator-messages se obnovuje příliš rychle, zastavuji
init: Proces indicator-application main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: indicator-application se obnovuje příliš rychle, zastavuji
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: Proces indicator-power main skončil, spouštím znovu
init: indicator-power se obnovuje příliš rychle, zastavuji

[Pavel 'TIGER' Růžička]

Tak hoď tomu wallpaperu chmod 777 a neměl by s ním mít problém. Nicméně, že končí a znovu se spouští ty indikátory, to není to pravé ořechové. A to bude nejspíše hlavní příčinou.

Zkus: CTRL+ALT+F1 --> sudo chown -R paul:paul /home/paul/

[paul2no]

Tak jsem provedl to převzetí svojí domovské složky, a i u obrázků nastavil chmod na 644 - opravdu nechápu kde jsem přišel k tomu, že většina jich měla chmod 600, a je fakt že hledat problém tady mě nějak nenapadlo...

Takže teď se uvidí.

[paul2no]

Tak se to stalo zase. Přikládám aktuální lightdm.log

[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.10.1, UID=0 PID=1945
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf
[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/60-lightdm-gtk-greeter.conf
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf.d/10-xubuntu.conf
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Registered seat module unity
[+0.00s] DEBUG: Registered seat module surfaceflinger
[+0.01s] DEBUG: Adding default seat
[+0.01s] DEBUG: Seat: Starting
[+0.01s] DEBUG: Seat: Creating greeter session
[+0.01s] DEBUG: Seat: Creating display server of type x
[+0.01s] DEBUG: Using VT 7
[+0.01s] DEBUG: Seat: Starting local X display on VT 7
[+0.01s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.01s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.01s] DEBUG: DisplayServer x-0: Launching X Server
[+0.01s] DEBUG: Launching process 1951: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.01s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.01s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.01s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+3.31s] DEBUG: Got signal 10 from process 1951
[+3.31s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+3.31s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+3.31s] DEBUG: Seat: Display server ready, starting session authentication
[+3.31s] DEBUG: Session pid=1962: Started with service 'lightdm-greeter', username 'lightdm'
[+3.38s] DEBUG: Session pid=1962: Authentication complete with return value 0: Success
[+3.38s] DEBUG: Seat: Session authenticated, running command
[+3.38s] DEBUG: Session pid=1962: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter
[+3.40s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+3.40s] DEBUG: Session pid=1962: Logging to /var/log/lightdm/x-0-greeter.log
[+3.46s] DEBUG: Activating VT 7
[+3.46s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c1
[+4.71s] DEBUG: Session pid=1962: Greeter connected version=1.10.1
[+8.98s] DEBUG: Session pid=1962: Greeter start authentication for paul
[+8.98s] DEBUG: Session pid=2161: Started with service 'lightdm', username 'paul'
[+9.13s] DEBUG: Session pid=2161: Got 1 message(s) from PAM
[+9.13s] DEBUG: Session pid=1962: Prompt greeter with 1 message(s)
[+20.03s] DEBUG: Session pid=1962: Continue authentication
[+20.07s] DEBUG: Session pid=2161: Authentication complete with return value 0: Success
[+20.07s] DEBUG: Session pid=1962: Authenticate result for user paul: Success
[+20.07s] DEBUG: Session pid=1962: User paul authorized
[+20.08s] DEBUG: Session pid=1962: Greeter sets language cs
[+20.12s] DEBUG: Session pid=1962: Greeter requests session xubuntu
[+20.12s] DEBUG: Seat: Stopping greeter; display server will be re-used for user session
[+20.12s] DEBUG: Session pid=1962: Sending SIGTERM
[+20.20s] DEBUG: Session pid=1962: Greeter closed communication channel
[+20.20s] DEBUG: Session pid=1962: Exited with return value 0
[+20.20s] DEBUG: Seat: Session stopped
[+20.20s] DEBUG: Seat: Greeter stopped, running session
[+20.20s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+20.20s] DEBUG: Session pid=2161: Running command /usr/sbin/lightdm-session startxfce4
[+20.20s] DEBUG: Creating shared data directory /var/lib/lightdm-data/paul
[+20.20s] DEBUG: Session pid=2161: Logging to .xsession-errors
[+20.22s] DEBUG: Activating VT 7
[+20.22s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c2
[+21.67s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+31.88s] DEBUG: User /org/freedesktop/Accounts/User0 added
