Dotaz: Winfast DTV 2000 H

[ZeXx86]

Dobrý den, koupil jsem tento digitální TV tuner a chtěl bych ho rozchodit v Gentoo Linuxu 2006 kernel 2.6.17 .. Tady vypíšu pár potřebných informací: # lspci 02:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 02:09.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) 02:09.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)

# lsmod cx88_blackbird 22064 0 cx8802 13188 1 cx88_blackbird firmware_class 11776 2 bttv,cx88_blackbird tuner 58412 0 cx8800 36876 1 cx88_blackbird cx88xx 68132 3 cx88_blackbird,cx8802,cx8800 ir_common 30084 2 bttv,cx88xx i2c_algo_bit 9736 2 bttv,cx88xx video_buf 28036 5 bttv,cx88_blackbird,cx8802,cx8800,cx88xx tveeprom 18192 2 bttv,cx88xx compat_ioctl32 9600 2 bttv,cx8800 v4l2_common 18176 5 bttv,cx88_blackbird,tuner,cx8800,compat_ioctl32 v4l1_compat 13060 1 cx8800 btcx_risc 5896 4 bttv,cx8802,cx8800,cx88xx videodev 12032 4 bttv,cx88_blackbird,cx8800,cx88x

# dir /dev/video* /dev/vbi* /dev/v4l/* /dev/v4l/vbi0 /dev/vbi24 /dev/video12 /dev/video30 /dev/video49 /dev/v4l/video0 /dev/vbi25 /dev/video13 /dev/video31 /dev/video5 /dev/vbi /dev/vbi26 /dev/video14 /dev/video32 /dev/video50 /dev/vbi0 /dev/vbi27 /dev/video15 /dev/video33 /dev/video51 /dev/vbi1 /dev/vbi28 /dev/video16 /dev/video34 /dev/video52 /dev/vbi10 /dev/vbi29 /dev/video17 /dev/video35 /dev/video53 /dev/vbi11 /dev/vbi3 /dev/video18 /dev/video36 /dev/video54 /dev/vbi12 /dev/vbi30 /dev/video19 /dev/video37 /dev/video55 /dev/vbi13 /dev/vbi31 /dev/video2 /dev/video38 /dev/video56 /dev/vbi14 /dev/vbi4 /dev/video20 /dev/video39 /dev/video57 /dev/vbi15 /dev/vbi5 /dev/video21 /dev/video4 /dev/video58 /dev/vbi16 /dev/vbi6 /dev/video22 /dev/video40 /dev/video59 /dev/vbi17 /dev/vbi7 /dev/video23 /dev/video41 /dev/video6 /dev/vbi18 /dev/vbi8 /dev/video24 /dev/video42 /dev/video60 /dev/vbi19 /dev/vbi9 /dev/video25 /dev/video43 /dev/video61 /dev/vbi2 /dev/video /dev/video26 /dev/video44 /dev/video62 /dev/vbi20 /dev/video0 /dev/video27 /dev/video45 /dev/video63 /dev/vbi21 /dev/video1 /dev/video28 /dev/video46 /dev/video7 /dev/vbi22 /dev/video10 /dev/video29 /dev/video47 /dev/video8 /dev/vbi23 /dev/video11 /dev/video3 /dev/video48 /dev/video9 # dir /dev/radio* /dev/radio /dev/radio2 /dev/radio31 /dev/radio43 /dev/radio55 /dev/radio0 /dev/radio20 /dev/radio32 /dev/radio44 /dev/radio56 /dev/radio1 /dev/radio21 /dev/radio33 /dev/radio45 /dev/radio57 /dev/radio10 /dev/radio22 /dev/radio34 /dev/radio46 /dev/radio58 /dev/radio11 /dev/radio23 /dev/radio35 /dev/radio47 /dev/radio59 /dev/radio12 /dev/radio24 /dev/radio36 /dev/radio48 /dev/radio6 /dev/radio13 /dev/radio25 /dev/radio37 /dev/radio49 /dev/radio60 /dev/radio14 /dev/radio26 /dev/radio38 /dev/radio5 /dev/radio61 /dev/radio15 /dev/radio27 /dev/radio39 /dev/radio50 /dev/radio62 /dev/radio16 /dev/radio28 /dev/radio4 /dev/radio51 /dev/radio63 /dev/radio17 /dev/radio29 /dev/radio40 /dev/radio52 /dev/radio7 /dev/radio18 /dev/radio3 /dev/radio41 /dev/radio53 /dev/radio8 /dev/radio19 /dev/radio30 /dev/radio42 /dev/radio54 /dev/radio9

