Dotaz: dlhy cas od spustenia po zobrazenie grub

[jany2]

Zdravim

Mam taky pocit, ze dost vela casu prejde od zapnutia PC (on/off) az po nabehnutie grub. Priblizne 30 sek. Mozno je to normalne, ale zada sa mi to dost vela. Je mozne nejak skratit tento cas ?

Neviem ci bude potrebny, ale pre istotu tu prilozim dmesg

thx

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. EP41-UD3L/EP41-UD3L, BIOS F4 04/03/2009
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 130000000 mask FF0000000 uncachable
[    0.000000]   5 base 0CFF00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 2, base: 3328MB, range: 256MB, type UC
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4864MB, range: 256MB, type UC
[    0.000000] reg 5, base: 3327MB, range: 1MB, type UC
[    0.000000] total RAM covered: 4095M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 2M     num_reg: 6      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 512MB, type WB
[    0.000000] reg 5, base: 4608MB, range: 256MB, type WB
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000f5260-0x000f526f] mapped at [c00f5260]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36334000-0x37191fff]
[    0.000000] ACPI: RSDP 000f6c60 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT cfee3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP cfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT cfee3180 03A5D (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS cfee0000 00040
[    0.000000] ACPI: HPET cfee6d40 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG cfee6dc0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC cfee6c40 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT cfee7460 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3972MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x2fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfedffff]
[    0.000000]   node   0: [mem 0x00000000-0x2fffffff]
[    0.000000] On node 0 totalpages: 1048175
[    0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f3d34200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 7945 pages used for memmap
[    0.000000]   HighMem zone: 811993 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1038446
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=10b28249-d4e7-43d1-84fe-1cd5577e4406 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] allocated 9961344 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00130000)
[    0.000000] Memory: 4117640k/4980736k available (5956k kernel code, 75060k reserved, 2928k data, 756k init, 3279752k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18ae000 - 0xc196b000   ( 756 kB)
[    0.000000]       .data : 0xc15d1358 - 0xc18ad6c0   (2928 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d1358   (5956 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2799.943 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.88 BogoMIPS (lpj=11199772)
[    0.004005] pid_max: default: 32768 minimum: 301
[    0.008018] Security Framework initialized
[    0.008031] AppArmor: AppArmor initialized
[    0.008032] Yama: becoming mindful.
[    0.008077] Mount-cache hash table entries: 512
[    0.008284] Initializing cgroup subsys cpuacct
[    0.008286] Initializing cgroup subsys memory
[    0.008293] Initializing cgroup subsys devices
[    0.008295] Initializing cgroup subsys freezer
[    0.008297] Initializing cgroup subsys blkio
[    0.008298] Initializing cgroup subsys perf_event
[    0.008326] CPU: Physical Processor ID: 0
[    0.008328] CPU: Processor Core ID: 0
[    0.008330] mce: CPU supports 6 MCE banks
[    0.008336] CPU0: Thermal monitoring enabled (TM2)
[    0.008339] using mwait in idle threads.
[    0.010479] ACPI: Core revision 20120320
[    0.012739] ftrace: allocating 24585 entries in 49 pages
[    0.020058] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061867] CPU0: Intel Pentium(R) Dual-Core  CPU      E6300  @ 2.80GHz stepping 0a
[    0.064003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.064003] ... version:                2
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064003] CPU 1 irqstacks, hard=f7516000 soft=f7518000
[    0.008000] Initializing CPU#1
[    0.064003] Booting Node   0, Processors  #1
[    0.072065] Brought up 2 CPUs
[    0.072069] Total of 2 processors activated (11199.77 BogoMIPS).
[    0.073582] devtmpfs: initialized
[    0.073582] EVM: security.selinux
[    0.073582] EVM: security.SMACK64
[    0.073582] EVM: security.capability
[    0.073582] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.073582] dummy: 
[    0.073582] RTC time: 11:16:59, date: 03/15/13
[    0.073582] NET: Registered protocol family 16
[    0.076056] Trying to unpack rootfs image as initramfs...
[    0.076007] EISA bus registered
[    0.076007] ACPI: bus type pci registered
[    0.076007] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.076007] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.076007] PCI: Using MMCONFIG for extended config space
[    0.076007] PCI: Using configuration type 1 for base access
[    0.076515] bio: create slab <bio-0> at 0
[    0.076605] ACPI: Added _OSI(Module Device)
[    0.076607] ACPI: Added _OSI(Processor Device)
[    0.076609] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.076611] ACPI: Added _OSI(Processor Aggregator Device)
[    0.077333] ACPI: EC: Look up EC in DSDT
[    0.080185] ACPI: SSDT cfee6e40 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.080369] ACPI: Dynamic OEM Table Load:
