SMC Ether Power II 10/100

vlastnosti

• PCI sitova karta
• PCI v 2.1 (tedy pozor na 486kove a jine starsi desky)
• chipset 83C170QF
• rozhrani TP
• rychlost 10/100 Mb/sec

navic u SMC 9432BTX
• rozhrani BNC (!?) (Ano, skutecne je to asi jedina karta 10/100, ktera je v provedeni kombo a navic jede bezproblemove pod Linuxem

  Bus  0, device  18, function  0:
    Ethernet controller: Standard Microsystems Corp [SMC] 83C170QF (rev 6).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.Max Lat=28.
      I/O at 0xe800 [0xe8ff].
      Non-prefetchable 32 bit memory at 0xed000000 [0xed000fff].

dmesg:
kernel: epic100.c:v1.11 1/7/2001 Written by Donald Becker 
kernel:   http://www.scyld.com/network/epic100.html
kernel:   (unofficial 2.4.x kernel port, version 1.1.7, April 17, 2001)
kernel: PCI: Found IRQ 11 for device 00:12.0
kernel: PCI: The same IRQ used for device 00:07.5
kernel: epic100(00:12.0): MII transceiver #3 control 3000 status 7809.
kernel: epic100(00:12.0): Autonegotiation advertising 01e1 link partner 0001.
kernel: eth0: SMSC EPIC/100 83c170 at 0xe800, IRQ 11, 01:23:45:67:89:AB.

lspci -vvv :
00:12.0 Ethernet controller: Standard Microsystems Corp [SMC] 83C170QF (rev 06)
        Subsystem: Standard Microsystems Corp [SMC] EtherPower II 10/100
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 


Poznámka<UL>Odkazy
<LI>uzivatelska prirucka (manual) na strankach <A HREF="http://www.smc.com/smc/drivers/Drivers/9432/9432-UGD.pdf">www.smc.com</a> (76 strankovy manual [.PDF])
<LI>Datasheet na strankach <A HREF="http://www.smc.com/smc/drivers/Drivers/9432/9432-DS.pdf">www.smc.com</a> [.PDF]
</ul>
        </div>

        <h2>Postup zprovoznění pod Linuxem</h2>
        <div>
            Je to PCI karta, nemusime tedy nic nastavovat. Doporucuji ale
prohlednout vypis BIOSu pri startu a sledovat, jestli nema sdilene IRQ s nejakou
problematickou kartou. Nemela by napriklad byt sdilena se SCSI radicem a pod.
Nejlepe s jinou sitovkou, USB radicem popr. se zvukovkou (na tu ale pozor,
nektere zvukovky delaji problemy). Pokud dela tyhle problemy, pomuze laborovat
s umistenim v PCI slotech a pod.
<p class="separator"></p>
  Je zapotrebi mit ovladac karty bud v jadre, nebo v modulu. Jedna se
o modul epic100.o</code>
<p class="separator"></p>
  Pokud mame ovladac v jadre, karta by mela byt nadetekovana. Pokud ho
mame v modulu a mame automaticke zavadeni modulu, pridame radek do
/etc/modules.conf</code> (za predpokladu ze jde o prvni/jedinou sitovou kartu. Pokud ne
zmenime eth0 podle potreby):<PRE>
# sitova karta SMC Ether Power II 10/100
alias eth0 epic100
</pre>

  Nyni jiz staci pouze nakonfigurovat sit. Modul muzeme odzkouset:<PRE>
modprobe -v epic100
</pre>

  Pokud nevypise zadnou chybovou hlasku a kartu nadetekuje spravne, je
vse v poradku a konfigurace je hotova.
        </div>

        <h2>Poznámka</h2>
        <div>
            <UL>Odkazy
<LI>uzivatelska prirucka (manual) na strankach <A HREF="http://www.smc.com/smc/drivers/Drivers/9432/9432-UGD.pdf">www.smc.com</A> (76 strankovy manual [.PDF])
<LI>Datasheet na strankach <A HREF="http://www.smc.com/smc/drivers/Drivers/9432/9432-DS.pdf">www.smc.com</A> [.PDF]
</UL>
        </div>


</div>

    <p class="documentHistory">
        Dokument vytvořil: <a href="/lide/djez">David Jež</a>, 1.6.2001 17:20
        | Zobrazeno: 933×</p>
    </p>

<div style="float:right; clear:right;"><!-- ad position 'fullbanner' -->
<div id='div-gpt-ad-1601725271682-0' style='width: 468px; height: 60px;'>
  <script>
    googletag.cmd.push(function() { googletag.display('div-gpt-ad-1601725271682-0'); });
  </script>
</div>
<center><a href="https://www.czech-server.cz/serverhousing-1u-za-465-kc-mesicne_w40.html"><img src="https://tpc.googlesyndication.com/pimgad/15962604697264215309"></a></center></div>

