abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×
dnes 13:22 | Zajímavý článek

Na stránkách spolku OpenAlt vyšel Rozhovor s Jaroslavem Tulachem o GraalVM – o kompilátoru umožňujícím v jednom programu kombinovat různé jazyky (Java, JavaScript, Ruby, R, C, C++, Fortran, Rust aj.), překládat do nativních binárek nebo si snadno vytvořit vlastní jazyk a použít při tom stávající ekosystém (debugger, profiler, IDE atd.).

xkucf03 | Komentářů: 0
dnes 11:55 | Komunita

Bylo spuštěno předobjednávání linuxových chytrých telefonů PINEPHONE v limitované edici BraveHeart. Cena telefonu je 149 dolarů. Cena dopravy do Česka je 15 dolarů. Telefony by mely být odesílány na přelomu prosince a ledna.

Ladislav Hagara | Komentářů: 9
dnes 02:22 | Pozvánky

Fedora 31 Release Party, tj. oslava nedávného vydání Fedory 31, se uskuteční ve středu 20. listopadu v Brně. Program přednášek bude upřesněn.

Ladislav Hagara | Komentářů: 1
dnes 01:11 | Nová verze

Příspěvek na blogu webové aplikace pro spolupráci na zdrojových kódech pomocí gitu Gitea (Wikipedie) představuje novinky a ukazuje náhledy nové major verze 1.10.0 této v programovacím jazyce Go naprogramované aplikace. Nově jsou například vedle sebe zobrazovány původní a nové verze obrázků.

Ladislav Hagara | Komentářů: 0
včera 22:33 | IT novinky

Společnost Docker stojící za stejnojmennou kontejnerovou technologií čelila vážným finančním problémům. Stávající investoři do ní ale vložili dalších 35 milionů dolarů a společnost Mirantis odkoupila Docker Enterprise.

Ladislav Hagara | Komentářů: 0
včera 16:11 | IT novinky

Od 24. listopadu bude možné předobjednat přenosný počítač Pocket Popcorn Computer (Pocket P.C.) s 1.2 GHz Quad-Core ARM Cortex-A53 CPU, 2GB DDR3 RAM, 32GB eMMC Memory, 4.95" Full HD IPS LCD a 3200 mAh Removable Battery. Počítač by měl být odesílán v květnu 2020. Předinstalován by měl být Debian 10.

Ladislav Hagara | Komentářů: 78
včera 11:11 | Komunita

Canonical věnoval nadaci UBports další telefony a tablety pro podporu vývoje Ubuntu Touch, tj. Ubuntu pro telefony a tablety. Vybraní vývojáři Ubuntu Touch je mohou získat zdarma.

Ladislav Hagara | Komentářů: 13
včera 09:33 | Zajímavý projekt

Společnost GitHub v rámci svého GitHub Archive Programu vytvoří několik off-line záloh open source softwaru nacházejícího se na GitHubu pro budoucí generace. První taková záloha všech aktivních repozitářů proběhne 2. února 2020 ve spolupráci se společností Pigl na jejich piqlFilmy a uložena bude v Arktickém světovém archivu. Případné obnovení ze zálohy by mělo být možné i za 1 000 let.

Ladislav Hagara | Komentářů: 7
včera 05:55 | Nová verze

Dnes a zítra probíhá v Praze konference Internet a Technologie 19 pořádaná sdružením CZ.NIC. Sledovat ji lze online.

Ladislav Hagara | Komentářů: 1
13.11. 19:44 | Nová verze

Brendan Eich, mj. autor JavaScriptu a několikadenní CEO Mozilly, představil v lednu 2016 webový prohlížeč Brave (Wikipedie, GitHub). Dnes byla vydána verze 1.0 tohoto webového prohlížeče. K dispozici jsou také balíčky pro Linux.

Ladislav Hagara | Komentářů: 11
Jaké hodinky nosíte (nejčastěji)?
 (25%)
 (7%)
 (14%)
 (54%)
Celkem 169 hlasů
 Komentářů: 11, poslední dnes 11:52
Rozcestník
Nástroje

www.AutoDoc.Cz

Probook 4340s

Technické parametry

HP Probook 4340s, 13,3" 1366x768, intel core i5-3210M (ivy bridge), 4GB ram (aktuálně 1x8GB modul), 500 GB HDD Hitachi 5400ot/min, Wifi + Bluetooth Ralink RT3290, Ethernet Realtek, 3xUSB3.0 1xUSB2.0, DVD-RW, 51Wh baterie výdrž 5-6h

Identifikace pod Linuxem

lshw:

H/W path         Device      Class          Description
=======================================================
                             system         HP ProBook 4340s (C4Y25EA#BCM)
/0                           bus            17F0
/0/0                         memory         64KiB BIOS
/0/13                        processor      Intel(R) Core(TM) i5-3210M CPU @ 2.5
/0/13/15                     memory         32KiB L1 cache
/0/13/16                     memory         256KiB L2 cache
/0/13/17                     memory         3MiB L3 cache
/0/14                        memory         32KiB L1 cache
/0/18                        memory         8GiB System Memory
/0/18/0                      memory         DIMMProject-Id-Version: lshwReport-M
/0/18/1                      memory         8GiB SODIMM DDR3 Synchronous 1600 MH
/0/100                       bridge         3rd Gen Core processor DRAM Controll
/0/100/2                     display        3rd Gen Core processor Graphics Cont
/0/100/1a                    bus            7 Series/C210 Series Chipset Family 
/0/100/1b                    multimedia     7 Series/C210 Series Chipset Family 
/0/100/1c                    bridge         7 Series/C210 Series Chipset Family 
/0/100/1c.2                  bridge         7 Series/C210 Series Chipset Family 
/0/100/1c.2/0                generic        SD/MMC Host Controller
/0/100/1c.2/0.2              generic        Standard SD Host Controller
/0/100/1c.2/0.3              generic        MS Host Controller
/0/100/1c.3                  bridge         7 Series/C210 Series Chipset Family 
/0/100/1c.3/0    wlan0       network        RT3290 Wireless 802.11n 1T/1R PCIe
/0/100/1c.3/0.1              generic        RT3290 Bluetooth
/0/100/1c.5                  bridge         7 Series/C210 Series Chipset Family 
/0/100/1c.5/0    eth0        network        RTL8111/8168 PCI Express Gigabit Eth
/0/100/1d                    bus            7 Series/C210 Series Chipset Family 
/0/100/1f                    bridge         HM76 Express Chipset LPC Controller
/0/100/1f.2                  storage        7 Series Chipset Family 6-port SATA 
/0/100/14                    bus            7 Series/C210 Series Chipset Family 
/0/100/16                    communication  7 Series/C210 Series Chipset Family 
/0/1             scsi0       storage        
/0/1/0.0.0       /dev/sda    disk           500GB Hitachi HTS54505
/0/2             scsi1       storage        
/0/2/0.0.0       /dev/cdrom  disk           CDDVDW SN-208BB
/1                           power          RC06051