[    0.080372] ACPI: SSDT   (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.080532] ACPI: SSDT cfee7300 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.080709] ACPI: Dynamic OEM Table Load:
[    0.080712] ACPI: SSDT   (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.080851] ACPI: Interpreter enabled
[    0.080869] ACPI: (supports S0 S3 S4 S5)
[    0.080888] ACPI: Using IOAPIC for interrupt routing
[    0.084952] ACPI: No dock devices found.
[    0.084962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.085015] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.085087] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
[    0.085090] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0xffff]
[    0.085093] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
[    0.085095] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
[    0.085098] pci_root PNP0A03:00: >host bridge window [mem 0xcff00000-0xfebfffff]
[    0.085139] PCI host bridge to bus 0000:00
[    0.085142] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
[    0.085144] pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
[    0.085147] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[    0.085149] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
[    0.085151] pci_bus 0000:00: >root bus resource [mem 0xcff00000-0xfebfffff]
[    0.085162] pci 0000:00:00.0: >[8086:2e30] type 00 class 0x060000
[    0.085211] pci 0000:00:01.0: >[8086:2e31] type 01 class 0x060400
[    0.085253] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[    0.085296] pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
[    0.085312] pci 0000:00:1b.0: >reg 10: [mem 0xe7200000-0xe7203fff 64bit]
[    0.085378] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[    0.085399] pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
[    0.085468] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[    0.085492] pci 0000:00:1c.3: >[8086:27d6] type 01 class 0x060400
[    0.085563] pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
[    0.085586] pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
[    0.085625] pci 0000:00:1d.0: >reg 20: [io  0xe000-0xe01f]
[    0.085655] pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
[    0.085694] pci 0000:00:1d.1: >reg 20: [io  0xe100-0xe11f]
[    0.085725] pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
[    0.085764] pci 0000:00:1d.2: >reg 20: [io  0xe200-0xe21f]
[    0.085794] pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
[    0.085834] pci 0000:00:1d.3: >reg 20: [io  0xe300-0xe31f]
[    0.085871] pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
[    0.085888] pci 0000:00:1d.7: >reg 10: [mem 0xe7204000-0xe72043ff]
[    0.085972] pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
[    0.086033] pci 0000:00:1f.0: >[8086:27b8] type 00 class 0x060100
[    0.086113] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.086116] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.086161] pci 0000:00:1f.2: >[8086:27c0] type 00 class 0x01018a
[    0.086175] pci 0000:00:1f.2: >reg 10: [io  0x0000-0x0007]
[    0.086183] pci 0000:00:1f.2: >reg 14: [io  0x0000-0x0003]
[    0.086191] pci 0000:00:1f.2: >reg 18: [io  0x0000-0x0007]
[    0.086199] pci 0000:00:1f.2: >reg 1c: [io  0x0000-0x0003]
[    0.086207] pci 0000:00:1f.2: >reg 20: [io  0xf000-0xf00f]
[    0.086242] pci 0000:00:1f.2: >PME# supported from D3hot
[    0.086256] pci 0000:00:1f.3: >[8086:27da] type 00 class 0x0c0500
[    0.086306] pci 0000:00:1f.3: >reg 20: [io  0x0500-0x051f]
[    0.086374] pci 0000:01:00.0: >[1002:9540] type 00 class 0x030000
[    0.086389] pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.086400] pci 0000:01:00.0: >reg 18: [mem 0xe5000000-0xe500ffff 64bit]
[    0.086408] pci 0000:01:00.0: >reg 20: [io  0xc000-0xc0ff]
[    0.086423] pci 0000:01:00.0: >reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.086456] pci 0000:01:00.0: >supports D1 D2
[    0.086476] pci 0000:01:00.1: >[1002:aa38] type 00 class 0x040300
[    0.086489] pci 0000:01:00.1: >reg 10: [mem 0xe5010000-0xe5013fff 64bit]
[    0.086549] pci 0000:01:00.1: >supports D1 D2
[    0.086580] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.086583] pci 0000:00:01.0: >  bridge window [io  0xc000-0xcfff]
[    0.086586] pci 0000:00:01.0: >  bridge window [mem 0xe4000000-0xe5ffffff]
[    0.086591] pci 0000:00:01.0: >  bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.086629] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[    0.086692] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
[    0.086709] pci 0000:03:00.0: >reg 10: [io  0xd000-0xd0ff]
[    0.086739] pci 0000:03:00.0: >reg 18: [mem 0xe7010000-0xe7010fff 64bit pref]
[    0.086757] pci 0000:03:00.0: >reg 20: [mem 0xe7000000-0xe700ffff 64bit pref]
[    0.086770] pci 0000:03:00.0: >reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.086835] pci 0000:03:00.0: >supports D1 D2
[    0.086837] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.096027] pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
[    0.096033] pci 0000:00:1c.3: >  bridge window [io  0xd000-0xdfff]
[    0.096037] pci 0000:00:1c.3: >  bridge window [mem 0xe6000000-0xe6ffffff]
[    0.096043] pci 0000:00:1c.3: >  bridge window [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.096075] pci 0000:04:02.0: >[1822:4e35] type 00 class 0x048000
[    0.096089] pci 0000:04:02.0: >reg 10: [mem 0xe7100000-0xe7100fff pref]
[    0.096183] pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode)
[    0.096193] pci 0000:00:1e.0: >  bridge window [mem 0xe7100000-0xe71fffff 64bit pref]