# dmesg Linux video capture interface: v1.00 cx2388x v4l2 driver version 0.0.5 loaded ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 21 sharing vector 0xD9 and IRQ 21 ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21 cx88[0]: Your board isn't known (yet) to the driver. You can cx88[0]: try to pick one of the existing card configs via cx88[0]: card=< n > insmod option. Updating to the latest cx88[0]: version might help as well. cx88[0]: Here is a list of valid choices for the card=< n > insmod option: cx88[0]: card=0 -> UNKNOWN/GENERIC cx88[0]: card=1 -> Hauppauge WinTV 34xxx models cx88[0]: card=2 -> GDI Black Gold cx88[0]: card=3 -> PixelView cx88[0]: card=4 -> ATI TV Wonder Pro cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert cx88[0]: card=6 -> AverTV Studio 303 (M126) cx88[0]: card=7 -> MSI TV-@nywhere Master cx88[0]: card=8 -> Leadtek Winfast DV2000 cx88[0]: card=9 -> Leadtek PVR 2000 cx88[0]: card=10 -> IODATA GV-VCP3/PCI cx88[0]: card=11 -> Prolink PlayTV PVR cx88[0]: card=12 -> ASUS PVR-416 cx88[0]: card=13 -> MSI TV-@nywhere cx88[0]: card=14 -> KWorld/VStream XPert DVB-T cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1 cx88[0]: card=16 -> KWorld LTV883RF cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q cx88[0]: card=18 -> Hauppauge Nova-T DVB-T cx88[0]: card=19 -> Conexant DVB-T reference design cx88[0]: card=20 -> Provideo PV259 cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus cx88[0]: card=22 -> pcHDTV HD3000 HDTV cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) cx88[0]: card=26 -> IODATA GV/BCTV7E cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo) cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550 cx88[0]: card=33 -> Kworld V-Stream Xpert DVD cx88[0]: card=34 -> ATI HDTV Wonder cx88[0]: card=35 -> WinFast DTV1000-T cx88[0]: card=36 -> AVerTV 303 (M126) cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S cx88[0]: card=39 -> KWorld DVB-S 100 cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile) cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702 cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital cx88[0]: card=45 -> KWorld HardwareMpegTV XPert cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid CORE cx88[0]: subsystem: 107d:665e, board: UNKNOWN/GENERIC [card=0,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 21, latency: 32, mmio: 0xeb000000 tuner 2-0061: chip found @ 0xc2 (cx88[0]) tuner 2-0063: chip found @ 0xc6 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 tuner 2-0061: tuner type not set cx2388x blackbird driver version 0.0.5 loaded bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture tuner 2-0061: tuner type not set tuner 2-0061: tuner type not set tuner 2-0061: tuner type not set tuner 2-0061: tuner type not set

.. Slozku /dev/dvb jsem nenasel , stahnul jsem par utilit jako treba tzap, apod .. K dispozici mám mplayer, TVtime, XawTV, kdetv, kradio .. V tvtime i kdetv vidím jak obraz zrní, ale nijak nemůžu spustit scanovani kanalu .. A kdyz spustil kradio tak to napise: 2006-09-29T17:21:44 logging started << ve WARNINGS a 2006-09-29T17:21:44 logging started 2006-09-29T17:21:45 V4LRadio::readV4LCaps: cannot open /dev/radio 2006-09-29T17:21:47 V4LRadio::readV4LCaps: cannot open /dev/radio 2006-09-29T17:21:47 V4LRadio::radio_init: Cannot open radio device /dev/radio << v ERRORS Takze ani radio nehraje .. Jinak aby jsem videl jak obraz zrni v TVtime tak jsem nejprve musel upravit atributy souboru /dev/video0, protzoe psal Permission danied .. Po restartu musím udělat to samé .. Ve windows jsem vse uspesne nainstaloval a tv tuner i radio funguje skvele .. V Linuxu myslim, ze chybi jen maly krucek a pojede to taky ;)