lspci:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
02:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
02:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
02:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30)
03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 07)

lsmod:

Module                  Size  Used by
parport_pc             28152  0 
ppdev                  17073  0 
rfcomm                 42641  0 
bnep                   18036  2 
bluetooth             228619  10 bnep,rfcomm
nls_iso8859_1          12713  1 
snd_hda_codec_hdmi     36913  1 
snd_hda_codec_idt      70256  1 
joydev                 17377  0 
snd_hda_intel          39619  3 
snd_hda_codec         136453  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm                97451  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0 
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30180  1 snd_seq_midi
coretemp               13355  0 
kvm_intel             132891  0 
uvcvideo               80847  0 
kvm                   443165  1 kvm_intel
videobuf2_vmalloc      13056  1 uvcvideo
videobuf2_memops       13202  1 videobuf2_vmalloc
arc4                   12615  2 
videobuf2_core         40513  1 uvcvideo
videodev              129260  2 uvcvideo,videobuf2_core
ghash_clmulni_intel    13259  0 
aesni_intel            55399  3 
aes_x86_64             17255  1 aesni_intel
xts                    12885  1 aesni_intel
lrw                    13257  1 aesni_intel
gf128mul               14951  2 lrw,xts
ablk_helper            13597  1 aesni_intel
cryptd                 20373  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_seq                61554  2 snd_seq_midi_event,snd_seq_midi
rt2800pci              18582  0 
rt2800lib              66507  1 rt2800pci
rt2x00pci              14519  1 rt2800pci
hp_wmi                 18048  0 
rt2x00lib              54869  3 rt2x00pci,rt2800lib,rt2800pci
sparse_keymap          13890  1 hp_wmi
mac80211              606457  3 rt2x00lib,rt2x00pci,rt2800lib
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
hp_accel               26012  0 
snd_timer              29425  2 snd_pcm,snd_seq
lis3lv02d              20111  1 hp_accel
cfg80211              510937  2 mac80211,rt2x00lib
input_polldev          13896  1 lis3lv02d
i915                  600351  3 
wmi                    19070  1 hp_wmi
mac_hid                13205  0 
video                  19390  1 i915
drm_kms_helper         49394  1 i915
psmouse                95870  0 
snd                    68876  16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device
drm                   286313  4 i915,drm_kms_helper
lpc_ich                17061  0 
jmb38x_ms              17416  0 
i2c_algo_bit           13413  1 i915
eeprom_93cx6           13344  1 rt2800pci
mei                    41158  0 
crc_ccitt              12707  1 rt2800lib
soundcore              12680  1 snd
microcode              22881  0 
memstick               16554  1 jmb38x_ms
lp                     17759  0 
parport                46345  3 lp,ppdev,parport_pc
serio_raw              13215  0 
ahci                   25731  2 
libahci                31364  1 ahci
r8169                  67446  0 
sdhci_pci              18590  0 
sdhci                  32522  1 sdhci_pci

dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=2e5e5d82-de83-40e1-a7a6-ba49d0179bbe ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b891cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b891d000-0x00000000b9d3dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9d3e000-0x00000000b9ebdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9ebe000-0x00000000b9fbdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9fbe000-0x00000000b9ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffec0000-0x00000000ffedefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0xb9ffe000  ACPI 2.0=0xb9ffe014  SMBIOS=0xb93ed598 
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[    0.000000] efi: mem01: type=4, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009d000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001445000) (19MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001445000-0x0000000002000000) (11MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000003345000) (19MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000003345000-0x0000000036120000) (813MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000036120000-0x0000000037088000) (15MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037088000-0x0000000080f46000) (1182MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000080f46000-0x00000000ad01e000) (704MB)
[    0.000000] efi: mem11: type=4, attr=0xf, range=[0x00000000ad01e000-0x00000000ad03e000) (0MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000ad03e000-0x00000000ae951000) (25MB)
[    0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000ae951000-0x00000000b000e000) (22MB)
[    0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000b000e000-0x00000000b1069000) (16MB)
[    0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000b1069000-0x00000000b1a6c000) (10MB)
[    0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000b1a6c000-0x00000000b1dc8000) (3MB)
[    0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000b1dc8000-0x00000000b1dc9000) (0MB)
[    0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000b1dc9000-0x00000000b1dcb000) (0MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000b1dcb000-0x00000000b4aa6000) (44MB)
[    0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000b4aa6000-0x00000000b4da7000) (3MB)
[    0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000b4da7000-0x00000000b4eba000) (1MB)
[    0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000b4eba000-0x00000000b4ebf000) (0MB)
[    0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000b4ebf000-0x00000000b5fe1000) (17MB)
[    0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000b5fe1000-0x00000000b5fea000) (0MB)
[    0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000b5fea000-0x00000000b5ff0000) (0MB)
[    0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000b5ff0000-0x00000000b5ff2000) (0MB)
[    0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000b5ff2000-0x00000000b5ff6000) (0MB)
[    0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000b5ff6000-0x00000000b5ff7000) (0MB)
[    0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000b5ff7000-0x00000000b611e000) (1MB)
[    0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000b611e000-0x00000000b6120000) (0MB)
[    0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000b6120000-0x00000000b7f1d000) (29MB)
[    0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000b7f1d000-0x00000000b8226000) (3MB)
[    0.000000] efi: mem33: type=3, attr=0xf, range=[0x00000000b8226000-0x00000000b891d000) (6MB)
[    0.000000] efi: mem34: type=5, attr=0x800000000000000f, range=[0x00000000b891d000-0x00000000b8ab0000) (1MB)
[    0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000b8ab0000-0x00000000b9124000) (6MB)
[    0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000b9124000-0x00000000b9252000) (1MB)
[    0.000000] efi: mem37: type=6, attr=0x800000000000000f, range=[0x00000000b9252000-0x00000000b953e000) (2MB)
[    0.000000] efi: mem38: type=0, attr=0xf, range=[0x00000000b953e000-0x00000000b9c08000) (6MB)
[    0.000000] efi: mem39: type=0, attr=0xf, range=[0x00000000b9c08000-0x00000000b9d3e000) (1MB)
[    0.000000] efi: mem40: type=7, attr=0xf, range=[0x00000000b9d3e000-0x00000000b9e96000) (1MB)
[    0.000000] efi: mem41: type=2, attr=0xf, range=[0x00000000b9e96000-0x00000000b9ea0000) (0MB)
[    0.000000] efi: mem42: type=1, attr=0xf, range=[0x00000000b9ea0000-0x00000000b9ebe000) (0MB)
[    0.000000] efi: mem43: type=10, attr=0xf, range=[0x00000000b9ebe000-0x00000000b9fb0000) (0MB)
[    0.000000] efi: mem44: type=10, attr=0xf, range=[0x00000000b9fb0000-0x00000000b9fbe000) (0MB)
[    0.000000] efi: mem45: type=9, attr=0xf, range=[0x00000000b9fbe000-0x00000000b9fcb000) (0MB)
[    0.000000] efi: mem46: type=9, attr=0xf, range=[0x00000000b9fcb000-0x00000000b9fff000) (0MB)
[    0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000b9fff000-0x00000000ba000000) (0MB)
[    0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000100000000-0x000000023fe00000) (5118MB)
[    0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[    0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem51: type=11, attr=0x8000000000000000, range=[0x00000000ffec0000-0x00000000ffedf000) (0MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 4340s/17F0, BIOS 68IRR Ver. F.40 01/29/2013
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xb9ffffff]
[    0.000000]  [mem 0x00000000-0xb9ffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xb9ffffff @ [mem 0x1fffc000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x23fdfffff]
[    0.000000]  [mem 0x100000000-0x23fdfffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x23fdfffff @ [mem 0xb9eb8000-0xb9ebdfff]
[    0.000000] RAMDISK: [mem 0x36120000-0x37087fff]
[    0.000000] ACPI: RSDP 00000000b9ffe014 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000b9ffe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 00000000b9ffc000 0010C (v05 HPQOEM 17F0     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 00000000b9fd5000 2132D (v02 HPQOEM 17F0     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 00000000b9d33000 00040
[    0.000000] ACPI: HPET 00000000b9ffb000 00038 (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: APIC 00000000b9ffa000 000BC (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 00000000b9ff9000 0003C (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 00000000b9ff8000 000A5 (v32 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000b9fd2000 002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 00000000b9fd1000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 00000000b9fd0000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: MSDM 00000000b9fcf000 00055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
[    0.000000] ACPI: FPDT 00000000b9fce000 00044 (v01 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 00000000b9fcd000 00038 (v00 HPQOEM 17F0     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000b9fcc000 00974 (v01  PmRef  Cpu0Ist 00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 00000000b9fcb000 00AAD (v01  PmRef    CpuPm 00003000 INTL 20110112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fdfffff]
[    0.000000]   NODE_DATA [mem 0x23fdfb000-0x23fdfffff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0xb891cfff]
[    0.000000]   node   0: [mem 0xb9d3e000-0xb9ebdfff]
[    0.000000]   node   0: [mem 0xb9fff000-0xb9ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x23fdfffff]
[    0.000000] On node 0 totalpages: 2066475
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 8 pages reserved
[    0.000000]   DMA zone: 3909 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11755 pages used for memmap
[    0.000000]   DMA32 zone: 740531 pages, LIFO batch:31
[    0.000000]   Normal zone: 20472 pages used for memmap
[    0.000000]   Normal zone: 1289736 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000b891d000 - 00000000b9d3e000
[    0.000000] PM: Registered nosave memory: 00000000b9ebe000 - 00000000b9fbe000
[    0.000000] PM: Registered nosave memory: 00000000b9fbe000 - 00000000b9fff000
[    0.000000] PM: Registered nosave memory: 00000000ba000000 - 00000000e00f8000
[    0.000000] PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000
[    0.000000] PM: Registered nosave memory: 00000000e00f9000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffec0000
[    0.000000] PM: Registered nosave memory: 00000000ffec0000 - 00000000ffedf000
[    0.000000] PM: Registered nosave memory: 00000000ffedf000 - 0000000100000000
[    0.000000] e820: [mem 0xba000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s85056 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034176
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=2e5e5d82-de83-40e1-a7a6-ba49d0179bbe ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7898940k/9435136k available (7006k kernel code, 1169236k absent, 366960k reserved, 6238k data, 992k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2494.365 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.73 BogoMIPS (lpj=9977460)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.006051] Security Framework initialized
[    0.006060] AppArmor: AppArmor initialized
[    0.006061] Yama: becoming mindful.