[    0.096195] pci 0000:00:1e.0: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.096198] pci 0000:00:1e.0: >  bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.096200] pci 0000:00:1e.0: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.096203] pci 0000:00:1e.0: >  bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.096205] pci 0000:00:1e.0: >  bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.096222] pci_bus 0000:00: >on NUMA node 0
[    0.096228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.096408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.096457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.096505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.096633]  pci0000:00: >Requesting ACPI _OSC control (0x1d)
[    0.096636]  pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.096637] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.103455] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.103505] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.103553] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.103600] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.103646] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.103694] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.103742] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.103790] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.103907] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.103911] vgaarb: loaded
[    0.103912] vgaarb: bridge control possible 0000:01:00.0
[    0.104142] SCSI subsystem initialized
[    0.104194] libata version 3.00 loaded.
[    0.104216] ACPI: bus type usb registered
[    0.104239] usbcore: registered new interface driver usbfs
[    0.104249] usbcore: registered new interface driver hub
[    0.104273] usbcore: registered new device driver usb
[    0.104358] PCI: Using ACPI for IRQ routing
[    0.105725] PCI: pci_cache_line_size set to 64 bytes
[    0.105792] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.105794] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.105895] NetLabel: Initializing
[    0.105897] NetLabel:  domain hash size = 128
[    0.105898] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.105908] NetLabel:  unlabeled traffic allowed by default
[    0.106005] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.106009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.106014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.112160] Switching to clocksource hpet
[    0.120429] AppArmor: AppArmor Filesystem Enabled
[    0.120458] pnp: PnP ACPI init
[    0.120477] ACPI: bus type pnp registered
[    0.120577] pnp 00:00: >[bus 00-3f]
[    0.120580] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.120583] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.120585] pnp 00:00: >[io  0x0d00-0xffff window]
[    0.120588] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.120590] pnp 00:00: >[mem 0x000c0000-0x000dffff window]
[    0.120592] pnp 00:00: >[mem 0xcff00000-0xfebfffff window]
[    0.120646] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.120706] pnp 00:01: >[io  0x0010-0x001f]
[    0.120708] pnp 00:01: >[io  0x0022-0x003f]
[    0.120710] pnp 00:01: >[io  0x0044-0x005f]
[    0.120713] pnp 00:01: >[io  0x0062-0x0063]
[    0.120715] pnp 00:01: >[io  0x0065-0x006f]
[    0.120717] pnp 00:01: >[io  0x0074-0x007f]
[    0.120719] pnp 00:01: >[io  0x0091-0x0093]
[    0.120721] pnp 00:01: >[io  0x00a2-0x00bf]
[    0.120725] pnp 00:01: >[io  0x00e0-0x00ef]
[    0.120728] pnp 00:01: >[io  0x04d0-0x04d1]
[    0.120730] pnp 00:01: >[io  0x0290-0x029f]
[    0.120732] pnp 00:01: >[io  0x0800-0x087f]
[    0.120734] pnp 00:01: >[io  0x0290-0x0294]
[    0.120736] pnp 00:01: >[io  0x0880-0x088f]
[    0.120792] system 00:01: >[io  0x04d0-0x04d1] has been reserved
[    0.120795] system 00:01: >[io  0x0290-0x029f] has been reserved
[    0.120797] system 00:01: >[io  0x0800-0x087f] has been reserved
[    0.120800] system 00:01: >[io  0x0290-0x0294] has been reserved
[    0.120803] system 00:01: >[io  0x0880-0x088f] has been reserved
[    0.120807] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120819] pnp 00:02: >[dma 4]
[    0.120822] pnp 00:02: >[io  0x0000-0x000f]
[    0.120824] pnp 00:02: >[io  0x0080-0x0090]
[    0.120826] pnp 00:02: >[io  0x0094-0x009f]
[    0.120828] pnp 00:02: >[io  0x00c0-0x00df]
[    0.120858] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.120906] pnp 00:03: >[irq 0 disabled]
[    0.120917] pnp 00:03: >[irq 8]
[    0.120919] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
[    0.120949] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
[    0.120975] pnp 00:04: >[io  0x0070-0x0073]
[    0.121002] pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.121011] pnp 00:05: >[io  0x0061]
[    0.121037] pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.121046] pnp 00:06: >[io  0x00f0-0x00ff]
[    0.121052] pnp 00:06: >[irq 13]
[    0.121081] pnp 00:06: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.121293] pnp 00:07: >[io  0x03f8-0x03ff]
[    0.121298] pnp 00:07: >[irq 4]
[    0.121355] pnp 00:07: >Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121525] pnp 00:08: >[io  0x0378-0x037f]
[    0.121531] pnp 00:08: >[irq 7]
[    0.121579] pnp 00:08: >Plug and Play ACPI device, IDs PNP0400 (active)
[    0.121664] pnp 00:09: >[io  0x0060]
[    0.121666] pnp 00:09: >[io  0x0064]
[    0.121672] pnp 00:09: >[irq 1]
[    0.121704] pnp 00:09: >Plug and Play ACPI device, IDs PNP0303 (active)
