Gigabyte Z68x-ud3h-b3

Technické parametry

Čipset 	
    Intel® Z68 Express Chipset

Paměť 	
    4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
    Dual channel memory architecture
    Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
    Support for non-ECC memory modules
    Support for Extreme Memory Profile (XMP) memory modules

Integrovaná grafická karta 	Integrated Graphics Processor:
    1 x DisplayPort, supporting a maximum resolution of 2560x1600p
    1 x DVI-D port, supporting a maximum resolution of 1920x1200
    *The DVI-D port does not support D-Sub connection by adapter.
    1 x D-Sub port
    1 x HDMI port, supporting a maximum resolution of 1920x1200

Audio 	
    Support for S/PDIF Out
    2/4/5.1/7.1-channel
    Support for Dolby® Home Theater
    Realtek ALC889 codec
    High Definition Audio

LAN 	
    1 x RTL8111E chip (10/100/1000 Mbit)

Rozšiřující sloty 	
    1 x PCI Express x16 slot, running at x8 (PCIEX8)
    * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated with a PCI Express graphics card, the PCIEX16 slot will operate at up to x8 mode.
    1 x PCI Express x16 slot, running at x16 (PCIEX16)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
    3 x PCI Express x1 slot (All PCI Express slots conform to PCI Express 2.0 standard.)
    2 x PCI

Multi Graphics Technology 	
    Support for ATI CrossFireX™/NVIDIA SLI technology
    * The PCIEX16 slot operates at up to x8 mode when ATI CrossFireX™/NVIDIA SLI is enabled.

Storage Interface 	Chipset:
    3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
    2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
    Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
    1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device

Marvell 88SE9172 chip:
    2 x SATA 6Gb/s connectors (GSATA3_5, GSATA3_6) supporting up to 2 SATA 6Gb/s devices
    Support for SATA RAID 0 and RAID 1

USB 	Čipset:
    Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets connected to the internal USB headers)

2 x Etron EJ168 chips:
    Up to 4 USB 3.0/2.0 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)

IEEE 1394 	VIA VT6308 chip:
    Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)

Interní I / O konektory 	
    1 x USB 3.0/2.0 header
    4 x SATA 6Gb/s connectors
    1 x front panel audio header
    1 x 24-pin ATX main power connector
    1 x front panel header
    1 x CPU fan header
    1 x clearing CMOS jumper
    1 x serial port
    1 x IEEE 1394a
    3 x SATA 3Gb/s
    2 x system fan headers
    4 x USB 2.0/1.1
    1 x 8-pin ATX 12V power connector
    1 x power fan connector
    1 x Trusted Platform Module (TPM) header
    TPM function is optional due to different regional policy
    1 x SPDIF out

Konektory na zadním panelu 	
    1 x eSATA 3Gb/s connector
    1 x DVI-D port
    1 x D-Sub port
    1 x PS/2 keyboard/mouse port
    1 x DisplayPort
    2 x USB 3.0/2.0
    1 x HDMI port
    1 x SPDIF out (optical)
    1 x IEEE 1394a
    6 x audio ports (Line In / Line Out / MIC In / Surround Speaker Out(Rear Speaker Out) / Center/Subwoofer Speaker Out / Side Speaker Out)
    4 x USB 2.0/1.1
    1 x RJ45 LAN

I / O řadič 	
    iTE IT8728

Monitoring HW 	
    CPU/System fan speed control
    *Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
    CPU/System/Power fan failure warning
    CPU/System/Power fan speed detection
    CPU overheating warning
    System voltage detection
    CPU/System temperature detection

Identifikace pod Linuxem

dhcppc9:~ # lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
02:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
03:00.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
03:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
04:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)

Postup zprovoznění pod Linuxem

Funguje out of box. Pouze pro zprovoznění monitoringu lm_sensors na chipu iTE IT8728 je třeba provést zavedení modprobe it87 force_id=0x8721. Pak sensors poskytují výpis

dhcppc9:~ # sensors
it8721-isa-0290
Adapter: ISA adapter
in0:          +1.04 V  (min =  +0.00 V, max =  +3.06 V)
in1:          +2.04 V  (min =  +0.00 V, max =  +3.06 V)
in2:          +2.96 V  (min =  +0.00 V, max =  +3.06 V)
in3:          +2.95 V  (min =  +0.00 V, max =  +3.06 V)
in4:          +0.18 V  (min =  +0.00 V, max =  +3.06 V)
in5:          +1.09 V  (min =  +0.00 V, max =  +3.06 V)
in6:          +1.67 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:         +3.36 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:         +3.10 V  
fan1:         698 RPM  (min =    0 RPM)
fan2:         710 RPM  (min =    0 RPM)
fan3:           0 RPM  (min =    0 RPM)
fan4:        1374 RPM  (min =    0 RPM)
temp1:        +31.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +25.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +24.0°C  (low  = +127.0°C, high = +70.0°C)  sensor = thermistor
intrusion0:  ALARM

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +34.0°C  (high = +80.0°C, crit = +98.0°C)
Core 0:         +34.0°C  (high = +80.0°C, crit = +98.0°C)
Core 1:         +30.0°C  (high = +80.0°C, crit = +98.0°C)
Core 2:         +28.0°C  (high = +80.0°C, crit = +98.0°C)
Core 3:         +33.0°C  (high = +80.0°C, crit = +98.0°C)

Poznámka

V lspci není indikována interní zvuková karta. Je vypnuta v BIOSu, používám ASUS Xonar Essence ST.

Dokument vytvořil: lertimir, 2.12.2011 13:35 | Zobrazeno: 792×