[    0.006537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008525] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009425] Mount-cache hash table entries: 256
[    0.009577] Initializing cgroup subsys cpuacct
[    0.009579] Initializing cgroup subsys memory
[    0.009584] Initializing cgroup subsys devices
[    0.009585] Initializing cgroup subsys freezer
[    0.009587] Initializing cgroup subsys blkio
[    0.009588] Initializing cgroup subsys perf_event
[    0.009590] Initializing cgroup subsys hugetlb
[    0.009611] CPU: Physical Processor ID: 0
[    0.009612] CPU: Processor Core ID: 0
[    0.009616] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009616] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009971] mce: CPU supports 7 MCE banks
[    0.009982] CPU0: Thermal monitoring enabled (TM1)
[    0.009987] process: using mwait in idle threads
[    0.009991] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.009991] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.009991] tlb_flushall_shift: 1
[    0.010143] Freeing SMP alternatives: 24k freed
[    0.012165] ACPI: Core revision 20121018
[    0.074609] ftrace: allocating 26690 entries in 105 pages
[    0.087512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.127146] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
[    0.127154] TSC deadline timer enabled
[    0.127158] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.127164] ... version:                3
[    0.127165] ... bit width:              48
[    0.127166] ... generic registers:      4
[    0.127167] ... value mask:             0000ffffffffffff
[    0.127168] ... max period:             000000007fffffff
[    0.127169] ... fixed-purpose events:   3
[    0.127169] ... event mask:             000000070000000f
[    0.141663] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.128079] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.168752] Brought up 4 CPUs
[    0.168755] smpboot: Total of 4 processors activated (19954.92 BogoMIPS)
[    0.171936] devtmpfs: initialized
[    0.172815] EVM: security.selinux
[    0.172817] EVM: security.SMACK64
[    0.172817] EVM: security.capability
[    0.172855] PM: Registering ACPI NVS region [mem 0xb9ebe000-0xb9fbdfff] (1048576 bytes)
[    0.173496] regulator-dummy: no parameters
[    0.173533] NET: Registered protocol family 16
[    0.173652] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.173653] ACPI: bus type pci registered
[    0.173708] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.173710] PCI: not using MMCONFIG
[    0.173711] PCI: Using configuration type 1 for base access
[    0.174418] bio: create slab  at 0
[    0.174485] ACPI: Added _OSI(Module Device)
[    0.174487] ACPI: Added _OSI(Processor Device)
[    0.174488] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.174489] ACPI: Added _OSI(Processor Aggregator Device)
[    0.176072] ACPI: EC: Look up EC in DSDT
[    0.177908] ACPI: Executed 1 blocks of module-level executable AML code
[    0.184782] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.189975] ACPI: SSDT 00000000b9d31018 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
[    0.190375] ACPI: Dynamic OEM Table Load:
[    0.190376] ACPI: SSDT           (null) 00861 (v01  PmRef  Cpu0Cst 00003001 INTL 20110112)
[    0.190590] ACPI: SSDT 00000000b9d32a98 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
[    0.191012] ACPI: Dynamic OEM Table Load:
[    0.191014] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20110112)
[    0.191117] ACPI: SSDT 00000000b9d30d98 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
[    0.191509] ACPI: Dynamic OEM Table Load:
[    0.191510] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20110112)
[    1.708585] ACPI: Interpreter enabled
[    1.708588] ACPI: (supports S0 S3 S4 S5)
[    1.708605] ACPI: Using IOAPIC for interrupt routing
[    1.708619] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.708901] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.729889] ACPI: Power Resource [APPR] (off)
[    1.732820] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.732943] ACPI: No dock devices found.
[    1.732947] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.733170] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.733173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.734082] PCI host bridge to bus 0000:00
[    1.734086] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.734088] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.734089] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.734091] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.734092] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff]
[    1.734094] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[    1.734095] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[    1.734103] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.734138] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.734148] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
[    1.734154] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.734158] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    1.734209] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.734231] pci 0000:00:14.0: reg 10: [mem 0xd0900000-0xd090ffff 64bit]
[    1.734302] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.734326] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.734350] pci 0000:00:16.0: reg 10: [mem 0xd0914000-0xd091400f 64bit]
[    1.734426] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.734461] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.734482] pci 0000:00:1a.0: reg 10: [mem 0xd0919000-0xd09193ff]
[    1.734572] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.734599] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.734614] pci 0000:00:1b.0: reg 10: [mem 0xd0910000-0xd0913fff 64bit]
[    1.734683] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.734706] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.734784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.734810] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    1.734888] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.734915] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    1.734993] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.735019] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[    1.735096] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.735128] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.735149] pci 0000:00:1d.0: reg 10: [mem 0xd0918000-0xd09183ff]
[    1.735240] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.735266] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.735390] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.735411] pci 0000:00:1f.2: reg 10: [io  0x3068-0x306f]
[    1.735419] pci 0000:00:1f.2: reg 14: [io  0x3074-0x3077]
[    1.735427] pci 0000:00:1f.2: reg 18: [io  0x3060-0x3067]
[    1.735435] pci 0000:00:1f.2: reg 1c: [io  0x3070-0x3073]
[    1.735443] pci 0000:00:1f.2: reg 20: [io  0x3040-0x305f]
[    1.735451] pci 0000:00:1f.2: reg 24: [mem 0xd0917000-0xd09177ff]
[    1.735497] pci 0000:00:1f.2: PME# supported from D3hot
[    1.735559] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.735565] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    1.735640] pci 0000:02:00.0: [197b:2392] type 00 class 0x088000
[    1.735668] pci 0000:02:00.0: reg 10: [mem 0xd0703000-0xd07030ff]
[    1.735784] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    1.735935] pci 0000:02:00.2: [197b:2391] type 00 class 0x080501
[    1.735963] pci 0000:02:00.2: reg 10: [mem 0xd0702000-0xd07020ff]
[    1.736225] pci 0000:02:00.3: [197b:2393] type 00 class 0x088000
[    1.736253] pci 0000:02:00.3: reg 10: [mem 0xd0701000-0xd07010ff]
[    1.745984] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.745991] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    1.746065] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[    1.746085] pci 0000:03:00.0: reg 10: [mem 0xd0610000-0xd061ffff]
[    1.746225] pci 0000:03:00.0: PME# supported from D0 D3hot
[    1.746273] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[    1.746292] pci 0000:03:00.1: reg 10: [mem 0xd0600000-0xd060ffff]
[    1.746432] pci 0000:03:00.1: supports D1
[    1.746434] pci 0000:03:00.1: PME# supported from D0 D1 D3hot
[    1.753982] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.753988] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.754061] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    1.754081] pci 0000:04:00.0: reg 10: [io  0x2000-0x20ff]
[    1.754115] pci 0000:04:00.0: reg 18: [mem 0xd0404000-0xd0404fff 64bit pref]
[    1.754137] pci 0000:04:00.0: reg 20: [mem 0xd0400000-0xd0403fff 64bit pref]
[    1.754229] pci 0000:04:00.0: supports D1 D2
[    1.754231] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.761941] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.761955] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.761960] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.761966] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.762014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.762044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.762079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.762106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    1.762441]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.763326]  pci0000:00: ACPI _OSC control (0x1d) granted