Odpovědi

[ZeXx86]

Jinak myslim ze je treba zmenit typ karty, jak pise dmesg, nejak prez insmod .. Nevim ale jak zkousel jsem insmod cx88 card=35 (protoze myslim ze bude 1000 vicemene kompatibilni ) ale pise to ze nemuze najit soubor

[ZeXx86]

Prosím mohl by mi někdo poradit, alespon jak nastavit typ a kartu tv tuneru .. v /etc/modprobe.conf a modules.conf to nejak nefunguje .. Uz jsem povolil vsechno v kernelu .. A google uz mi taky nic noveho nerekne ..

Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.5 loaded
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 21 sharing vector 0xD9 and IRQ 21
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]: Your board isn't known (yet) to the driver.  You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=< n > insmod option.  Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=< n > insmod option:
cx88[0]:    card=0 -> UNKNOWN/GENERIC
cx88[0]:    card=1 -> Hauppauge WinTV 34xxx models
cx88[0]:    card=2 -> GDI Black Gold
cx88[0]:    card=3 -> PixelView
cx88[0]:    card=4 -> ATI TV Wonder Pro
cx88[0]:    card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]:    card=6 -> AverTV Studio 303 (M126)
cx88[0]:    card=7 -> MSI TV-@nywhere Master
cx88[0]:    card=8 -> Leadtek Winfast DV2000
cx88[0]:    card=9 -> Leadtek PVR 2000
cx88[0]:    card=10 -> IODATA GV-VCP3/PCI
cx88[0]:    card=11 -> Prolink PlayTV PVR
cx88[0]:    card=12 -> ASUS PVR-416
cx88[0]:    card=13 -> MSI TV-@nywhere
cx88[0]:    card=14 -> KWorld/VStream XPert DVB-T
cx88[0]:    card=15 -> DViCO FusionHDTV DVB-T1
cx88[0]:    card=16 -> KWorld LTV883RF
cx88[0]:    card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]:    card=18 -> Hauppauge Nova-T DVB-T
cx88[0]:    card=19 -> Conexant DVB-T reference design
cx88[0]:    card=20 -> Provideo PV259
cx88[0]:    card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]:    card=22 -> pcHDTV HD3000 HDTV
cx88[0]:    card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]:    card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]:    card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]:    card=26 -> IODATA GV/BCTV7E
cx88[0]:    card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]:    card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]:    card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]:    card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]:    card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]:    card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]:    card=33 -> Kworld V-Stream Xpert DVD
cx88[0]:    card=34 -> ATI HDTV Wonder
cx88[0]:    card=35 -> WinFast DTV1000-T
cx88[0]:    card=36 -> AVerTV 303 (M126)
cx88[0]:    card=37 -> Hauppauge Nova-S-Plus DVB-S
cx88[0]:    card=38 -> Hauppauge Nova-SE2 DVB-S
cx88[0]:    card=39 -> KWorld DVB-S 100
cx88[0]:    card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
cx88[0]:    card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
cx88[0]:    card=42 -> digitalnow DNTV Live! DVB-T Pro
cx88[0]:    card=43 -> KWorld/VStream XPert DVB-T with cx22702
cx88[0]:    card=44 -> DViCO FusionHDTV DVB-T Dual Digital
cx88[0]:    card=45 -> KWorld HardwareMpegTV XPert
cx88[0]:    card=46 -> DViCO FusionHDTV DVB-T Hybrid
CORE cx88[0]: subsystem: 107d:665e, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 21, latency: 32, mmio: 0xeb000000
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
tuner 2-0061: tuner type not set
cx2388x alsa driver version 0.0.5 loaded
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx2388x dvb driver version 0.0.5 loaded

[De4mator]

Pro DVB tunery existuje tato stránka a balík v4l-dvb. Aplikace z dvb-apps fungují až po nainstalování v4l-dvb (make, make install). Nejlepší je pak začít s (vyber jedno z měst) scan dvb-t/cz-Praha/Brno/Ostrava > channels.conf. Mělo by to do souboru cannels.conf zapsat dostupné stanice a jejich parametry. Soubor channels.conf se pak využívá třeba pro mplayer. Ten ale musí být zkompilován s podporou DVB. Pro kompilaci je opět třeba balík v4l-dvb.