[    0.121735] pnp 00:0a: >[io  0x0400-0x04cf]
[    0.121779] system 00:0a: >[io  0x0400-0x04cf] has been reserved
[    0.121782] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121968] pnp 00:0b: >[mem 0xe0000000-0xe3ffffff]
[    0.122024] system 00:0b: >[mem 0xe0000000-0xe3ffffff] has been reserved
[    0.122028] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122178] pnp 00:0c: >[mem 0x000cf400-0x000cffff]
[    0.122181] pnp 00:0c: >[mem 0x000f0000-0x000f7fff]
[    0.122183] pnp 00:0c: >[mem 0x000f8000-0x000fbfff]
[    0.122185] pnp 00:0c: >[mem 0x000fc000-0x000fffff]
[    0.122188] pnp 00:0c: >[mem 0xcfee0000-0xcfefffff]
[    0.122190] pnp 00:0c: >[mem 0x00000000-0x0009ffff]
[    0.122192] pnp 00:0c: >[mem 0x00100000-0xcfedffff]
[    0.122195] pnp 00:0c: >[mem 0xfec00000-0xfec00fff]
[    0.122197] pnp 00:0c: >[mem 0xfed13000-0xfed1dfff]
[    0.122199] pnp 00:0c: >[mem 0xfed20000-0xfed8ffff]
[    0.122201] pnp 00:0c: >[mem 0xfee00000-0xfee00fff]
[    0.122204] pnp 00:0c: >[mem 0xffb00000-0xffb7ffff]
[    0.122206] pnp 00:0c: >[mem 0xfff00000-0xffffffff]
[    0.122208] pnp 00:0c: >[mem 0x000e0000-0x000effff]
[    0.122271] system 00:0c: >[mem 0x000cf400-0x000cffff] has been reserved
[    0.122274] system 00:0c: >[mem 0x000f0000-0x000f7fff] could not be reserved
[    0.122276] system 00:0c: >[mem 0x000f8000-0x000fbfff] could not be reserved
[    0.122279] system 00:0c: >[mem 0x000fc000-0x000fffff] could not be reserved
[    0.122282] system 00:0c: >[mem 0xcfee0000-0xcfefffff] could not be reserved
[    0.122285] system 00:0c: >[mem 0x00000000-0x0009ffff] could not be reserved
[    0.122287] system 00:0c: >[mem 0x00100000-0xcfedffff] could not be reserved
[    0.122290] system 00:0c: >[mem 0xfec00000-0xfec00fff] could not be reserved
[    0.122293] system 00:0c: >[mem 0xfed13000-0xfed1dfff] has been reserved
[    0.122296] system 00:0c: >[mem 0xfed20000-0xfed8ffff] has been reserved
[    0.122298] system 00:0c: >[mem 0xfee00000-0xfee00fff] has been reserved
[    0.122301] system 00:0c: >[mem 0xffb00000-0xffb7ffff] has been reserved
[    0.122304] system 00:0c: >[mem 0xfff00000-0xffffffff] has been reserved
[    0.122307] system 00:0c: >[mem 0x000e0000-0x000effff] has been reserved
[    0.122310] system 00:0c: >Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.122329] pnp 00:0d: >[mem 0xffb80000-0xffbfffff]
[    0.122370] pnp 00:0d: >Plug and Play ACPI device, IDs INT0800 (active)
[    0.122376] pnp: PnP ACPI: found 14 devices
[    0.122377] ACPI: ACPI bus type pnp unregistered
[    0.122382] PnPBIOS: Disabled by ACPI PNP
[    0.158496] pci 0000:00:1c.0: >bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
[    0.158502] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[    0.158505] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[    0.158525] pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.158528] pci 0000:00:1c.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.158530] pci 0000:00:1c.0: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.158536] pci 0000:00:1c.0: >BAR 14: assigned [mem 0xe7300000-0xe74fffff]
[    0.158540] pci 0000:00:1c.0: >BAR 15: assigned [mem 0xe7500000-0xe76fffff 64bit pref]
[    0.158544] pci 0000:00:1c.0: >BAR 13: assigned [io  0x1000-0x1fff]
[    0.158548] pci 0000:01:00.0: >BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[    0.158551] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.158554] pci 0000:00:01.0: >  bridge window [io  0xc000-0xcfff]
[    0.158558] pci 0000:00:01.0: >  bridge window [mem 0xe4000000-0xe5ffffff]
[    0.158562] pci 0000:00:01.0: >  bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.158566] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[    0.158569] pci 0000:00:1c.0: >  bridge window [io  0x1000-0x1fff]
[    0.158574] pci 0000:00:1c.0: >  bridge window [mem 0xe7300000-0xe74fffff]
[    0.158578] pci 0000:00:1c.0: >  bridge window [mem 0xe7500000-0xe76fffff 64bit pref]
[    0.158585] pci 0000:03:00.0: >BAR 6: assigned [mem 0xe7020000-0xe702ffff pref]
[    0.158587] pci 0000:00:1c.3: >PCI bridge to [bus 03-03]
[    0.158590] pci 0000:00:1c.3: >  bridge window [io  0xd000-0xdfff]
[    0.158595] pci 0000:00:1c.3: >  bridge window [mem 0xe6000000-0xe6ffffff]
[    0.158599] pci 0000:00:1c.3: >  bridge window [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.158605] pci 0000:00:1e.0: >PCI bridge to [bus 04-04]
[    0.158612] pci 0000:00:1e.0: >  bridge window [mem 0xe7100000-0xe71fffff 64bit pref]
[    0.158657] pci 0000:00:1e.0: >setting latency timer to 64
[    0.158661] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
[    0.158663] pci_bus 0000:00: >resource 5 [io  0x0d00-0xffff]
[    0.158665] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[    0.158668] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
[    0.158670] pci_bus 0000:00: >resource 8 [mem 0xcff00000-0xfebfffff]
[    0.158672] pci_bus 0000:01: >resource 0 [io  0xc000-0xcfff]
[    0.158675] pci_bus 0000:01: >resource 1 [mem 0xe4000000-0xe5ffffff]
[    0.158677] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.158680] pci_bus 0000:02: >resource 0 [io  0x1000-0x1fff]
[    0.158682] pci_bus 0000:02: >resource 1 [mem 0xe7300000-0xe74fffff]
[    0.158684] pci_bus 0000:02: >resource 2 [mem 0xe7500000-0xe76fffff 64bit pref]
[    0.158687] pci_bus 0000:03: >resource 0 [io  0xd000-0xdfff]
[    0.158689] pci_bus 0000:03: >resource 1 [mem 0xe6000000-0xe6ffffff]
[    0.158692] pci_bus 0000:03: >resource 2 [mem 0xe7000000-0xe70fffff 64bit pref]
