abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×
eParkomat, startup z ČR, postoupil mezi finalisty evropského akcelerátoru ChallengeUp!
Robot na pivo mu otevřel dveře k opravdovému byznysu
Internet věcí: Propojený svět? Už se to blíží...
dnes 16:38 | Komunita

Byly zveřejněny videozáznamy přednášek a workshopů z letošní konference OpenAlt konané 5. a 6. listopadu v Brně. K videozáznamům lze přistupovat ze stránky na SuperLectures nebo přes program konference, detaily o vybrané přednášce nebo workshopu a dále kliknutím na ikonku filmového pásu. Celkově bylo zpracováno 65 hodin z 89 přednášek a workshopů.

Ladislav Hagara | Komentářů: 0
dnes 11:30 | Komunita

Bylo oznámeno, že bude proveden bezpečnostní audit zdrojových kódů open source softwaru pro implementaci virtuálních privátních sítí OpenVPN. Audit provede Matthew D. Green (blog), uznávaný kryptolog a profesor na Univerzitě Johnse Hopkinse. Auditována bude verze 2.4 (aktuálně RC 1, stabilní verze je 2.3.14). Audit bude financován společností Private Internet Access [reddit].

Ladislav Hagara | Komentářů: 0
dnes 06:00 | Komunita

Na YouTube byl publikován Blender Institute Reel 2016, ani ne dvouminutový sestřih z filmů, které vznikly za posledních 10 let díky Blender Institutu. V institutu aktuálně pracují na novém filmu Agent 327. Dění kolem filmu lze sledovat na Blender Cloudu. Videoukázka Agenta 327 z června letošního roku na YouTube.

Ladislav Hagara | Komentářů: 0
dnes 01:02 | Zajímavý článek

Minulý týden byly vydány verze 1.2.3 a 1.1.7 webového poštovního klienta Roundcube. V oznámení o vydání bylo zmíněno řešení bezpečnostního problému nalezeného společností RIPS a souvisejícího s voláním funkce mail() v PHP. Tento týden byly zveřejněny podrobnosti. Útočník mohl pomocí speciálně připraveného emailu spustit na serveru libovolný příkaz. Stejně, jak je popsáno v článku Exploit PHP’s mail() to get remote code execution z roku 2014.

Ladislav Hagara | Komentářů: 1
včera 16:00 | Nová verze

Byla vydána verze 0.98 svobodného nelineárního video editoru Pitivi. Z novinek lze zmínit například přizpůsobitelné klávesové zkratky. Videoukázka práce s nejnovější verzí Pitivi na YouTube.

Ladislav Hagara | Komentářů: 1
včera 15:00 | Zajímavý software

Stop motion je technika animace, při níž je reálný objekt mezi jednotlivými snímky ručně upravován a posouván o malé úseky, tak aby po spojení vyvolala animace dojem spojitosti. Jaký software lze pro stop motion použít na Linuxu? Článek na OMG! Ubuntu! představuje Heron Animation. Ten bohužel podporuje pouze webové kamery. Podpora digitálních zrcadlovek je začleněna například v programu qStopMotion.

Ladislav Hagara | Komentářů: 5
7.12. 21:21 | Nová verze Ladislav Hagara | Komentářů: 0
7.12. 11:44 | Zajímavý projekt

Na Indiegogo byla spuštěna kampaň na podporu herní mini konzole a multimediálního centra RetroEngine Sigma od Doyodo. Předobjednat ji lze již od 49 dolarů. Požadovaná částka 20 000 dolarů byla překonána již 6 krát. Majitelé mini konzole si budou moci zahrát hry pro Atari VCS 2600, Sega Genesis nebo NES. Předinstalováno bude multimediální centrum Kodi.

Ladislav Hagara | Komentářů: 2
7.12. 00:10 | Nová verze

Byla vydána verze 4.7 redakčního systému WordPress. Kódové označením Vaughan bylo vybráno na počest americké jazzové zpěvačky Sarah "Sassy" Vaughan. Z novinek lze zmínit například novou výchozí šablonu Twenty Seventeen, náhledy pdf souborů nebo WordPress REST API.

Ladislav Hagara | Komentářů: 10
6.12. 12:00 | Zajímavý projekt

Projekt Termbox umožňuje vyzkoušet si linuxové distribuce Ubuntu, Debian, Fedora, CentOS a Arch Linux ve webovém prohlížeči. Řešení je postaveno na projektu HyperContainer. Podrobnosti v často kladených dotazech (FAQ). Zdrojové kódy jsou k dispozici na GitHubu [reddit].

