Administrace komentářů

sajmon@sajmon-desktop:~$ smartctl --smart=on -d sat /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

sajmon@sajmon-desktop:~$ sudo smartctl -s on -T verypermissive -d sat /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
                  Checking for SMART support by trying SMART ENABLE command.
                  SMART ENABLE appeared to work!  Continuing.

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

sajmon@sajmon-desktop:~$ smartctl -a -T verypermissive -d sat /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Smartctl: Device Read Identity Failed (not an ATA/ATAPI device)

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   1
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jul 28 11:10:13 2007 CEST
SMART is only available in ATA Version 3 Revision 3 or greater.
We will try to proceed in spite of this.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
                  Checking for SMART support by trying SMART ENABLE command.
Error SMART Enable failed: Operation not permitted
                  SMART ENABLE failed - this establishes that this device lacks SMART functionality.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
                  Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Unavailable

SMART Disabled. Use option -s with argument 'on' to enable it.