[    0.158694] pci_bus 0000:04: >resource 2 [mem 0xe7100000-0xe71fffff 64bit pref]
[    0.158697] pci_bus 0000:04: >resource 4 [io  0x0000-0x0cf7]
[    0.158699] pci_bus 0000:04: >resource 5 [io  0x0d00-0xffff]
[    0.158701] pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff]
[    0.158703] pci_bus 0000:04: >resource 7 [mem 0x000c0000-0x000dffff]
[    0.158706] pci_bus 0000:04: >resource 8 [mem 0xcff00000-0xfebfffff]
[    0.158741] NET: Registered protocol family 2
[    0.158804] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.158942] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.159283] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.159457] TCP: Hash tables configured (established 131072 bind 65536)
[    0.159459] TCP: reno registered
[    0.159462] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.159469] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.159531] NET: Registered protocol family 1
[    0.172048] pci 0000:01:00.0: >Boot video device
[    0.172060] PCI: CLS 32 bytes, default 64
[    0.172459] audit: initializing netlink socket (disabled)
[    0.172470] type=2000 audit(1363346218.168:1): initialized
[    0.193516] highmem bounce pool size: 64 pages
[    0.193527] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.195581] VFS: Disk quotas dquot_6.5.2
[    0.195628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.196183] fuse init (API version 7.19)
[    0.196263] msgmni has been set to 1636
[    0.196555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.196580] io scheduler noop registered
[    0.196582] io scheduler deadline registered (default)
[    0.196590] io scheduler cfq registered
[    0.196723] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[    0.196805] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[    0.196893] pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
[    0.196970] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.196990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.197080] intel_idle: does not run on family 6 model 23
[    0.197148] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.197152] ACPI: Power Button [PWRB]
[    0.197200] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.197202] ACPI: Power Button [PWRF]
[    0.197282] ACPI: Requesting acpi_cpufreq
[    0.359268] Freeing initrd memory: 14712k freed
[    0.364389] Marking TSC unstable due to TSC halts in idle
[    0.364400] ACPI: acpi_idle registered with cpuidle
[    0.366968] GHES: HEST is not enabled!
[    0.366993] isapnp: Scanning for PnP cards...
[    0.367058] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.387404] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.409653] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.409901] Linux agpgart interface v0.103
[    0.411442] brd: module loaded
[    0.412152] loop: module loaded
[    0.412278] ata_piix 0000:00:1f.2: >version 2.13
[    0.412293] ata_piix 0000:00:1f.2: >MAP [
[    0.412294]  P0 P2 P1 P3 ]
[    0.412328] ata_piix 0000:00:1f.2: >setting latency timer to 64
[    0.412594] scsi0 : ata_piix
[    0.412654] scsi1 : ata_piix
[    0.413138] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.413141] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.413446] Fixed MDIO Bus: probed
[    0.413494] tun: Universal TUN/TAP device driver, 1.6
[    0.413496] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.413530] PPP generic driver version 2.4.2
[    0.413569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.413597] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[    0.413601] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[    0.413606] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 1
[    0.413622] ehci_hcd 0000:00:1d.7: >using broken periodic workaround
[    0.417525] ehci_hcd 0000:00:1d.7: >cache line size of 32 is not supported
[    0.417550] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xe7204000
[    0.428015] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[    0.428050] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.428053] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.428055] usb usb1: >Product: EHCI Host Controller
[    0.428058] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.428060] usb usb1: >SerialNumber: 0000:00:1d.7
[    0.428159] hub 1-0:1.0: >USB hub found
[    0.428163] hub 1-0:1.0: >8 ports detected
[    0.428238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.428255] uhci_hcd: USB Universal Host Controller Interface driver
[    0.428274] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[    0.428277] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[    0.428283] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[    0.428305] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x0000e000
[    0.428334] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.428337] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.428339] usb usb2: >Product: UHCI Host Controller
[    0.428341] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.428343] usb usb2: >SerialNumber: 0000:00:1d.0
[    0.428428] hub 2-0:1.0: >USB hub found
[    0.428432] hub 2-0:1.0: >2 ports detected
[    0.428500] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[    0.428504] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[    0.428508] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 3
[    0.428544] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x0000e100
[    0.428570] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.428573] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.428575] usb usb3: >Product: UHCI Host Controller