Ladislav Hagara | Komentářů: 27
Kolik máte dat ve svém domovském adresáři na svém primárním osobním počítači?
 (32%)
 (24%)
 (29%)
 (7%)
 (5%)
 (3%)
Celkem 803 hlasů
 Komentářů: 50, poslední 29.11. 15:50
Rozcestník
Reklama

Dotaz: pomaly start X

jose17 avatar 16.9.2005 23:02 jose17 | skóre: 43 | blog: Joseho_blog | Košice/Nové Mesto nad Váhom
pomaly start X
Přečteno: 137×
prosim Vas o pomoc pri odstraneni zbytocneho cakania pri starte X. monitor niekolko sekund preblikava (asi testuje rozlisenia), nemam ziadne delo, ale pri starte win32 sa prepne z textoveho rezimu takpovediac okamzite.

diky za pripadne napady,

-- jose

log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/darkstar:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.26 i686 [ELF] 
Current Operating System: Linux darkstar 2.4.26 #6 Mon Jun 14 19:07:27 PDT 2004 i586
Build Date: 05 June 2004
	Before reporting problems, check http://wiki.X.Org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 16 22:50:51 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbLayout" "sk,en_US"
(**) XKB: layout: "sk,en_US"
(**) Option "XkbOptions" "grp:switch,grp:shift_toggle,grp_led:scroll"
(**) XKB: options: "grp:switch,grp:shift_toggle,grp_led:scroll"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "NoPM" "true"
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.2
	X.Org Video Driver: 0.7
	X.Org XInput driver : 0.4
	X.Org Server Extension : 0.2
	X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(--) using VT number 3

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0530 card 0000,0000 rev 03 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev b1 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0009 card 0000,0000 rev 00 class ff,00,00 hdr 80
(II) PCI: 00:01:2: chip 1039,7001 card 0000,0000 rev 11 class 0c,03,10 hdr 80
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 1039,6306 card 1039,6306 rev a3 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[1] -1	0	0x0000c400 - 0x0000c4ff (0x100) IX[B]
	[2] -1	0	0x0000c800 - 0x0000c8ff (0x100) IX[B]
	[3] -1	0	0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xe7e00000 - 0xe7efffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xfec00000 - 0xffcfffff (0x1100000) MX[B]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS530 3D PCI/AGP rev 163, Mem @ 0xff000000/23, 0xe7ef0000/16, I/O @ 0xcc00/7
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[1] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[2] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[3] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[4] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[5] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[6] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[7] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[8] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[9] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[10] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[11] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[12] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[1] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[2] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[3] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[4] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[5] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[6] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[7] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[8] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[9] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[10] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[11] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[12] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[6] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[9] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[13] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[14] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[15] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[16] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[17] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[19] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 6.7.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.1
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 0.7.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/661FX/M661FX/M661MX/741/741GX/M741/760/M760
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS530/620 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[6] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[9] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[13] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[14] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[15] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[16] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[17] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[19] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[6] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[7] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[8] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[9] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[10] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[11] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[12] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[16] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[17] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[18] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[19] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[20] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[22] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
	[23] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[24] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) SIS(0): SiS driver (2004/02/26-1)
(II) SIS(0): Copyright (C) 2001-2004 Thomas Winischhofer (thomas@winischhofer.net) and others
(II) SIS(0): Compiled for X.Org 4.3.99.902
(II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for documentation and updates
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 0.7
(--) SIS(0): Relocated IO registers at 0xCC00
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) SIS(0): Fast VRAM enabled (for write only)
(==) SIS(0): Using HW cursor
(==) SIS(0): TurboQueue disabled
(==) SIS(0): DRI disabled
(--) SIS(0): Memory clock: 100.000 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xFF000000
(--) SIS(0): MMIO registers at 0xE7EF0000 (size 64K)
(--) SIS(0): VideoRAM: 8192 KB
(II) SIS(0): Using 8190K of framebuffer memory
(--) SIS(0): Hardware supports one video overlay
(II) SIS(0): CRT1 gamma correction is enabled
(--) SIS(0): Maximum pixel clock at 32 bpp is 140 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 0.7
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 2.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6306
(II) SIS(0): VESA VBE OEM Product Rev: 0A
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level none
(II) SIS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) SIS(0): VESA VBE DDC read failed
(==) SIS(0): Min pixel clock is 5 MHz
(--) SIS(0): Max pixel clock is 140 MHz
(II) SIS(0): My Monitor: Using hsync range of 31.50-50.00 kHz
(II) SIS(0): My Monitor: Using vrefresh range of 40.00-70.00 Hz
(II) SIS(0): Clock range:   5.00 to 140.00 MHz
(II) SIS(0): Not using default mode "640x350" (vrefresh out of range)
(II) SIS(0): Not using default mode "320x175" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x400" (vrefresh out of range)
(II) SIS(0): Not using default mode "320x200" (vrefresh out of range)
(II) SIS(0): Not using default mode "720x400" (vrefresh out of range)
(II) SIS(0): Not using default mode "360x200" (vrefresh out of range)
(II) SIS(0): Not using default mode "320x240" (vrefresh out of range)
(II) SIS(0): Not using default mode "320x240" (vrefresh out of range)
(II) SIS(0): Not using default mode "320x240" (vrefresh out of range)
(II) SIS(0): Not using default mode "400x300" (vrefresh out of range)
(II) SIS(0): Not using default mode "400x300" (vrefresh out of range)
(II) SIS(0): Not using default mode "400x300" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "512x384" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "512x384" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "512x384" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "512x384" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "576x432" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (hsync out of range)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (hsync out of range)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (hsync out of range)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "832x624" (vrefresh out of range)
(II) SIS(0): Not using default mode "416x312" (vrefresh out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "700x525" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "700x525" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1024" (hsync out of range)
(II) SIS(0): Not using default mode "800x512" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1152x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1024x768" (width too large for virtual size)
(--) SIS(0): Virtual size is 800x600 (pitch 800)
(**) SIS(0): *Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SIS(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) SIS(0): *Mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SIS(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) SIS(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) SIS(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) SIS(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) SIS(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) SIS(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SIS(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) SIS(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SIS(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) SIS(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SIS(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.2
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 6.7.0, module version = 1.1.0
	ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B]
	[1] 0	0	0xff000000 - 0xff7fffff (0x800000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xeffff000 - 0xefffffff (0x1000) MX[B]
	[8] -1	0	0xefffe000 - 0xefffefff (0x1000) MX[B]
	[9] -1	0	0xe8000000 - 0xe7ffffff (0x0) MX[B]O
	[10] -1	0	0xe7ef0000 - 0xe7efffff (0x10000) MX[B](B)
	[11] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[15] 0	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000de00 - 0x0000de07 (0x8) IX[B]
	[19] -1	0	0x0000dc00 - 0x0000dc1f (0x20) IX[B]
	[20] -1	0	0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
	[21] -1	0	0x00000374 - 0x00000374 (0x1) IX[B]
	[22] -1	0	0x00000170 - 0x00000170 (0x1) IX[B]
	[23] -1	0	0x000003f4 - 0x000003f4 (0x1) IX[B]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[25] -1	0	0x0000cc00 - 0x0000cc7f (0x80) IX[B](B)
	[26] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[27] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 2.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6306
(II) SIS(0): VESA VBE OEM Product Rev: 0A
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xc880
(==) SIS(0): Write-combining range (0xff000000,0x800000)
(II) SIS(0): Frame Buffer From (0,0) To (800,2619)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): Using SiS5597/5598/6326/530/620 HW Xv
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "imps/2"
(**) Mouse1: Device: "/dev/input/mouse0"
(**) Mouse1: Protocol: "imps/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mouse0"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
              vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
              vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
              vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
GetModeLine - scrn: 0 clock: 25200
GetModeLine - hdsp: 640 hbeg: 656 hend: 752 httl: 800
              vdsp: 480 vbeg: 490 vend: 492 vttl: 525 flags: 10
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
              vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
              vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
(II) 3rd Button detected: disabling emulate3Button

