M2436N

Ovladač:

v jádře

Technické parametry

90nm - Pentium M 1.6 GHz, 2MB L2 cache, 256 MB RAM, 40 GB HDD, Wifi, 2.2 kg, combo CDRW/DVD, 14 palcový NB se šasi ze slitiny hliníku a manganu. Solidní výdrž - u mě v praxi až 5 hodin.

Identifikace pod Linuxem

dmesg:

Linux version 2.6.10-gentoo-r6 (root@notas) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #10 Tue Feb 15 15:08:29 UTC 2005 ACPI: RSDP (v000 ACPIAM ) @ 0x000f4f70 ACPI: RSDT (v001 A M I OEMRSDT 0x04000407 MSFT 0x00000097) @ 0x0f740000 ACPI: FADT (v002 A M I OEMFACP 0x04000407 MSFT 0x00000097) @ 0x0f740200 ACPI: MADT (v001 A M I OEMAPIC 0x04000407 MSFT 0x00000097) @ 0x0f740300 ACPI: OEMB (v001 A M I OEMBIOS 0x04000407 MSFT 0x00000097) @ 0x0f750040 ACPI: DSDT (v001 0ABBD 0ABBD001 0x00000001 MSFT 0x02000001) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information

Detected 1600.476 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25

Memory: 245164k/253184k available (2728k kernel code, 7376k reserved, 1068k data, 236k init, 0k highmem)

Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152) Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K

CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06

Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub

Linux agpgart interface v0.100 (c) Dave Jones ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FN00] (off) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: Processor [CPU1] (supports C1 C2 C3) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (37 C)

isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found i8042.c: Detected active multiplexing controller, rev 1.1.

mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4

PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xfebff800 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0xd480 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0xd800 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0xd880 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... <6>kjournald starting. Commit interval 5 seconds failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 236k freed Adding 514072k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda1, internal journal ieee80211_crypt: registered algorithm 'NULL' ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ieee80211_crypt: registered algorithm 'WEP' 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16 eth1: RealTek RTL8139 at 0xc800, 00:11:d8:56:19:6b, IRQ 16 eth1: Identified 8139 chip type 'RTL-8101' agpgart: Detected an Intel 855 Chipset. agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.1.0 20040405 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device [drm] Initialized i915 1.1.0 20040405 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2) Asus Laptop ACPI Extras version 0.29 M2NE model detected, supported ieee80211_crypt: registered algorithm 'TKIP' eth1: link down Real Time Clock Driver v1.12 PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 53667 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.6 to 64 mtrr: base(0xf0020000) is not aligned on a size(0x180000) boundary usb 2-2: USB disconnect, address 2 usb 2-2: new full speed USB device using uhci_hcd and address 3 drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0

lspci: 0000:00:00.0 Host bridge: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 0000:00:00.3 System peripheral: Intel Corp. 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) 0000:01:03.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a9) 0000:01:03.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 01) 0000:01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:05.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)

Postup zprovoznění pod Linuxem

Akcelerace grafiky:

jaderný modul i915 +

v /etc/X11/xorg.conf Section "Device" .... Driver "i810" ..... EndSection

Wifi: http://ipw2200.sourceforge.net #emerge net-wireless/ipw2200

ACPI modul: asus_acpi

Poznámka

Na czechcomputer.cz lze koupit bez OS na rozdíl od jiných obchodů kde tvrdili že to Asus tak neprodává.

Zatím se mi povedlo v Gentoo zprovoznit: - akcelerace grafiky - vypalovačka - zvuk - wifi - síťová karta - speedfreq/cpufreq (řízení frekvence CPU podle zátěže) 600 - 1600 MHz, škrcení procesoru...

Nefunguje (zatím) - integrovaným modemem sem se nezabýval - uspávání sem zatím příliš neřešil (nefunguje)

více info na :

http://people.easter-eggs.org/~valos/Asus_M2400N/Asus_M2400N.html

Dokument vytvořil: Ondroid, 22.2.2005 10:53 | Zobrazeno: 756×