07ca:0337 AVerMedia A867 DVB-T dongle

Identifikace pod Linuxem

Bus 001 Device 006: ID 07ca:0337 AVerMedia Technologies, Inc. A867 DVB-T dongle

Postup zprovoznění pod Linuxem

Ovladač je značně zastaralý a nelze zkompilovat na jádrech 3.5 a vyšší. Povedlo se mi napsat patch pro zprovoznění na Linux Mint 17 resp. Ubuntu 14.04 s jádrem 3.13. Nezkoušel jsem dálkový ovladač, proto uvádím částečná podpora.

1. Nainstalujte zdrojové a hlavičkové soubory jádra:

   sudo apt-get install linux-source
   sudo apt-get install linux-headers-`uname -r`
   

2. Zdrojové soubory rozbalte

   cd /usr/src
   tar -xjvf linux-source-XYZ

3. Vytvořte symbolický odkaz v /lib/modules/jádro/source na zdrojové soubory jádra

   ln -s /usr/src/linux-source-XYZ /lib/modules/`uname -r`/source

4. Ze stránek výrobce si stáhněte originální ovladač zde a rozbalte do adresáře /usr/local/src/a867_drv_v1.0.29
5. Vytvořte patch soubor a867_v1.0.29.patch a uložte do adresáře a867_drv_v1.0.29

   Aplikujte patch

   patch -p1 -i a867_v1.0.29.patch

6. Kompilace a instalace ovladače

   make
   make install 
   

7. Pokud vše proběhlo jak má, vytvořil se soubor a867.ko, který se zkopíroval do adresáře /lib/modules/j`uname -r`/kernel/drivers/media/usb/dvb-usb
   Po instalaci doporučuji aktualizovat informace o modulech

   depmod -a

Poznámka

a867_v1.0.29.patch

Při kopírování patche z WEBu je problém, že většina řádků je zakončena CRLF znaky. Tento detail, ale způsobí, že patch nejde aplikovat. Dneska jsem ještě objevil mušku - na uložto už jsem novou verzi nedával. Jedná se o Makefile řádek ifneq (,$(wildcard $(KSRC)/drivers/media/dvb/.))^M. Správně je ifNeq.

diff -uprN a867_drv_v1.0.29/af903x-fe.c a867_drv_v1.0.29_new/af903x-fe.c
--- a867_drv_v1.0.29/af903x-fe.c    2012-05-22 15:45:29.000000000 +0200
+++ a867_drv_v1.0.29_new/af903x-fe.c    2014-08-12 19:42:39.973513655 +0200
@@ -6,15 +6,18 @@
 #include <linux/list.h> 
 #include <linux/module.h> 
 
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0)) 
+#include <linux/kthread.h> 
+#endif 
+ 
 #include "af903x.h" 
 #include "dvb_frontend.h" 
 #include "standard.h" 
- 
+#include <linux/dvb/frontend.h> 
 #define A333_FREQ_MIN    44250000 
 #define A333_FREQ_MAX    867250000 
 
 
- 
 static int alwayslock; // default to 0 
 module_param(alwayslock, int, 0644); 
 MODULE_PARM_DESC(alwayslock, "Whether to always report channel as locked (default:no)."); 
@@ -22,7 +25,7 @@ MODULE_PARM_DESC(alwayslock, "Whether to
 
 struct af903xm_state { 
 struct dvb_frontend demod; 
-    fe_bandwidth_t current_bandwidth; 
+    u32 current_bandwidth; 
 uint32_t current_frequency; 
 
 struct completion thread_exit; 
@@ -305,22 +308,28 @@ static int af903x_identify(struct af903x
 return 0; 
 } 
 