    <p class="page_tools">
        <a href="/hardware/pridavne-karty/sitove-karty/ethernet-2/smc-2/smc-ether-power-ii-10-100-2?varianta=print" rel="nofollow" class="bez-slovniku">Tiskni</a>
            <span id="bookmarks">
                Sdílej:
                <a href="/sdilej?rid=890&s=link"><img src="/images/link/linkuj.gif" width="16" height="16" alt="Linkuj" title="Linkuj"/></a>
                <a href="/sdilej?rid=890&s=jag"><img src="/images/link/jagg.png" width="16" height="16" alt="Jaggni to" title="Jaggni to"/></a>
                <a href="/sdilej?rid=890&s=sme"><img src="/images/link/vybrali_sme.gif" width="15" height="15" alt="Vybrali.sme.sk" title="Vybrali.sme.sk"/></a>
                <a href="/sdilej?rid=890&s=google"><img src="/images/link/google.gif" width="16" height="16" alt="Google" title="Google"/></a>
                <a href="/sdilej?rid=890&s=del"><img src="/images/link/delicio.gif" width="16" height="16" alt="Del.icio.us" title="Del.icio.us"/></a>
                <a href="/sdilej?rid=890&s=fb"><img src="/images/link/facebook.gif" width="16" height="16" alt="Facebook" title="Facebook"/></a>
            </span>
    </p>

	</div> <!-- st -->

    <div class="s_nadpis linkbox_nadpis">Píšeme jinde</div>
    
    <div class="dl noext">
		<div class="dl_vlevo">ISSN 1214-1267  
			<a href="http://czech-server.cz" title="Czech Server">www.czech-server.cz</a>
        </div>
		<div class="dl_vpravo">
            <a href="/redakce">Redakce</a> |
            <a href="/reklama">Inzerce</a> |
            <a href="/doc/podminky-pouziti">Podmínky použití</a> |
            <a href="/doc/osobni-udaje">Osobní údaje</a>
        </div>
		© 1999-2015 <a href="http://www.nitemedia.cz">Nitemedia s. r. o.</a> Všechna práva vyhrazena.
	</div>

</div> <!-- obal -->

<!-- ad position 'gg-anal' -->
<script type="text/javascript">
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
</script>
<script type="text/javascript">
var pageTracker = _gat._getTracker("UA-3151434-1");
pageTracker._initData();
pageTracker._trackPageview();
</script><!-- ad position 'ad-end' -->
<!-- BBelements one2many code -->
<!-- HowTo: All the ad codes must be above this code! -->
<!-- HowTo: It is good idea to place this code just below the last ad code. -->
<!-- https://go.eu.bbelements.com/bb/bb_one2n.js -->
<script type="text/javascript" charset='utf-8' src="https://go.eu.bbelements.com/bb/bb_one2n.js"></script>

<script type='text/javascript'>/* <![CDATA[ */ 
bmone2n.addPosition('14398.1.4.64','');
bmone2n.addPosition('14398.1.2.64','');
bmone2n.addPosition('14398.1.3.64','');
bmone2n.addPosition('14398.1.5.64','');
bmone2n.addPosition('14398.1.7.64','');
bmone2n.addPosition('14398.1.8.1','');
bmone2n.addPosition('14398.1.1.2','');
bmone2n.addPosition('14398.2.8.1','');
bmone2n.addPosition('14398.2.4.64','');
bmone2n.addPosition('14398.2.2.64','');
bmone2n.addPosition('14398.2.3.64','');
bmone2n.addPosition('14398.2.5.64','');
bmone2n.addPosition('14398.2.7.64','');
bmone2n.addPosition('14398.2.1.2','');
bmone2n.addPosition('14398.2.8.1','');
bmone2n.addPosition('14398.2.14.2','');
bmone2n.addPosition('14398.1.14.2','');
bmone2n.addPosition('14398.1.4.7','');
bmone2n.addPosition('14398.2.4.1','');


bmone2n.getAd('go.eu.bbelements.com','',''+(typeof(bburlparam)=='string'?'&'+bburlparam:''));
/* ]]> */</script>
<div id='bmone2t-14398.1.8.1' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.8.1'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.4.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.4.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.2.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.2.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.3.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.3.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.5.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.5.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.7.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.7.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.1.2' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.1.2'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.8.1' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.8.1'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.4.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.4.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.2.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.2.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.3.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.3.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.5.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.5.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.7.64' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.7.64'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.1.2' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.1.2'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.14.2' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.14.2'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.14.2' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.14.2'); /* ]]> */</script></div>
<div id='bmone2t-14398.1.4.7' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.1.4.7'); /* ]]> */</script></div>
<div id='bmone2t-14398.2.4.1' style='display:none'><script type='text/javascript'>/* <![CDATA[ */ bmone2n.makeAd('14398.2.4.1'); /* ]]> */</script></div>
<script type='text/javascript'>/* <![CDATA[ */ bmone2n.moveAd(); /* ]]> */</script>
</body>
</html>