[    0.428577] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.428579] usb usb3: >SerialNumber: 0000:00:1d.1
[    0.428660] hub 3-0:1.0: >USB hub found
[    0.428664] hub 3-0:1.0: >2 ports detected
[    0.428725] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[    0.428728] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[    0.428733] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 4
[    0.428763] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x0000e200
[    0.428790] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.428792] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.428794] usb usb4: >Product: UHCI Host Controller
[    0.428796] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.428798] usb usb4: >SerialNumber: 0000:00:1d.2
[    0.428879] hub 4-0:1.0: >USB hub found
[    0.428883] hub 4-0:1.0: >2 ports detected
[    0.428945] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
[    0.428948] uhci_hcd 0000:00:1d.3: >UHCI Host Controller
[    0.428953] uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 5
[    0.428982] uhci_hcd 0000:00:1d.3: >irq 16, io base 0x0000e300
[    0.429011] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.429013] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.429016] usb usb5: >Product: UHCI Host Controller
[    0.429018] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.429020] usb usb5: >SerialNumber: 0000:00:1d.3
[    0.429102] hub 5-0:1.0: >USB hub found
[    0.429106] hub 5-0:1.0: >2 ports detected
[    0.429208] usbcore: registered new interface driver libusual
[    0.429253] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.429254] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.429424] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.429504] mousedev: PS/2 mouse device common for all mice
[    0.429622] rtc_cmos 00:04: >RTC can wake from S4
[    0.429724] rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
[    0.429747] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.429797] device-mapper: uevent: version 1.0.3
[    0.429854] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.429882] EISA: Probing bus 0 at eisa.0
[    0.429884] EISA: Cannot allocate resource for mainboard
[    0.429885] Cannot allocate resource for EISA slot 1
[    0.429887] Cannot allocate resource for EISA slot 2
[    0.429888] Cannot allocate resource for EISA slot 3
[    0.429890] Cannot allocate resource for EISA slot 4
[    0.429891] Cannot allocate resource for EISA slot 5
[    0.429893] Cannot allocate resource for EISA slot 6
[    0.429894] Cannot allocate resource for EISA slot 7
[    0.429896] Cannot allocate resource for EISA slot 8
[    0.429897] EISA: Detected 0 cards.
[    0.429924] cpuidle: using governor ladder
[    0.429953] cpuidle: using governor menu
[    0.429954] EFI Variables Facility v0.08 2004-May-17
[    0.430105] ashmem: initialized
[    0.430227] TCP: cubic registered
[    0.430331] NET: Registered protocol family 10
[    0.430517] NET: Registered protocol family 17
[    0.430526] Key type dns_resolver registered
[    0.430597] Using IPI No-Shortcut mode
[    0.430680] PM: Hibernation image not present or could not be loaded.
[    0.430692] registered taskstats version 1
[    0.432966] Key type trusted registered
[    0.434743] Key type encrypted registered
[    0.436804]   Magic number: 5:991:276
[    0.436833] tty tty13: >hash matches
[    0.436879] rtc_cmos 00:04: >setting system clock to 2013-03-15 11:16:59 UTC (1363346219)
[    0.437653] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.437654] EDD information not available.
[    0.451643] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.572284] ata2.01: NODEV after polling detection
[    0.580270] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
[    0.580875] ata1.00: HPA detected: current 976771055, native 976773168
[    0.580879] ata1.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[    0.580881] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.596130] ata2.00: configured for UDMA/100
[    0.596896] ata1.00: configured for UDMA/133
[    0.720082] isapnp: No Plug & Play device found
[    0.720188] scsi 0:0:0:0: >Direct-Access     ATA      WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
[    0.720291] sd 0:0:0:0: >[sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[    0.720316] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    0.720330] sd 0:0:0:0: >[sda] Write Protect is off
[    0.720333] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    0.720350] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.749539]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    0.749945] sd 0:0:0:0: >[sda] Attached SCSI disk
[    0.750531] scsi 1:0:0:0: >CD-ROM            TSSTcorp CDDVDW SH-S223B  SB01 PQ: 0 ANSI: 5
[    0.752757] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.752760] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.752881] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[    0.752993] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[    0.753095] Freeing unused kernel memory: 756k freed
[    0.753341] Write protecting the kernel text: 5960k
[    0.753358] Write protecting the kernel read-only data: 2424k
[    0.753359] NX-protecting the kernel data: 4280k
[    0.769030] udevd[95]: starting version 175
[    0.819324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.819416] r8169 0000:03:00.0: >irq 43 for MSI/MSI-X