-static int af903x_get_frontend(struct dvb_frontend* fe, 
-                struct dvb_frontend_parameters *fep) 
+ 
+static int af903x_get_frontend(struct dvb_frontend* fe) 
 { 
+    struct dtv_frontend_properties *fep = &fe->dtv_property_cache;     
 struct af903xm_state *state = fe->demodulator_priv; 
+    u32 delsys; 
 
 deb_data("- Enter %s Function -\n",__FUNCTION__); 
+ 
+    delsys = fep->delivery_system; 
 memset(fep, 0, sizeof(*fep)); 
+    fep->delivery_system = delsys; 
+ 
 fep->frequency = state->current_frequency; 
 fep->inversion = INVERSION_AUTO; 
-    fep->u.ofdm.bandwidth = state->current_bandwidth; 
+    fep->bandwidth_hz = state->current_bandwidth; 
 return 0; 
 } 
 
-static int af903x_set_frontend(struct dvb_frontend* fe, 
-                struct dvb_frontend_parameters *fep) 
+static int af903x_set_frontend(struct dvb_frontend* fe) 
 { 
+    struct dtv_frontend_properties *fep = &fe->dtv_property_cache; 
 struct af903xm_state *state = fe->demodulator_priv; 
 struct af903x_ofdm_channel ch; 
 u16 bw=0; 
@@ -338,15 +347,15 @@ static int af903x_set_frontend(struct dv
 return -EINVAL; 
 } 
 
-    switch(fep->u.ofdm.bandwidth) { 
-    case BANDWIDTH_8_MHZ: bw=8; break; 
-    case BANDWIDTH_7_MHZ: bw=7; break; 
-    case BANDWIDTH_6_MHZ: bw=6; break; 
+    switch(fep->bandwidth_hz) { 
+    case 8000000: bw=8; break; 
+    case 7000000: bw=7; break; 
+    case 6000000: bw=6; break; 
 
 case 6:  
 case 7: 
 case 8: 
-        bw = fep->u.ofdm.bandwidth; 
+        bw = fep->bandwidth_hz; 
 deb_data("- %s wrong bw value: %d -\n",__FUNCTION__, fep->u.ofdm.bandwidth); 
 break; 
 default: 
@@ -360,7 +369,7 @@ static int af903x_set_frontend(struct dv
 ch.Bw               = bw; 
 deb_data("- %s freq=%d KHz, bw=%d MHz -\n",__FUNCTION__, ch.RF_kHz,  ch.Bw); 
 
-    state->current_bandwidth = fep->u.ofdm.bandwidth; 
+    state->current_bandwidth = fep->bandwidth_hz; 
 state->current_frequency = fep->frequency; 
 
 ret = af903x_tune(fe, &ch); 
@@ -371,6 +380,8 @@ static int af903x_set_frontend(struct dv
 return ret; 
 } 
 
+ 
+ 
 static int af903x_read_status(struct dvb_frontend *fe, fe_status_t *stat) 
 { 
 DWORD dwError; 
@@ -539,9 +550,10 @@ static void af903x_release(struct dvb_fr
 } 
 
 static struct dvb_frontend_ops af903x_ops = { 
+    .delsys = { SYS_DVBT }, 
 .info = { 
 .name = "A867 USB DVB-T", 
-        .type = FE_OFDM, 
+        //.type = FE_OFDM, 
 .frequency_min      = A333_FREQ_MIN, 
 .frequency_max      = A333_FREQ_MAX, 
 .frequency_stepsize = 62500, 
@@ -590,7 +602,7 @@ struct dvb_frontend * af903x_attach(u8 t
 
 return demod; 
 } 
- 
+//EXPORT_SYMBOL(af903x_attach); 
 
 static Dword Monitor_GPIO8(void) 
 { 
@@ -688,7 +700,10 @@ static int af903x_monitor_thread_func(vo
 sigfillset(&current->blocked); 
 sprintf(current->comm, "%s", thread_name); 
 #else 
+ 
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0)) 
 daemonize("%s", thread_name); 
+#endif 
 allow_signal(SIGTERM); 
 #endif 
 siginitsetinv(&current->blocked, sigmask(SIGKILL)|sigmask(SIGINT)|\ 
@@ -769,7 +784,11 @@ void af903x_start_monitor_thread(struct
 if( atomic_add_unless(&st->thread_created, 1, 1) ) { 
 st->thread_should_stop = 0; 
 init_completion(&st->thread_exit);  
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0)) 
 kernel_thread(af903x_monitor_thread_func, st, 0); 
+#else 
+                kthread_run(af903x_monitor_thread_func, st, "af903x_monitor"); 
+#endif 
 } 
 #endif //USE_MONITOR_TH 
 