./configure  --enable-dvb --dvbincdir=cesta do balíku v4l-dvb

Cesta nevede na nejvyšší úroveň, ale někde více uvniř (možná složka include.. nepamatuji si).

[ZeXx86]

Děkuji, po nainstalování balíku v4l-dvb mi linux najde mojí kartu, viz.

Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 21 sharing vector 0xD9 and IRQ 21
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
CORE cx88[0]: subsystem: 107d:665e, board: WinFast DTV2000 H [card=51,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
input: cx88 IR (WinFast DTV2000 H) as /class/input/input2
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 21, latency: 32, mmio: 0xeb000000
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 2-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:09.2[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:02:09.2, rev: 5, irq: 21, latency: 32, mmio: 0xed000000

A treba v tvtime muzu scanovat kanaly, ale pise to porad nosignal, i kdyz prendavam pal/secam/apod, nemuzu tam prepnout na jiny input nez television, predtim tam byly 4x composite .. No ale treba v kdetv vidím i slyším jak mi "šumí" obraz .. A při ladění kanálů vidím jak se obraz mění .. Třeba zčerná, zšedne, podle freqence .. Ale i kdyz vidím náznaky obrazu .. Tak to nic nenaladí .. Ale uz to je úspěch .. Jinak kdyz chci scanovat digitalni kanaly prez program scan, tak to ale napise: scan dvb-t/Ostrava > channels.conf scanning dvb-t/Ostrava using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2250: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory Pochopitelne to nejde, protoze nic jako /dev/dvb/... neexistuje .. Předem díky za vaše reakce

[ZeXx86]

Takže v kdetv i tvtime naladím ct1,ct2,prima,nova,polsat,tvp1 (analog) s pal-dk, pripadne pal-i, kvalita nic moc, ale aspon neco .. Jinak vytvořil jsem složku /dev/dvb/.. a sobory pomocí scriptu: http://www.avermedia.com/docs/pdffiles/linux.txt a dmesg mi vypisuje neco jako

cx88[0]:   cmds: iq rd ptr   : 0x00000105
cx88[0]:   cmds: cdt current : 0x00000448
cx88[0]:   cmds: pci target  : 0x19c6cb80
cx88[0]:   cmds: line / byte : 0x01200000
cx88[0]:   risc0: 0x80008200 [ sync resync count=512 ]
cx88[0]:   risc1: 0x1c000480 [ write sol eol count=1152 ]
cx88[0]:   risc2: 0x184e8480 [ write sol 22 19 18 cnt1 resync count=1152 ]
cx88[0]:   risc3: 0x18000280 [ write sol count=640 ]
cx88[0]:   iq 0: 0x184ea000 [ write sol 22 19 18 cnt1 resync 13 count=0 ]
cx88[0]:   iq 1: 0x19c6c000 [ arg #1 ]
cx88[0]:   iq 2: 0x1c000480 [ write sol eol count=1152 ]
cx88[0]:   iq 3: 0x19c6c700 [ arg #1 ]
cx88[0]:   iq 4: 0x80008200 [ sync resync count=512 ]
cx88[0]:   iq 5: 0x1c000480 [ write sol eol count=1152 ]
cx88[0]:   iq 6: 0x184e8480 [ arg #1 ]
cx88[0]:   iq 7: 0x18000280 [ write sol count=640 ]
cx88[0]:   iq 8: 0x184e8d80 [ arg #1 ]
cx88[0]:   iq 9: 0x14000200 [ write eol count=512 ]
cx88[0]:   iq a: 0x184e9000 [ arg #1 ]
cx88[0]:   iq b: 0x1c000480 [ write sol eol count=1152 ]
cx88[0]:   iq c: 0x184e9680 [ arg #1 ]
cx88[0]:   iq d: 0x18000080 [ write sol count=128 ]
cx88[0]:   iq e: 0x184e9f80 [ arg #1 ]
cx88[0]:   iq f: 0x14000400 [ write eol count=1024 ]
cx88[0]:   iq 10: 0x00180c00 [ arg #1 ]
cx88[0]: fifo: 0x00180c00 -> 0x183400
cx88[0]: ctrl: 0x00180400 -> 0x180460
cx88[0]:   ptr1_reg: 0x00181500
cx88[0]:   ptr2_reg: 0x00180468
cx88[0]:   cnt1_reg: 0x00000000
cx88[0]:   cnt2_reg: 0x00000000
cx88[0]/0: [ffff810026d73600/1] timeout - dma=0x186be000
cx88[0]/0: [ffff810026d73c00/2] timeout - dma=0x187a8000
cx88[0]/0: [ffff810026f57800/3] timeout - dma=0x19876000