[    0.819590] r8169 0000:03:00.0: >eth0: RTL8168c/8111c at 0xf8418000, 00:24:1d:8d:23:0d, XID 1c4000c0 IRQ 43
[    0.819593] r8169 0000:03:00.0: >eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    0.924025] usb 4-1: >new low-speed USB device number 2 using uhci_hcd
[    1.105799] usb 4-1: >New USB device found, idVendor=045e, idProduct=00d1
[    1.105804] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.105808] usb 4-1: >Product: Microsoft Optical Mouse with Tilt Wheel
[    1.105811] usb 4-1: >Manufacturer: Microsoft
[    1.142875] usbcore: registered new interface driver usbhid
[    1.142879] usbhid: USB HID core driver
[    1.147133] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[    1.147967] hid-generic 0003:045E:00D1.0001: >input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:1d.2-1/input0
[    1.179834] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    1.179837] EXT4-fs (sda2): write access will be enabled during recovery
[    2.267340] EXT4-fs (sda2): recovery complete
[    2.274142] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.579921] Adding 1022972k swap on /dev/sda3.  Priority:-1 extents:1 across:1022972k 
[    9.585364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.613246] udevd[314]: starting version 175
[    9.652760] lp: driver loaded but no devices found
[    9.688885] [drm] Initialized drm 1.1.0 20060810
[    9.710555] intel_rng: FWH not detected
[    9.712355] [drm] radeon defaulting to kernel modesetting.
[    9.712358] [drm] radeon kernel modesetting enabled.
[    9.729497] [drm] initializing kernel modesetting (RV710 0x1002:0x9540 0x174B:0xE106).
[    9.729516] [drm] register mmio base: 0xE5000000
[    9.729517] [drm] register mmio size: 65536
[    9.729622] ATOM BIOS: 
[    9.729648] radeon 0000:01:00.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    9.729651] radeon 0000:01:00.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    9.734754] DVB: registering new adapter (Mantis DVB adapter)
[    9.742632] [drm] Detected VRAM RAM=512M, BAR=256M
[    9.742636] [drm] RAM width 64bits DDR
[    9.745171] [TTM] Zone  kernel: Available graphics memory: 426678 kiB
[    9.745175] [TTM] Zone highmem: Available graphics memory: 2066554 kiB
[    9.745177] [TTM] Initializing pool allocator
[    9.745182] [TTM] Initializing DMA pool allocator
[    9.745204] [drm] radeon: 512M of VRAM memory ready
[    9.745206] [drm] radeon: 512M of GTT memory ready.
[    9.745221] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.745222] [drm] Driver supports precise vblank timestamp query.
[    9.745266] radeon 0000:01:00.0: >irq 44 for MSI/MSI-X
[    9.745277] radeon 0000:01:00.0: >radeon: using MSI.
[    9.745309] [drm] radeon: irq initialized.
[    9.745314] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    9.746670] [drm] Loading RV710 Microcode
[    9.757026] ACPI Warning: 0xfed1f410-0xfed1f414 SystemMemory conflicts with Region \RCRB 1 (20120320/utaddress-251)
[    9.757033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.757035] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[    9.757038] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GP2C 1 (20120320/utaddress-251)
[    9.757042] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.757083] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.757484] leds_ss4200: no LED devices found
[    9.786786] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    9.808776] parport_pc 00:08: >reported by Plug and Play ACPI
[    9.808822] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.854871] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[    9.904653] lp0: using parport0 (interrupt-driven).
[    9.911238] ppdev: user-space parallel port driver
[    9.936264] Bluetooth: Core ver 2.16
[    9.936327] NET: Registered protocol family 31
[    9.936332] Bluetooth: HCI device and connection manager initialized
[    9.936336] Bluetooth: HCI socket layer initialized
[    9.936341] Bluetooth: L2CAP socket layer initialized
[    9.936347] Bluetooth: SCO socket layer initialized
[    9.947783] Bluetooth: RFCOMM TTY layer initialized
[    9.947789] Bluetooth: RFCOMM socket layer initialized
[    9.947790] Bluetooth: RFCOMM ver 1.11
[    9.974719] type=1400 audit(1363342629.035:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=601 comm="apparmor_parser"
[    9.975231] type=1400 audit(1363342629.035:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=601 comm="apparmor_parser"
[   10.014298] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[   10.044086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.044090] Bluetooth: BNEP filters: protocol multicast
[   10.089803] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.092559] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.092707] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.094702] init: failsafe main process (662) killed by TERM signal
[   10.096221] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.098501] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.098628] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.101316] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.103481] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.164160] type=1400 audit(1363342629.227:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=738 comm="apparmor_parser"
[   10.164519] type=1400 audit(1363342629.227:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=738 comm="apparmor_parser"
[   10.172932] type=1400 audit(1363342629.235:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=739 comm="apparmor_parser"