diff -uprN a867_drv_v1.0.29/af903x-tuner.c a867_drv_v1.0.29_new/af903x-tuner.c
--- a867_drv_v1.0.29/af903x-tuner.c    2010-11-10 04:46:22.000000000 +0100
+++ a867_drv_v1.0.29_new/af903x-tuner.c    2014-08-12 19:42:39.973513655 +0200
@@ -9,13 +9,15 @@
 #define IF2  36150       // IF2 frequency = 36.150 MHz 
 #define FREF 16000       // Quartz oscillator 16 MHz 
 
-static int tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) 
+static int tuner_set_params(struct dvb_frontend *fe) 
 { 
+    struct dtv_frontend_properties *params = &fe->dtv_property_cache; 
 struct tuner_priv *priv=NULL; 
 DWORD dwError = Error_NO_ERROR; 
 DWORD freq = params->frequency ;// 1000; // Hz -> kHz 
 
-    priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; 
+    priv->bandwidth = (params->delivery_system == SYS_DVBT) ? params->bandwidth_hz : 0; 
+    //priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->bandwidth_hz : 0; 
 
 deb_data("%s - freq : %d , bandwidth : %dn",__FUNCTION__, freq,priv->bandwidth); 
 
@@ -24,6 +26,8 @@ static int tuner_set_params(struct dvb_f
 
 return 0; 
 } 
+ 
+ 
 static int tuner_get_frequency(struct dvb_frontend *fe, u32 *frequency) 
 { 
 struct tuner_priv *priv = fe->tuner_priv; 
@@ -70,6 +74,7 @@ static const struct dvb_tuner_ops tuner_
 .sleep         = tuner_sleep, 
 
 .set_params    = tuner_set_params, 
+ 
 .get_frequency = tuner_get_frequency, 
 .get_bandwidth = tuner_get_bandwidth 
 }; 
diff -uprN a867_drv_v1.0.29/Makefile a867_drv_v1.0.29_new/Makefile
--- a867_drv_v1.0.29/Makefile    2010-11-10 04:46:22.000000000 +0100
+++ a867_drv_v1.0.29_new/Makefile    2014-08-12 19:43:32.077515006 +0200
@@ -1,7 +1,6 @@
 
 EXTRA_CFLAGS = -DEXPORT_SYMTAB 
 
-BUILD_DEP = dvb-usb/dvb-usb-common.h dvb-usb/dvb-usb.h dvb-usb/dvb-usb-ids.h dvb-core/dvb_frontend.h dvb-core/dvbdev.h dvb-core/dmxdev.h dvb-core/dvb_demux.h dvb-core/dvb_net.h dvb-core/demux.h dvb-core/dvb_ringbuffer.h frontends/dvb-pll.h 
 
 ifneq ($(KOBJ),) 
 version := $(shell egrep -e '^VERSION ' $(KSRC)/Makefile | awk 'BEGIN{FS="="}{print $$2}' | tr -d ' ') 
@@ -29,9 +28,24 @@ INSTALL := $(shell which install)
 DEPMOD  := $(shell which depmod || which /sbin/depmod || echo "true You should now run depmod") 
 