[    1.763847] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.763882] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.763915] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.763947] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.763979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.764011] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.764043] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.764076] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.764154] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.764157] vgaarb: loaded
[    1.764158] vgaarb: bridge control possible 0000:00:02.0
[    1.764291] SCSI subsystem initialized
[    1.764293] ACPI: bus type scsi registered
[    1.764331] libata version 3.00 loaded.
[    1.764346] ACPI: bus type usb registered
[    1.764358] usbcore: registered new interface driver usbfs
[    1.764364] usbcore: registered new interface driver hub
[    1.764382] usbcore: registered new device driver usb
[    1.764447] PCI: Using ACPI for IRQ routing
[    1.770912] PCI: pci_cache_line_size set to 64 bytes
[    1.770982] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.770984] e820: reserve RAM buffer [mem 0xb891d000-0xbbffffff]
[    1.770985] e820: reserve RAM buffer [mem 0xb9ebe000-0xbbffffff]
[    1.770986] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    1.770988] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
[    1.771053] NetLabel: Initializing
[    1.771054] NetLabel:  domain hash size = 128
[    1.771055] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.771063] NetLabel:  unlabeled traffic allowed by default
[    1.771106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.771111] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.774121] Switching to clocksource hpet
[    1.778257] AppArmor: AppArmor Filesystem Enabled
[    1.778279] pnp: PnP ACPI init
[    1.778290] ACPI: bus type pnp registered
[    1.778428] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.778430] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.778432] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.778433] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.778435] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.778437] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.778439] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.778440] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.778442] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.778445] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.778513] pnp 00:01: [dma 4]
[    1.778530] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.778546] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.778587] system 00:03: [io  0xfe00-0xfe0f] has been reserved
[    1.778589] system 00:03: [io  0xfe80-0xfe8f] has been reserved
[    1.778591] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.778593] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.778678] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.778704] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.778736] system 00:06: [io  0x0200-0x027f] has been reserved
[    1.778738] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.778740] system 00:06: [io  0xffff] has been reserved
[    1.778741] system 00:06: [io  0xffff] has been reserved
[    1.778743] system 00:06: [io  0x0400-0x047f] has been reserved
[    1.778744] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.778746] system 00:06: [io  0xef80-0xef9f] has been reserved
[    1.778748] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.778768] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.778867] pnp 00:08: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.778888] pnp 00:09: Plug and Play ACPI device, IDs SYN0195 SYN0100 SYN0002 PNP0f13 (active)
[    1.779064] pnp 00:0a: Plug and Play ACPI device, IDs HPQ6000 (active)
[    1.779113] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[    1.779115] system 00:0b: [mem 0x40004000-0x40004fff] could not be reserved
[    1.779117] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.779260] pnp: PnP ACPI: found 12 devices
[    1.779261] ACPI: ACPI bus type pnp unregistered
[    1.785122] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.785166] pci 0000:00:1c.2: BAR 15: assigned [mem 0xbf200000-0xbf2fffff pref]
[    1.785168] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.785173] pci 0000:00:1c.0:   bridge window [mem 0xd0800000-0xd08fffff]
[    1.785183] pci 0000:02:00.0: BAR 6: assigned [mem 0xbf200000-0xbf20ffff pref]
[    1.785184] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.785190] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    1.785194] pci 0000:00:1c.2:   bridge window [mem 0xbf200000-0xbf2fffff pref]
[    1.785200] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.785205] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.785214] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.785217] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    1.785222] pci 0000:00:1c.5:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.785227] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.785238] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[    1.785268] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.785269] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.785271] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.785272] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff]
[    1.785274] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[    1.785275] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[    1.785277] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff]
[    1.785279] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff]
[    1.785280] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf2fffff pref]
[    1.785282] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff]
[    1.785284] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    1.785285] pci_bus 0000:04: resource 1 [mem 0xd0500000-0xd05fffff]
[    1.785287] pci_bus 0000:04: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref]
[    1.785312] NET: Registered protocol family 2
[    1.785462] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.785696] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.785871] TCP: Hash tables configured (established 65536 bind 65536)
[    1.785892] TCP: reno registered
[    1.785903] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.785931] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.785998] NET: Registered protocol family 1
[    1.786008] pci 0000:00:02.0: Boot video device
[    1.786016] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    1.786020] pci 0000:00:14.0: can't derive routing for PCI INT A
[    1.786022] pci 0000:00:14.0: PCI INT A: no GSI
[    1.786062] pci 0000:00:14.0: can't derive routing for PCI INT A
[    1.786176] PCI: CLS 64 bytes, default 64
[    1.786211] Trying to unpack rootfs image as initramfs...
[    2.008513] Freeing initrd memory: 15776k freed
[    2.010396] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.010401] software IO TLB [mem 0xa901e000-0xad01e000] (64MB) mapped at [ffff8800a901e000-ffff8800ad01dfff]
[    2.010738] Initialise module verification
[    2.010774] audit: initializing netlink socket (disabled)
[    2.010782] type=2000 audit(1368827348.956:1): initialized
[    2.037105] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.038283] VFS: Disk quotas dquot_6.5.2
[    2.038312] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.038656] fuse init (API version 7.20)
[    2.038713] msgmni has been set to 15726
[    2.039082] Key type asymmetric registered
[    2.039084] Asymmetric key parser 'x509' registered
[    2.039109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.039130] io scheduler noop registered
[    2.039132] io scheduler deadline registered (default)
[    2.039137] io scheduler cfq registered
[    2.039257] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    2.039356] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[    2.039451] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    2.039544] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    2.039619] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    2.039624] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    2.039640] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    2.039641] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.039643] pci 0000:02:00.2: Signaling PME through PCIe PME interrupt
[    2.039644] pci 0000:02:00.3: Signaling PME through PCIe PME interrupt
[    2.039648] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    2.039665] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    2.039666] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.039667] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    2.039672] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    2.039687] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    2.039688] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    2.039693] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    2.039702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.039711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.039755] efifb: probing for efifb