[+36.12s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+47.35s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+64.44s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+122.19s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+4318.60s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+4320.93s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+4484.98s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+4818.79s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+7087.36s] DEBUG: Seat: Locking
[+7087.36s] DEBUG: Seat: Creating greeter session
[+7087.36s] DEBUG: Seat: Creating display server of type x
[+7087.36s] DEBUG: Using VT 8
[+7087.36s] DEBUG: Seat: Starting local X display on VT 8
[+7087.36s] DEBUG: DisplayServer x-1: Logging to /var/log/lightdm/x-1.log
[+7087.37s] DEBUG: DisplayServer x-1: Writing X server authority to /var/run/lightdm/root/:1
[+7087.37s] DEBUG: DisplayServer x-1: Launching X Server
[+7087.37s] DEBUG: Launching process 4496: /usr/bin/X -core :1 -seat seat0 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch
[+7087.37s] DEBUG: DisplayServer x-1: Waiting for ready signal from X server :1
[+7091.28s] DEBUG: Got signal 10 from process 4496
[+7091.28s] DEBUG: DisplayServer x-1: Got signal from X server :1
[+7091.28s] DEBUG: DisplayServer x-1: Connecting to XServer :1
[+7091.28s] DEBUG: Seat: Display server ready, starting session authentication
[+7091.28s] DEBUG: Session pid=4501: Started with service 'lightdm-greeter', username 'lightdm'
[+7091.31s] DEBUG: Session pid=4501: Authentication complete with return value 0: Success
[+7091.31s] DEBUG: Seat: Session authenticated, running command
[+7091.31s] DEBUG: Session pid=4501: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/lightdm-gtk-greeter
[+7091.31s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+7091.31s] DEBUG: Session pid=4501: Logging to /var/log/lightdm/x-1-greeter.log
[+7091.32s] DEBUG: Activating VT 8
[+7091.32s] DEBUG: Locking login1 session /org/freedesktop/login1/session/c2
[+7091.33s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c3
[+7091.43s] DEBUG: Session pid=4501: Greeter connected version=1.10.1
[+7091.81s] DEBUG: Session pid=4501: Greeter start authentication for paul
[+7091.81s] DEBUG: Session pid=4587: Started with service 'lightdm', username 'paul'
[+7091.82s] DEBUG: Session pid=4587: Got 1 message(s) from PAM
[+7091.82s] DEBUG: Session pid=4501: Prompt greeter with 1 message(s)
[+7206.28s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+7227.68s] DEBUG: Session pid=4501: Continue authentication
[+7227.71s] DEBUG: Session pid=4587: Authentication complete with return value 0: Success
[+7227.71s] DEBUG: Session pid=4501: Authenticate result for user paul: Success
[+7227.71s] DEBUG: Session pid=4501: User paul authorized
[+7227.71s] DEBUG: Session pid=4501: Greeter sets language cs
[+7227.76s] DEBUG: Session pid=4501: Greeter requests session xubuntu
[+7227.76s] DEBUG: Seat: Returning to existing user session paul
[+7227.76s] DEBUG: Unlocking login1 session /org/freedesktop/login1/session/c2
[+7227.78s] DEBUG: Activating VT 7
[+7229.83s] DEBUG: Seat: Stopping greeter
[+7229.83s] DEBUG: Session pid=4501: Sending SIGTERM
[+7229.83s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c2
[+7229.84s] DEBUG: Session pid=4587: Exited with return value 0
[+7229.84s] DEBUG: Seat: Session stopped
[+7229.89s] DEBUG: Session pid=4501: Greeter closed communication channel
[+7229.95s] DEBUG: Session pid=4501: Exited with return value 0
[+7229.95s] DEBUG: Seat: Session stopped
[+7229.95s] DEBUG: Seat: Stopping display server, no sessions require it
[+7229.95s] DEBUG: Sending signal 15 to process 4496
[+7230.40s] DEBUG: Process 4496 exited with return value 0
[+7230.40s] DEBUG: DisplayServer x-1: X server stopped
[+7230.40s] DEBUG: Releasing VT 8
[+7230.40s] DEBUG: DisplayServer x-1: Removing X server authority /var/run/lightdm/root/:1
[+7230.40s] DEBUG: Seat: Display server stopped
[+7251.50s] DEBUG: User /org/freedesktop/Accounts/User1000 changed

[Pavel 'TIGER' Růžička]

Reinstaluj libgdk-bixbuf2.0 včetně common

[GeorgeWH]

Občas se mi stane, že po nabootování Xubuntu (14.04) se místo přihlašovací obrazovky zobrazí jen černá - ne že je monitor zhasnutý, ale zobrazuje černou plochu (nenaběhne Lightdm?). Jinak vypadá, že všechno funguje, takže řešení je restart přes terminál z tabletu, potom už to naběhne normálně.

tak sa tam prihlas cez ten tablet a pozri ci ti bezi dm, pripadne ho skus restartnut.