 # SYSTEM DVB setting 
+ifneq (,$(wildcard $(KSRC)/drivers/media/dvb/.)) 
+BUILD_DEP = dvb/dvb-usb/dvb-usb-common.h dvb/dvb-usb/dvb-usb.h dvb/dvb-usb/dvb-usb-ids.h dvb/dvb-core/dvb_frontend.h dvb/dvb-core/dvbdev.h dvb/dvb-core/dmxdev.h dvb/dvb-core/dvb_demux.h dvb/dvb-core/dvb_net.h dvb/dvb-core/demux.h dvb/dvb-core/dvb_ringbuffer.h dvb/frontends/dvb-pll.h 
+ 
+MISSINGFILE := $(shell for i in $(BUILD_DEP); do if [ ! -f $(KSRC)/drivers/media/$$i ]; then echo $$i; fi; done) 
+ 
 DVB_FLAGS += -I$(KSRC)/drivers/media/dvb/dvb-core/ 
 DVB_FLAGS += -I$(KSRC)/drivers/media/dvb/dvb-usb/ 
 DVB_FLAGS += -I$(KSRC)/drivers/media/dvb/frontends/ 
+else 
+BUILD_DEP = usb/dvb-usb/dvb-usb-common.h usb/dvb-usb/dvb-usb.h dvb-core/dvb-usb-ids.h dvb-core/dvb_frontend.h dvb-core/dvbdev.h dvb-core/dmxdev.h dvb-core/dvb_demux.h dvb-core/dvb_net.h dvb-core/demux.h dvb-core/dvb_ringbuffer.h dvb-frontends/dvb-pll.h 
+ 
+MISSINGFILE := $(shell for i in $(BUILD_DEP); do if [ ! -f $(KSRC)/drivers/media/$$i ]; then echo $$i; fi; done) 
+ 
+DVB_FLAGS += -I$(KSRC)/drivers/media/dvb-core/ 
+DVB_FLAGS += -I$(KSRC)/drivers/media/usb/dvb-usb/ 
+DVB_FLAGS += -I$(KSRC)/drivers/media/dvb-frontends/ 
+endif 
+ 
 EXTRA_CFLAGS += $(DVB_FLAGS) 
 
 EXTRA_CFLAGS += -Wno-unused-value -Wno-unused-variable -Wno-unused-parameter \ 
@@ -41,20 +55,23 @@ a867-objs := af903x-core.o af903x-device
 demodulator.o demodulatorextend.o usb2impl.o user.o mxl5007t.o Maxlinear_MXL5007.o Afa_AF9007.o 
 obj-m += a867.o 
 
-MISSINGFILE := $(shell for i in $(BUILD_DEP); do if [ ! -f $(KSRC)/drivers/media/dvb/$$i ]; then echo $$i; fi; done) 
 
 ifeq ($(MISSINGFILE),) 
 default: 
 make -C $(KSRC) O=$(KOBJ) SUBDIRS=`pwd` modules 
 else 
 default: 
-    @echo Missing files that required to build driver: $(KSRC)/drivers/media/dvb/$(MISSINGFILE) 
-    @echo Try to get kernel source closest to $(CURRENT) from www.kernel.org and then copy to $(KSRC)/drivers/media/dvb  
+    @echo Missing files that required to build driver: $(KSRC)/drivers/media/$(MISSINGFILE) 
+    @echo Try to get kernel source closest to $(CURRENT) from www.kernel.org and then copy to $(KSRC)/drivers/media  
 endif 
 
 install: 
-    @install -d $(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/dvb/a867 
-    $(INSTALL) -c -D -m 644 -c a867.ko $(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/dvb/a867/ 
+    if [ -d "$(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/dvb" ];then  \ 
+             install -d $(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/dvb/a867; \ 
+             install -c -D -m 644 -c a867.ko $(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/dvb/a867/;    \ 
+        else \ 
+               install -c -D -m 644 -c a867.ko $(DESTDIR)/lib/modules/$(CURRENT)/kernel/drivers/media/usb/dvb-usb/;   \ 
+        fi  
 /sbin/depmod -a 
 
 remove:

Dokument vytvořil: Skokan, 11.8.2014 21:26 | Poslední úprava: Skokan, 12.8.2014 20:20 | Historie změn | Zobrazeno: 1591×