[    2.040134] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010f80000, using 4160k, total 4160k
[    2.040135] efifb: mode is 1366x768x32, linelength=5464, pages=1
[    2.040136] efifb: scrolling: redraw
[    2.040137] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.043090] Console: switching to colour frame buffer device 170x48
[    2.045848] fb0: EFI VGA frame buffer device
[    2.045853] intel_idle: MWAIT substates: 0x21120
[    2.045854] intel_idle: v0.4 model 0x3A
[    2.045854] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.046028] ACPI: AC Adapter [AC] (on-line)
[    2.046175] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.046178] ACPI: Sleep Button [SLPB]
[    2.046203] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.046220] ACPI: Lid Switch [LID]
[    2.046245] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.046247] ACPI: Power Button [PWRF]
[    2.046308] ACPI: Requesting acpi_cpufreq
[    2.074551] thermal LNXTHERM:00: registered as thermal_zone0
[    2.074553] ACPI: Thermal Zone [CPUZ] (53 C)
[    2.099513] thermal LNXTHERM:01: registered as thermal_zone1
[    2.099515] ACPI: Thermal Zone [GFXZ] (0 C)
[    2.114419] thermal LNXTHERM:02: registered as thermal_zone2
[    2.114420] ACPI: Thermal Zone [EXTZ] (43 C)
[    2.129411] thermal LNXTHERM:03: registered as thermal_zone3
[    2.129412] ACPI: Thermal Zone [LOCZ] (40 C)
[    2.145385] thermal LNXTHERM:04: registered as thermal_zone4
[    2.145386] ACPI: Thermal Zone [BATZ] (30 C)
[    2.145602] thermal LNXTHERM:05: registered as thermal_zone5
[    2.145603] ACPI: Thermal Zone [PCHZ] (0 C)
[    2.145689] thermal LNXTHERM:06: registered as thermal_zone6
[    2.145691] ACPI: Thermal Zone [DM1Z] (0 C)
[    2.145761] thermal LNXTHERM:07: registered as thermal_zone7
[    2.145762] ACPI: Thermal Zone [DM2Z] (0 C)
[    2.145791] GHES: HEST is not enabled!
[    2.145868] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.146962] Linux agpgart interface v0.103
[    2.147826] brd: module loaded
[    2.148263] loop: module loaded
[    2.148490] libphy: Fixed MDIO Bus: probed
[    2.148533] tun: Universal TUN/TAP device driver, 1.6
[    2.148534] tun: (C) 1999-2004 Max Krasnyansky 
[    2.148562] PPP generic driver version 2.4.2
[    2.148604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.148605] ehci-pci: EHCI PCI platform driver
[    2.148641] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.148645] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.148649] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.148662] ehci-pci 0000:00:1a.0: debug port 2
[    2.152561] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.152575] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0919000
[    2.161655] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.161680] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.161682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.161683] usb usb1: Product: EHCI Host Controller
[    2.161685] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[    2.161686] usb usb1: SerialNumber: 0000:00:1a.0
[    2.161773] hub 1-0:1.0: USB hub found
[    2.161777] hub 1-0:1.0: 2 ports detected
[    2.161881] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.161885] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.161889] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.161900] ehci-pci 0000:00:1d.0: debug port 2
[    2.165788] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.165792] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd0918000
[    2.177645] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.177656] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.177657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.177659] usb usb2: Product: EHCI Host Controller
[    2.177660] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[    2.177662] usb usb2: SerialNumber: 0000:00:1d.0
[    2.177743] hub 2-0:1.0: USB hub found
[    2.177745] hub 2-0:1.0: 2 ports detected
[    2.177829] ehci-platform: EHCI generic platform driver
[    2.177834] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.177846] uhci_hcd: USB Universal Host Controller Interface driver
[    2.177865] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    2.177866] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    2.177886] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    2.177889] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.177892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.177976] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.178017] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    2.178062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.178063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.178065] usb usb3: Product: xHCI Host Controller
[    2.178066] usb usb3: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
[    2.178067] usb usb3: SerialNumber: 0000:00:14.0
[    2.178123] xHCI xhci_add_endpoint called for root hub
[    2.178125] xHCI xhci_check_bandwidth called for root hub
[    2.178138] hub 3-0:1.0: USB hub found
[    2.178145] hub 3-0:1.0: 4 ports detected
[    2.178368] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.178371] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.178388] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.178390] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.178391] usb usb4: Product: xHCI Host Controller
[    2.178393] usb usb4: Manufacturer: Linux 3.8.0-21-generic xhci_hcd
[    2.178394] usb usb4: SerialNumber: 0000:00:14.0
[    2.178446] xHCI xhci_add_endpoint called for root hub
[    2.178447] xHCI xhci_check_bandwidth called for root hub
[    2.178462] hub 4-0:1.0: USB hub found
[    2.178468] hub 4-0:1.0: 4 ports detected
[    2.178764] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.180595] i8042: Detected active multiplexing controller, rev 1.1
[    2.181365] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.181370] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.181388] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.181399] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.181411] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.181481] mousedev: PS/2 mouse device common for all mice
[    2.181586] rtc_cmos 00:07: RTC can wake from S4
[    2.181720] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    2.181748] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.181808] device-mapper: uevent: version 1.0.3
[    2.181849] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    2.181907] cpuidle: using governor ladder
[    2.181979] cpuidle: using governor menu
[    2.181984] ledtrig-cpu: registered to indicate activity on CPUs
[    2.181985] EFI Variables Facility v0.08 2004-May-17
[    2.188565] ACPI: Battery Slot [BAT0] (battery present)
[    2.248221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.364217] ashmem: initialized
[    2.364311] TCP: cubic registered
[    2.364376] NET: Registered protocol family 10
[    2.364503] NET: Registered protocol family 17
[    2.364512] Key type dns_resolver registered
[    2.364700] Loading module verification certificates
[    2.365459] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
[    2.365468] registered taskstats version 1
[    2.367610] Key type trusted registered
[    2.369272] Key type encrypted registered
[    2.371401] rtc_cmos 00:07: setting system clock to 2013-05-17 21:49:10 UTC (1368827350)
[    2.371940] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.371942] EDD information not available.
[    2.373088] Freeing unused kernel memory: 992k freed
[    2.373191] Write protecting the kernel read-only data: 12288k
[    2.375505] Freeing unused kernel memory: 1176k freed
[    2.377785] Freeing unused kernel memory: 1080k freed
[    2.387038] udevd[108]: starting version 175
[    2.410446] sdhci: Secure Digital Host Controller Interface driver
[    2.410449] sdhci: Copyright(c) Pierre Ossman
[    2.411598] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2392] (rev 30)
[    2.411612] sdhci-pci 0000:02:00.0: enabling device (0000 -> 0002)
[    2.411653] mmc0: no vqmmc regulator found
[    2.411654] mmc0: no vmmc regulator found
[    2.432692] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.432929] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[    2.433109] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c72000, b4:b5:2f:89:f4:ed, XID 0c900880 IRQ 45
[    2.433112] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.441291] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    2.441317] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2391] (rev 30)
[    2.441338] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[    2.441659] Disabling lock debugging due to kernel taint
[    2.442089] ahci 0000:00:1f.2: version 3.0
[    2.442134] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    2.442157] ahci: SSS flag set, parallel bus scan disabled
[    2.442179] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    2.442181] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    2.442185] ahci 0000:00:1f.2: setting latency timer to 64
[    2.452811] scsi0 : ahci
[    2.452900] scsi1 : ahci
[    2.452952] scsi2 : ahci
[    2.453010] scsi3 : ahci