~/.xsession-errors

to je log, ked ti nabehla cierna obrazovka, alebo po korektnom nastartovani?

lightdm ma logy vo /var/log/lightdm, tak sa tam skus pozriet...

[ribbon]

Protože mi dotaz přišel inteligentně napsaný a souhlasím i s tvým názorem na ribbon, poradím to nejlepší co můžu. Vybodni se na ubuntu a nainstaluj opensuse. Ubuntu má sice hodně uživatelů, hezčí vhled než ostatní distra, ale pod tím je syrový debian. Opensuse má kromě jiného skvěle řešené závislosti. Než se s tím začneš hrabat někde v terminálu, zkus ho, nebudeš litovat.

[Pavel 'TIGER' Růžička]

# OT

No, že by bylo ubuntu nějak krásné, to bych si netroufl tvrdit. OpenSUSE je dobrá klikací distribuce, vlastně i když selže grafika, tak textový yast je na vynikající úrovni. OneClick apps je taky velmi dobře promyšlené, několika násobně lepší, než u ubuntu. Možná je o něco málo horší ve výkonu, ale pokud člověk má ssd, tak je to nepodstatné. I když nejvíce času trávím u Debianu, tak musím uznat, že openSUSE není vůbec špatná distribuce.

# KONEC OT

[ribbon]

/^OT \ Ne, že by nemohl mít "nadměrné" množství prachu uvnitř pc, ale aby to způsobilo blackscreen, to bych si netroufl tvrdit. Jinak musím uznat, že ubuntu komunita dokázala připoutat spousty lidí k linuxu ale na té bezporuchovosti to příliš znát není. Běžný uživatel ubuntu hledá problémy na internetu ale už problém nenahlásí v bagzile, takže tam výhoda počtu uživatelů končí.\ OT$/

[pavlix]

Osobně mám zjevně na x201 nějaký problém s detekcí zavření víka a zhasíná mi to obrazovku zcela libovolně během práce. Ale ta obrazovka skutečně zhasíná, nikoliv tak jak je to popsáno v dotazu.

[Pavel 'TIGER' Růžička]

Aby ona detekce zavření víka nakonec nebyla v kabelu. To už jsem také viděl.

[pavlix]

Já jsem si dlouho myslel, že mám špatný kontakt přímo u displeje, protože se to dělo víceméně jen při pohybu a tedy že se display odpojuje od napájení nebo tak něco. Že je to detekce jsem vydedukoval z toho, že se mi několikrát probudil notebook v batohu. Nemám nastavené uspávání při zavření víka, ale probouzení při otevření funguje.

[Pavel 'TIGER' Růžička]

To se ti jako probudí zavřenej notebook v batohu? To fakt ale vypadá na hw problém.

[pavlix]

O tom, že je to HW problém, jsem přesvědčený.

[pavlix]

Protože mi dotaz přišel inteligentně napsaný a souhlasím i s tvým názorem na ribbon, dám ti tu nejstupidnější radu, jakou umím.

[h4sy0u]

Tiez radim prejst k poriadnemu dospelemu distru ako napr. oSUSE. Profesionalne distro od instalacie az po konfig. nastroje atd. To naj co je momentalne v linuxovom svete.

[ribbon]

Fedora také není špatná, ale Novell narozdíl od Redhatu poskytuje i nástroje z jeho vlajkové lodě. Navíc má i recovery iso se vším potřebným.

[Pavel 'TIGER' Růžička]

Pár let zpět s fedorou jsem neměl dobré zkušenosti. Každou chvilku se něco rozbilo aíky až extrémně protlačovaným a nevyzkoušením novinkám. Tehdá ji chybělo něco jako LTS. Nevím, jak je na tom dnes. Avšak, co stojí za vyzdvyžení, tak to je Fedorácká příručka. Ta je naprosto geniální. Kdyby to každá distribuce měla tak přehledné a na jednom místě.

[Míra]

Tak toto bych potřeboval taky vyřešit. Dělá mi to totiž úplně to samý. Myslel jsem si, že je problém v mým HW, ale vidím, že asi bude chyba někde v SW.
Mám taky Xubuntu (14.04), ale HW je PC Lenovo Q180 + monitor.
V kontaktech to asi nebude a notebook to není...

[paul2no]

Jak mi radí výše, zkusil jsem přeinstalovat ten libgdk-pixbuf2.0-common, tak uvidíme, jestli to pomůže. Kdyžtak sem zase napíšu, tak to tu sledujte.

[Míra]

Tak jsem to přeinstaloval celý a zatím to funguje!
Snad to nezakřiknu...