Takze ted uz mi jen chybi nejak aktivovat dvb a radio .. Na radio staci uz jen myslim zadat typ, ale dv se musi aktivovat celkove, v kernelu jsem to ale aktivoval, a nevim proc se neprida zarizeni do /dev/dvb/adapterX/... Proste jen /dev/video0 a /dev/vbi0 .. nic vic, a kdyz jsem googlil tak jsem videl v jednom logu jak ma v dmesg vypisoval, ze dvb zarizeni pridava .. Takze neco je spatne :( Pls help

[De4mator]

/dev/dvb/adapterX se ti má vytvořit sám díky balíku v4l-dvb (pomocí udev). Proč se to tak u tebe neděje, bohužel netuším.

[ZeXx86]

Tak po restartu to zase prestalo hrat :( Zase v kdetv nic nenaladim, a podarilo se mi nastavit kanal na FM freqenci a chytam vsechny radia prez kdetv :D fakt haluz :) ale nevim na ktere freqenci vysilaji televize .. je to myslim neco kolem 600Mhz

[Luboš Doležel (Doli)]

Analogové televize vysílají v několika různých pásmech, jedno je tuším někde pod rádii, ostatní jsou vysoko nad.

[ZeXx86]

Nejlepsi je ze kdyz nastavim /dev/video0 do kradia jako vstup, tak nemuzu ladit a jen slysim sum, radio nehraje, ale v kdetv mi zase nejde televize ale radio jde .. kdyz nastavim pal-dk tak mi hrajou klasicke stanice a s pal-gb to prepne na nejake jine :D

[ZeXx86]

Dobrý den .. Pořád se mi nedaří rozchodit ani analog TV .. Mám ale uložené nastavení kanálů v době kdy jsem stanice chytal .. A momentálně vidím jako obraz jen nějakou šedou smíchaninu, anténa a ostatní je OK .. Ve windows funguje vše na 1. Nejhorsi je ze po každem rebootu musím změnit atributy u souboru /dev/video0 a /dev/vbi0 abych mohl zapnout alespoň rádio přez kdetv :( Zajímavé je, že analog tv se mi podařilo zprovoznit ani nevím jak, vůbec nic jsem nenastavoval, a tak stejně mi to zase přestalo fungovat :( Znova přidávám výpis z dmesg:

Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 21 sharing vector 0xD9 and IRQ 21
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
CORE cx88[0]: subsystem: 107d:665e, board: WinFast DTV2000 H [card=51,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
input: cx88 IR (WinFast DTV2000 H) as /class/input/input2
cx88[0]/0: found at 0000:02:09.0, rev: 5, irq: 21, latency: 32, mmio: 0xeb000000
tuner 2-0061: chip found @ 0xc2 (cx88[0])
tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 2-0063: chip found @ 0xc6 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:09.2[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:02:09.2, rev: 5, irq: 21, latency: 32, mmio: 0xed000000

[Tom]

Mam podobne zkusenosti. To, ze to sem tam jede a sem tam ne je zapricineno tim, ze se ve widlich karta prepne na Analog po resetu v Linuxu pak jede analog v pohode. Ovsem po vypnuti kompu se vstup nastavi zase zpet na DVB vstup a tim padem nejde ladit analog :(.

[ZeXx86]

Presne tak .. Tohle jsem nedavno zjistil .. Musim restartovat a az po tom vidim analog obraz ..