[    2.453058] scsi4 : ahci
[    2.453103] scsi5 : ahci
[    2.453128] ata1: SATA max UDMA/133 abar m2048@0xd0917000 port 0xd0917100 irq 46
[    2.453131] ata2: SATA max UDMA/133 abar m2048@0xd0917000 port 0xd0917180 irq 46
[    2.453132] ata3: DUMMY
[    2.453133] ata4: DUMMY
[    2.453134] ata5: DUMMY
[    2.453134] ata6: DUMMY
[    2.473271] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.605842] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.605855] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.606224] hub 1-1:1.0: USB hub found
[    2.606295] hub 1-1:1.0: 6 ports detected
[    2.606644] ACPI Warning: For \_SB_.PCI0.EHC2.RHUB.PRT0.HPT2._PLD: Return Package has no elements (empty) (20121018/nspredef-463)
[    2.717005] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.768962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.770403] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.770617] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA7A0, max UDMA/100
[    2.770624] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.772148] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.772292] ata1.00: configured for UDMA/100
[    2.777176] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    2.777405] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.777411] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.777440] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.777490] sd 0:0:0:0: [sda] Write Protect is off
[    2.777493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.777504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.844924]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    2.845732] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.849271] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.849274] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.849674] hub 2-1:1.0: USB hub found
[    2.849853] hub 2-1:1.0: 6 ports detected
[    2.920972] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    3.008621] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    3.008627] Switching to clocksource tsc
[    3.014481] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
[    3.014484] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.014486] usb 1-1.1: SerialNumber: 00a018c8e38d
[    3.084717] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    3.096511] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.104453] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.104470] ata2.00: ATAPI: hp       CDDVDW SN-208BB, HH05, max UDMA/100
[    3.118654] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.118672] ata2.00: configured for UDMA/100
[    3.134759] scsi 1:0:0:0: CD-ROM            hp       CDDVDW SN-208BB  HH05 PQ: 0 ANSI: 5
[    3.148915] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.148918] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.149115] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.149292] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.225988] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b370
[    3.225995] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.225999] usb 1-1.3: Product: HP HD Webcam [Fixed]
[    3.226002] usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd.
[    3.226005] usb 1-1.3: SerialNumber: SN0001
[    4.679742] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[   13.067977] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.101889] udevd[379]: starting version 175
[   13.351125] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   13.352173] mei 0000:00:16.0: setting latency timer to 64
[   13.352233] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[   13.352472] lp: driver loaded but no devices found
[   13.357116] jmb38x_ms 0000:02:00.3: enabling device (0000 -> 0002)
[   13.363323] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[   13.363331] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.363335] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   13.363339] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.363341] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[   13.363344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.363346] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.366649] [drm] Initialized drm 1.1.0 20060810
[   13.382385] wmi: Mapper loaded
[   13.400406] [drm] Memory usable by graphics device = 2048M
[   13.400411] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[   13.400413] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[   13.400445] Console: switching to colour dummy device 80x25
[   13.400622] i915 0000:00:02.0: setting latency timer to 64
[   13.401415] cfg80211: Calling CRDA to update world regulatory domain
[   13.420012] hp_accel: laptop model unknown, using default axes configuration
[   13.434013] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[   13.434025] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.434027] [drm] Driver supports precise vblank timestamp query.
[   13.434119] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.435052] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   13.444924] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   13.446266] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   13.446718] rt2800pci 0000:03:00.0: enabling device (0000 -> 0002)
[   13.449805] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[   13.456217] Linux video capture interface: v2.00
[   13.464683] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b370)
[   13.475299] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.499934] input: HP WMI hotkeys as /devices/virtual/input/input4
[   13.516720] type=1400 audit(1368827361.655:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=542 comm="apparmor_parser"
[   13.516937] type=1400 audit(1368827361.655:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=678 comm="apparmor_parser"
[   13.516944] type=1400 audit(1368827361.655:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=543 comm="apparmor_parser"
[   13.517012] type=1400 audit(1368827361.655:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=542 comm="apparmor_parser"
[   13.517171] type=1400 audit(1368827361.655:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=542 comm="apparmor_parser"
[   13.517286] type=1400 audit(1368827361.655:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
[   13.517291] type=1400 audit(1368827361.655:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=543 comm="apparmor_parser"
[   13.517480] type=1400 audit(1368827361.655:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
[   13.517485] type=1400 audit(1368827361.655:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=543 comm="apparmor_parser"
[   13.546850] lis3lv02d: 8 bits 3DC sensor found
[   13.565584] cfg80211: World regulatory domain updated:
[   13.565588] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.565589] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.565591] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.565592] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.565593] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.565594] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.653098] fbcon: inteldrmfb (fb0) is primary device
[   13.725630] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[   13.725827] usbcore: registered new interface driver uvcvideo
[   13.725828] USB Video Class driver (1.1.1)
[   14.343996] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400, board id: 1398, fw id: 958908
[   14.353958] Console: switching to colour frame buffer device 170x48
[   14.356786] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.356788] i915 0000:00:02.0: registered panic notifier
[   14.389554] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   14.857566] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   14.865288] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   14.871021] acpi device:03: registered as cooling_device4
[   14.871207] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.871243] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   14.871330] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.871366] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   14.871438] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   14.909785] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.909858] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.909905] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.918826] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   17.853484] init: failsafe main process (918) killed by TERM signal
[   18.100046] Bluetooth: Core ver 2.16
[   18.100062] NET: Registered protocol family 31
[   18.100063] Bluetooth: HCI device and connection manager initialized
[   18.100069] Bluetooth: HCI socket layer initialized
[   18.100071] Bluetooth: L2CAP socket layer initialized
[   18.100074] Bluetooth: SCO socket layer initialized
[   18.102383] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.102386] Bluetooth: BNEP filters: protocol multicast
[   18.102392] Bluetooth: BNEP socket layer initialized
[   18.103216] Bluetooth: RFCOMM TTY layer initialized
[   18.103224] Bluetooth: RFCOMM socket layer initialized
[   18.103225] Bluetooth: RFCOMM ver 1.11
[   18.482137] ppdev: user-space parallel port driver