Ja vim, on vi, ty nano!

Odpovědi

Josef Kufner avatar 16.9.2005 23:46 Josef Kufner | skóre: 66
Rozbalit Rozbalit vše Re: pomaly start X
To asi nemas v /etc/X11/xorg.conf (ci tak nejak) napsana rozliseni ktera tvuj monitor umi, a/nebo mas zapnuty ten modul na detekci co monitor umi (promin, nazev si nevzpominam). Priklanim se spis k druhe variante, ale ty rozliseni si zkontroluj taky.
Hello world ! Segmentation fault (core dumped)
jose17 avatar 17.9.2005 00:16 jose17 | skóre: 43 | blog: Joseho_blog | Košice/Nové Mesto nad Váhom
Rozbalit Rozbalit vše Re: pomaly start X
mam pocit, ze rozlisenia su nadefinovane dobre. pre istotu posielam xorg.conf:
Section "Module"
    Load        "dbe"  	# Double buffer extension
    Load        "type1"
    Load        "freetype"
    Load        "speedo"
    Load       "glx"
    Load       "dri"
EndSection

Section "Files"
    RgbPath	"/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection

Section "ServerFlags"
    Option "NoPM" "true"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"Keyboard"
    Option     "XkbLayout"     "sk,en_US"
    Option "XkbOptions" "grp:switch,grp:shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver	"mouse"
    Option "Protocol"    "imps/2"
    Option "Device"      "/dev/input/mouse0"
    Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier  "My Monitor"
    Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
    Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
    HorizSync   31.5 - 50.0
    VertRefresh 40-70
EndSection

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "sis"
EndSection

Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"
    DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "800x600" "640x480"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Simple Layout"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Ja vim, on vi, ty nano!
jose17 avatar 17.9.2005 17:41 jose17 | skóre: 43 | blog: Joseho_blog | Košice/Nové Mesto nad Váhom
Rozbalit Rozbalit vše Re: pomaly start X
este dodam, ze monitor stmavne na cca 10--11 sekund.. na 45 sekundovom starte sa to da celkom poznat..
Ja vim, on vi, ty nano!

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267   www.czech-server.cz
© 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.