[   10.173290] type=1400 audit(1363342629.235:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=739 comm="apparmor_parser"
[   10.180406] type=1400 audit(1363342629.243:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=743 comm="apparmor_parser"
[   10.180764] type=1400 audit(1363342629.243:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=743 comm="apparmor_parser"
[   10.189731] type=1400 audit(1363342629.251:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
[   10.191470] type=1400 audit(1363342629.251:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
[   10.221354] r8169 0000:03:00.0: >eth0: link down
[   10.221362] r8169 0000:03:00.0: >eth0: link down
[   10.221723] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.222109] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.273080] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   10.277938] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[   10.288811] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.303768] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   10.303835] radeon 0000:01:00.0: >WB enabled
[   10.303838] radeon 0000:01:00.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc60c00
[   10.350594] [drm] ring test on 0 succeeded in 1 usecs
[   10.350753] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.351460] [drm] Radeon Display Connectors
[   10.351462] [drm] Connector 0:
[   10.351464] [drm]   VGA-1
[   10.351466] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   10.351467] [drm]   Encoders:
[   10.351469] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   10.351470] [drm] Connector 1:
[   10.351472] [drm]   HDMI-A-1
[   10.351473] [drm]   HPD1
[   10.351475] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[   10.351476] [drm]   Encoders:
[   10.351477] [drm]     DFP1: INTERNAL_UNIPHY
[   10.351479] [drm] Connector 2:
[   10.351480] [drm]   DVI-I-1
[   10.351481] [drm]   HPD4
[   10.351483] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   10.351484] [drm]   Encoders:
[   10.351486] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   10.351487] [drm]     DFP2: INTERNAL_UNIPHY2
[   10.351505] [drm] Internal thermal controller with fan control
[   10.351566] [drm] radeon: power management initialized
[   10.433838] [drm] fb mappable at 0xD0142000
[   10.433842] [drm] vram apper at 0xD0000000
[   10.433843] [drm] size 5242880
[   10.433844] [drm] fb depth is 24
[   10.433846] [drm]    pitch is 5120
[   10.434037] fbcon: radeondrmfb (fb0) is primary device
[   10.434640] Console: switching to colour frame buffer device 160x64
[   10.434680] fb0: radeondrmfb frame buffer device
[   10.434682] drm: registered panic notifier
[   10.434690] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 0
[   10.434757] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.434824] snd_hda_intel 0000:01:00.1: >irq 46 for MSI/MSI-X
[   10.488538] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   10.643419] stb0899_attach: Attaching STB0899 
[   10.650187] stb6100_attach: Attaching STB6100 
[   10.652403] LNBx2x attached on addr=8
[   10.652407] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[   11.835353] r8169 0000:03:00.0: >eth0: link up
[   11.835519] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  747.174707] audit_printk_skb: 39 callbacks suppressed
[  747.174712] type=1400 audit(1363343366.234:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=19489 comm="apparmor_parser"
[  747.175194] type=1400 audit(1363343366.234:26): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=19489 comm="apparmor_parser"
[  747.263611] type=1400 audit(1363343366.322:27): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=19535 comm="apparmor_parser"
[  747.265190] type=1400 audit(1363343366.326:28): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=19535 comm="apparmor_parser"
[  778.215675] type=1400 audit(1363343397.274:29): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=20324 comm="apparmor_parser"
[  778.215821] type=1400 audit(1363343397.274:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=20324 comm="apparmor_parser"
[  778.215930] type=1400 audit(1363343397.274:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=20324 comm="apparmor_parser"
[  784.056618] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[  784.062271] JFS: nTxBlock = 8192, nTxLock = 65536
[  784.098569] NTFS driver 2.1.30 [Flags: R/O MODULE].
[  784.125991] QNX4 filesystem 0.2.3 registered.
[  784.154965] Btrfs loaded

Odpovědi

[kuka]

Normalni to urcite neni. Dmesg te v tomto asi nikam neposune, protoze zapis z principu zacina az po tom, co je grubem zavedeno odpovidajici jadro. Spis bych se zkusil podival do biosu na bootovaci sekvenci a tak vubec.

[jany2]

Tak aspon je tam vidiet o aky HW sa jedna :) skusim este pozret BIOS, ale skor neviem ktore zalezitosti by mohli zapricinovat taky dlhy nabeh.

Zvycajne ako dlho trva od zapnutia po zobrzaenie zavadzaca ?

[Petr Šobáň]

Většinou je to problém biosu a detekce různého HW.

Prostě projít BIOS a proskoumat různé auto položky a skusit je nastavit na hodnoty.

Převážně u detekce USB, řadičů HDD, vypnout test paměti, nastavit primární grafiku.

A někdy to nejde - u jednoho MB zdržovala náběh DVD mechanika - po odpojení OK (Někdy to brzdí jak je v ní zapomenuté DVD, někdy zase jak tam žádné není )

Prostě vypnout úvodní obrazovku aby jsi viděl co bios vypisuje a skoušet....

Skontrolovat zda není novější bios pro tvoji desku.