Postup zprovoznění pod Linuxem

V Ubuntu 13.04 funguje wifi a stejně tak USB3.0 ihned po spuštění systému. Funguje suspend to ram. Zvuk, grafika atd. Kernel 3.8.0

Nefunguje bluetooth a hw tlačítko pro ovládání wifi. HW tlačítko by mělo jít řešit.

Nefungovalo ovládání jasu z důvodu chybného acpi ovládání. Rěšení:

/etc/X11/xorg.conf.d/backlight.conf

Section "Device"
  Identifier "Device0"
  Option "Backlight" "intel_backlight"
EndSection

Nefungovala čtečka pam. karet. Řešením je restartovat do BIOSu, čtečku zakázat, pak nabootovat Linux. Znova restart do BIOSu a čtečku povolit. Poté je čtečka funkční.

Poznámka

Pokud se rozhodnete pro upgrade RAM, vězte, že na internetu se vyskytují hlášení o problémech s moduly 8GB DDR3 napříč různými typy HP Probook. Ovšem 4340s s nejnovějším biosem F40 lze osadit bez problémů 8GB moduly. Testováno 4/8/12 GB Ram.

 

Vypadá to, že notebook používá GPT tabulku oddílů, vytvořenou Windows 8. Po instalaci Ubuntu se neobjeví žádný zavaděč Grub, ale volba ubuntu je přístupná přímo v Boot options po stisknutí ESC a dále F9. Toto platí pro dualboot s Windows.

Dokument vytvořil: luta, 18.5.2013 00:51 | Poslední úprava: luta, 18.5.2013 09:59 | Historie změn | Zobrazeno: 995×

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267   www.czech-server.cz
© 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.