Fedora 40 release party v Praze proběhne v pátek 17. května od 18:30 v prostorách společnosti Etnetera Core na adrese Jankovcova 1037/49, Praha 7. Součástí bude program kratších přednášek o novinkách ve Fedoře.
Stack Overflow se dohodl s OpenAI o zpřístupnění obsahu Stack Overflow pro vylepšení OpenAI AI modelů.
AlmaLinux byl vydán v nové stabilní verzi 9.4 (Mastodon, 𝕏). S kódovým názvem Seafoam Ocelot. Přehled novinek v příspěvku na blogu a v poznámkách k vydání.
Před 50 lety, 5. května 1974 v žurnálu IEEE Transactions on Communications, Vint Cerf a Bob Kahn popsali protokol TCP (pdf).
Bylo vydáno do češtiny přeložené číslo 717 týdeníku WeeklyOSM přinášející zprávy ze světa OpenStreetMap.
Byla vydána (Mastodon, 𝕏) nová stabilní verze 2.10.38 svobodné aplikace pro úpravu a vytváření rastrové grafiky GIMP (GNU Image Manipulation Program). Přehled novinek v oznámení o vydání a v souboru NEWS na GitLabu. Nový GIMP je již k dispozici také na Flathubu.
Google zveřejnil seznam 1220 projektů od 195 organizací (Debian, GNU, openSUSE, Linux Foundation, Haiku, Python, …) přijatých do letošního, již dvacátého, Google Summer of Code.
Na základě DMCA požadavku bylo na konci dubna z GitHubu odstraněno 8535 repozitářů se zdrojovými kódy open source emulátoru přenosné herní konzole Nintendo Switch yuzu.
Webový prohlížeč Dillo (Wikipedie) byl vydán ve verzi 3.1.0. Po devíti letech od vydání předchozí verze 3.0.5. Doména dillo.org již nepatří vývojářům Dilla.
O víkendu probíhá v Bostonu, a také virtuálně, konference LibrePlanet 2024 organizovaná nadací Free Software Foundation (FSF).
2.1.2006 23:39
Johny z Podoli | skóre: 26
| blog: rocfdebian
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
NET: Registered protocol family 17
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
3.1.2006 00:10
Johny z Podoli | skóre: 26
| blog: rocfdebian
/dev/hda:
Model=HDT722516DLAT80, FwRev=V43OA70A, SerialNo=VD271BTCC5722C
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=51
BuffType=DualPortCache, BuffSize=7674kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 *udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: Reserved:
* signifies the current active mode
3.1.2006 00:16
Johny z Podoli | skóre: 26
| blog: rocfdebian
dream:~# smartctl -a /dev/hda smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: HDT722516DLAT80 Serial Number: VD271BTCC5722C Firmware Version: V43OA70A Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Tue Jan 3 00:15:47 2006 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled SMART Disabled. Use option -s with argument 'on' to enable it.jdu zkusit ten kabel.
3.1.2006 00:19
Johny z Podoli | skóre: 26
| blog: rocfdebian
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: HDT722516DLAT80 Serial Number: VD271BTCC5722C Firmware Version: V43OA70A Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Tue Jan 3 00:18:12 2006 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (3385) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 57) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 122 122 024 Pre-fail Always - 319 (Average 254) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 23 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2851 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 142 193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 142 194 Temperature_Celsius 0x0002 166 166 000 Old_age Always - 33 (Lifetime Min/Max 22/43) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 91 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 91 occurred at disk power-on lifetime: 2851 hours (118 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 7e 32 99 e0 Error: ICRC, ABRT at LBA = 0x0099327e = 10039934 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 40 3f 2b 99 e0 00 01:02:01.100 WRITE DMA EXT 35 00 50 e7 2a 99 e0 00 01:02:01.100 WRITE DMA EXT 35 00 08 d7 2a 99 e0 00 01:02:01.100 WRITE DMA EXT 35 00 08 97 c6 00 e0 00 01:02:01.100 WRITE DMA EXT 35 00 c8 cf c5 00 e0 00 01:02:01.100 WRITE DMA EXT Error 90 occurred at disk power-on lifetime: 2851 hours (118 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 1e 06 38 e5 Error: ICRC, ABRT at LBA = 0x0538061e = 87557662 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 10 0f 06 38 e0 00 00:51:58.200 WRITE DMA EXT 35 00 10 ef 05 38 e0 00 00:51:58.200 WRITE DMA EXT 35 00 08 cf 05 38 e0 00 00:51:58.200 WRITE DMA EXT 35 00 08 b7 05 38 e0 00 00:51:58.200 WRITE DMA EXT 35 00 08 9f 05 38 e0 00 00:51:58.200 WRITE DMA EXT Error 89 occurred at disk power-on lifetime: 2851 hours (118 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 d6 0d 99 e0 Error: ICRC, ABRT at LBA = 0x00990dd6 = 10030550 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 d7 05 99 e0 00 00:51:24.700 WRITE DMA EXT 35 00 18 bf 00 99 e0 00 00:51:24.700 WRITE DMA EXT 35 00 50 67 00 99 e0 00 00:51:24.700 WRITE DMA EXT 35 00 08 57 00 99 e0 00 00:51:24.700 WRITE DMA EXT 35 00 08 a7 b7 00 e0 00 00:51:24.700 WRITE DMA EXT Error 88 occurred at disk power-on lifetime: 2851 hours (118 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 36 d2 39 e5 Error: ICRC, ABRT at LBA = 0x0539d236 = 87675446 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 60 d7 d1 39 e0 00 00:51:23.700 WRITE DMA EXT 35 00 38 b7 c1 8d e0 00 00:51:23.700 WRITE DMA EXT 35 00 18 6f f4 9f e0 00 00:51:23.700 WRITE DMA EXT 25 00 08 3f 01 3b e0 00 00:51:23.500 READ DMA EXT 25 00 08 77 00 39 e0 00 00:51:23.500 READ DMA EXT Error 87 occurred at disk power-on lifetime: 2851 hours (118 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 16 8d 00 e0 Error: ICRC, ABRT at LBA = 0x00008d16 = 36118 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 50 c7 8c 00 e0 00 00:46:14.900 WRITE DMA EXT 35 00 c8 3f e3 9f e0 00 00:46:14.900 WRITE DMA EXT 35 00 48 27 e2 9f e0 00 00:46:14.900 WRITE DMA EXT 35 00 60 bf e1 9f e0 00 00:46:14.900 WRITE DMA EXT 35 00 08 bf 8c 00 e0 00 00:46:14.900 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
3.1.2006 00:12
Johny z Podoli | skóre: 26
| blog: rocfdebian
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 0000:00:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 34) 0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:11.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) 0000:00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 03)
3.1.2006 00:39
Johny z Podoli | skóre: 26
| blog: rocfdebian
3.1.2006 00:52
Johny z Podoli | skóre: 26
| blog: rocfdebian
3.1.2006 14:09
Johny z Podoli | skóre: 26
| blog: rocfdebian
Tiskni
Sdílej:
